88-98 Chevy / GMC OBS Truck - LS Swap
ฝัง
- เผยแพร่เมื่อ 26 เม.ย. 2020
- We walk you through the 5.3 LS install into Travis' '99 Tahoe. This video will explain what parts we used (LIST BELOW), the main steps we took and the outcome. It is almost like these trucks were made specifically to LS swap as it is fairly easy to do and fit well.
LS Mounts:
azproperformance.com/products...
Headers:
azproperformance.com/products...
Oil Pan:
azproperformance.com/products...
Engine Harness:
azproperformance.com/collecti...
Radiator:
azproperformance.com/collecti... - ยานยนต์และพาหนะ
Turn up the music, I can still almost make out what your saying
Hahaha
lol
I Didn’t even notice until TH-cam shoved this dumb comment in my face
Aww poor thing,""
Hilarious 😄
This is one of the cleanest OEM esque swaps I've seen done. Great job
Excellently done. Very clean and I wouldnt change a thing you did. You planned this very well.
Youre teaching your little ones by being an example what a lot of guys dont do anymore. Thats awesome 👍.
Super clean install and very detailed. Thanks for the upload and time spent filming. Have a worked up 04 tahoe and a 97 stepside that seem to be a perfect flip, and im super excited to get it underway.
SOUNDS AWESOME WITH JUST THE HEADERS ON IT. I FREAKED OUT WHEN I HEARD THE 1ST CRANK UP. AWESOME WORK!!
30:30 for anyone curious
@@mickeyslim freakin life saver
Very detailed, lots of helpful info. Motivation to finish my 96 2door!
I'm thinking about doing a swap on my 99 2 door. How did yours turn out? or if you haven't done it yet, good luck.
The wiring part is the hardest part, I will be afraid to attempt it. For a guy like me an old small block will have to suffice, but you never know. Great video.
Wow that was incredible and sounds good. Hope you enjoy your LS beast.
Great looking swap, I'll be using you guys for any parts I may need when I do mine....someday.
Also the schoenfeld long tubes designed for these trucks fit perfect and don’t hang down below the frame rail. Clears perfect on my bagged ls swapped 89
Gonna definitely be calling you guys in about 2 to 3 months. I've got a 90 obs c1500 . Putting in a 6.0 ls with 20,000 miles on it. So definitely gonna call you guys or maybe even drive from Cali to see you. Thanks for the video. Tons of help!!!
This is such a great video with clear and SIMPLE explanations. Great job.
A walk around with the truck running would be sweet 🔥 great video
So clean🔥🔥🔥 this is probably the best LS video on TH-cam
👍👍👍I'm swapping a 5.3 ls into a 67c10 great video
Nice job, thanks for sharing the fun
This is badass! looks awesome and keep up the good work.
Thanks I got my LS ready to install, might be calling on you , awesome video
Great job you made it look easy
Everything you do is nice and clean work, jealous .
Super cool you got your boys in there with there trucks watching. Thats how i learned. Them boys are gonna be smart! Keep up the good work.
Love this video i like how detailed you show everything.iam getting ready to drop in my lq4 into my 62 impala resto mod build.great job thanks for the video.
That is a sweet clean set up.hope to do mine in the future.
Awesome job,very clean👍
great job
you guys are so lucky over the pond
parts are cheap and so readily available
keep up the good work
english guy with a 305 sbc in a c1500
Nicely Done Travis..
Super clean work!! Thanks for the inspiration
That's one of the cleanest swaps I have saw in a long time
You better love those barn doors!
god I wish my truck was that clean.
She looks amazing 👌
Super clean install!
Nice and clean! When my interior color swap is done I plan to do the same to my 92 c1500. Ill keep your parts list handy!
I’ve got a 91 C1500 that’s still got the original 350 EFI that’s got over 338,000 on it. I’ve gotta do some front end work and finish cleaning up the exterior, I’m gonna get a paint job done and think about doing a swap.
