Gas Leakage Detector with SMS Alert Using GSM Module & Arduino
ฝัง
- เผยแพร่เมื่อ 5 พ.ค. 2019
- In this project we are going to learn how to design a Gas Leakage Detector with SMS Alert using GSM Module & Arduino. We will interface Sim800 GSM Module as well as MQ135 Gas Sensor with Arduino. The gas level value will be displayed on 16x2 LCD Display. Whenever the excess gas is detected SMS will be sent to a particular phone number.
Smoke and gas leakage detectors are very useful in detecting smoke or fire in buildings, and so are the important safety parameters in order to prevent disasters. Bursting cylinders and accidential fires has caused lots of harm to the economies in the past. This circuit triggers the alert system when smoke or gas leakage is detected.The circuit mainly uses MQ135 Smoke/Gas sensor and Arduino to detect and smoke and gas leak. This MQ135 gas sensor is sensible to LPG, Alcohol, and Methane etc.It detects the presence of a dangerous LPG leak in your car or in a service station, storage tank environment. The sensor has excellent sensitivity combined with a quick response time. The sensor can also sense iso-butane, propane, LNG and cigarette smoke. If the LPG sensor senses any gas leakage from storage the output of this sensor goes low. This low signal is monitored by the microcontroller and sends the signal to GSM module to send messages as “Gas Leakage” to a mobile number written in code.
You can also use SIM900 or any other GSM Module instead of SIM800. Similarly you can use MQ2/MQ3/MQ5 or any other Gas/Smoke Sensor instead of MQ135.
Source Code/Program Link: how2electronics.com/gas-leaka...
..............................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe our channel for more Electronics project and tutorials.
Website: how2electronics.com
Facebook: / electronicsbyalex - วิทยาศาสตร์และเทคโนโลยี
Nice information 😃💕
this video has a good project!!!
Nice video & nice explanation
Very nice project bro 🔥🔥
Congratulations. Very nice.
Very good project 👍
Bro explain
Please explain to me how did you get the calibration and the gas level? What is the usual alarming gas level?
hey nice project nice work but what if this contains short circuit near gas cylinder and it turns big flame or a blast is there any kind of circuit breaker or fuse that stop from blast or big flames
thank you..
plz reply on this
Have you used me xcel for the writing of codes?
I have to make this project in very less time please give me an answer as soon as possible
Excelent
thanks it is a good project
Which buzzer you have taken any specifications?
thank you sir
On which simulation software you tested it before implementing it sir!
can it work with other sim rather than 800 or 900 frequency range
Do I have to keep the Arduino connected with the computer?
Bro we are in petroleum, and we slected this project so would you help that how we attach the wiring
Sir can you explain me which technology you used in that project
Hi, sim 800 GSM does it work only for 2G SIM , because we are trying from 3G/4G SIM unable to pass on it. Could you pls comment on this
I want to add a external buzzer with this so, what can i do?
Hello sir, I need LPG gas leakage detector with using GSM module and solenoid valve to off the gas automatically..I need this explain video please sir reply me 🙏...
Can u plzz suggest how can i add a buzzer
Can we change the another gsm module, will it works
Sir please about buzzer how you have connected?
Sir can I connect Four different sensor the same project ? If I can. How can I write the code and how related to LCD, and send SMS to mobile can you help me please.
My mq5 sensor detects but in lcd it showing 0% only , can you help me ?
which controller you use in this project
Bro I have one doubt sir.....why fixing rx and tx in 8 and 7 pins
Sir plz help me my soft were is not compiling. But how your compilation come success full. I have the same soft were plz plz plz help
Is the wires used are male to female jumper wires
Can you write a code to tell the phone when the power cuts are?
Can I add fans and buzzer to this project
Sir gas will be monitering and level was displayed.but sms will be not send. Any resigns.please reply immediately.please sir
How much distance the SMS will come ?
It shows as SMS SENT but we didn't receive SMS in our phone.please tell a solution
Hey sir, can i use telegram instead of gsm to send the signal?
can i use an extra dc fan here?
Sir,we done this project as our miniproject.The gas leakage is detected but the message is not received.Can u plz solve the problem for me.
how sim inserted in gsm and message received in mobile?
I have made all the connections perfect but the lcd is not printing anything . My potentiometer also got burnt .sir plz help me !!!
Is it possible to generate multiple phone numbers or numbers manually from outside? That's will be perfect
yes put it in a array
Hey sir, is that connected to pc?
Can i ask for the library sir? please...
Please make a vedio on rain water sensor like if rain comes a shield using servo will cover the house or any other thing
In future i will definately make. Thanks :)
Why there is need of potentiometer
bro can u give the project program link
hello sir, i would like know, if i add fire and gas sensor together with a buzzer sir..
if can i would like to know the connection and the coding please sir
Maine code run Kiya aapke circuit diagram ko dekhe par display pahale shoe nhi kar rha haii bina has detection ke
What kind of sim card do you use for GSM module SIM 800?
Any 2G/3G Sim
Thank you for replying. Is it Micro size?
Sir can we use 4g sim
HOW TO REDUCE NUMBER OF TEXT SMS SEND BY GSM MODULE
I don't need any sma alert in my project, so if i don't connect gsm module , what changes need in program and also in connections ?
Simply dont connect gsm module.
@@HowtoElectronics thanks , i will give a try.
@@HowtoElectronics do you know about the sensors for detection of hydrocarbon under the sea, actually we have a project to build a prototype of sea, in which we take a fish tank and from bottom we gona put a layer of sea sand than a layer of hydrocarbon or petrol than other layer of sand than sea water and some air space , and we have to detect that is there any hydrocarbon under sea , if you know any thing about that or any idea so please let me know.
How can i use 4g sim?
I have arduino,gsm module 900a,MQ-6 but
i have not LCD can do same project?
Yes you can do
Use serial monitor of arduino to test the working of device instead of lcd.
Can I plz get ur mail.. I'm doing the exact project but using 2 ir sensors.... I need to know much about that.. Pls bro
I am unable to upload code
i want buy ...
Bro, can you send a soft document of this project to us in which show the how the wiring and coding for sending sms.
Visit the link in description
Visit from pc, the code is invisible to mobile users
@@HowtoElectronics sir i just want to know that is there any need to give power supply to breadboard
Plz respond me tell me the variable resistor value you added on the circuit??????plzzzz
10k
What is the circular object kept between the Android and LCD
potentiometer
Cost of this project
Sir can we use arduino nano plz respond me quick !!!
Any arduino board can be used
Bro the problem is when ever we on gas for cooking purpose it ding ding
SMS alert ravatle bro
Can u pls add the load cell with this project and modify the source code pls pls pls pls 🥺
without using code in Arduino we can simulate the circuit
I don’t found any code. Please give me the code
What is the name of that round structure inbetween lcd and arduino..? Kindly anyone say
10K potentiometer
There is a small component you have connected with the lcd display , can you please tell the name of that component?
i think its a potentiometer
what is the value of potentimeter
Can we use any other gsm module
Definately you can. I already said this in video
Can I use gsm module sim 800l will that work????
Any gsm modem with 2g/3g support will work
WHAT IS THE COST OF THE
PROJECT
Can I use GSM module sim800L?
i have that quetion too
Great.
please can I have your contact am interested in this project
What is the solution? What if am in a place that is in a distance of 5 km from my kitchen...what should I do? Mere detection is not enough ...so solution is must...anyone know the solution?
Project report मिलेगा क्या
Which one is better MQ2 or MQ135
All are better. U can use any
@@HowtoElectronics you are great
Why the potentiometer is used
For adjusting LCD Contrast
Sir can we use gsm 900A
Yes
@@HowtoElectronics you are really good,
But I request you 5-6 times about power factor improvement using Arduino, please make it soon
Sir document vunda e project
Bro can we get message on 2 mobile num of gas leakage...
Check the code and try doing some modification
@@HowtoElectronics is this posible or not?
1st comment hit like
Sir my lcd is not printing anything!!!!!!!!!
Plz help me
Check lcd connection. Use potentiometer 10K at pin3 of LCD and rotate it to adjust contrast.
You said copy the code ? Where to copy? Krna kaha h copy?
Link is in description
How can I connect buzzer in this circuit along with GSM Module?
And what will be the code for it?
Sir please help me as I'm also doing this same project.
yes , sir
Please
How to connect our sim to it
Even I want bro.
Insert the sim, the same way you insert in phone. There is a sim slot on back side.
Can it detect Alcohol?
Yes
@@HowtoElectronics potentialmeter is required?
need your email urgently plzzzz....
I just decided to make my FYP BSCS on this project, after watching your this awesome video.
Need your help bro.
sir , i have attached all the hardware and uploded code but iam unable to get the led display , can u please help me
Sir,Can we use SIM808 module?
You can use. SIM808 is more better option
@@HowtoElectronics sir thanks for replying, sir can we use the same code?
@@HowtoElectronics please reply sir
You can try
@@HowtoElectronics Thank you sir..it really worked..😄😍