Great install overview video!!!
WOW what a concept.?! Truck pan in truck
Beautiful!...clean and fast!...4 months aint bad its gonna take me a couple of years to get my 82 gbody completed but I'm in no rush I want it clean just like this jnstall...great job!
How's that Gbody coming along? I've had a few Montes and Cuttys over the years. Sold my 78 Cutlass last year and have regretted it ever since.
nice i've been wanting to turbo ls swap my 95. glad to see someone else in phx do it
That color would look damn sweet on that just satin in low gloss - that color is perfect for that ride
very clean build! nice job!
Awesome video. I own a 97 Suburban 2wd with a Dually conversion. I also have 03 LQ4 Denali for a doner. This vid builds my confidence to do it.
Post some videos of that suburban I’m interested lol
Nice & clean install.
You do the sway right. You're talking about the swap not about where to go for dinner. Great job, Great presentation.
Dude that looks really clean. Aside from the intake everything looks stock.
I watched lots of videos and this is the most cleanest swap never seen before you guys inspired me after lots of mistakes i did trying to fix my big block on my 74 c10 stepside and finally gave up last year and now im been preparing for my swap i bought a 5.3 and 4l60 transmission samething i will put a dakota digital and coilovers suspension i think i can do it
Hey bro have you swapped your C10 yet?
Looks damn sharp 👌 nice job!
Top tip: I always listen to the exhaust from the front.
awesome video guys. this is exactly what i was looking for. i got a 2000 3500 and i wanna get rid of the old 5.7 for a 6.0 so i stay 4l80
Looks incredible. Did a 2wd 94 Chevy SSB PU LS3 Erod swap here in CA 2 years ago for a customer. It's a hell of a sleeper. Liked that LS3 so much, I put one in my FJ62 Landcruiser.
Hello clifford,how much this swap cost here in CA?
i am thinking to swap mine.have 1997 2 door tahoe lt
@@shiven420 at least 15 if a shop does it especially Cali prices. We get junkyard Ls dirt cheap here on the east coast 5-10 doing it here yourself. I have a 95 2d 4wd loaded with leather I want 2 put a 6.0L lq4 or 9. I just don't have anywhere to do it?😒
Very nice work , looks better than factory 👍 I could use a ls swap wiring harness for my s10.
Thanks I'm looking at doing two of these swaps in near future, this will help!
Not editing out the kiddos was awesome! Great Dad skills.
Awesome awesome awesome video finally a video that shows a lot of good information thanks
I'm saving this video very helpful bro thanks
C10 suburban in front driveway is epic !!
God job amigo 👍
I had a trans plug similar to, that. I popped the u joint out of the driveshaft & the yoke & I just used the yoke verses cutting a good drive shaft.
It looks better than oem! Great job !
And when I did my harness I wired it into the factory fuses but I steal a good job nice truck
Damn !!!! very nice clean swap.
Awesome. Great job. Need to Ls swap my obs hopefully soon.
I'll be hopefully doing this soon. In Scottsdale here!
Excellent swap video! Thanks.
I have a 94' 1500 silverado , with donor 06' yukon 5.3 with 4l60e this is great thank you for info. 🙂👍
great work .....looks awesome
Those wheels are sick
amazing job super clean..
Great Work I Salute Clean Work💯💯💪🏾
4 Months is good! I work all week so I'm only able to do shit on the weekends. I estimated 8 months it'll take to me pull an LQ4 from an 02 denali and rebuild motor,trans, and transfer case.
Que Chulada tu Camioneta.
Felicidades!!!
Thank you for content now I know what direction I’m going with my 2000 Cadillac Escalade
What can I say can't agree more with the other guy's comments. Looks clean, sounds awesome. I would have loved to do that to my 99 Chevy but I'm letting it go. Those plans went down hill. Now I'll be driving a 08 Toyota Tundra. But great job on that LS swap bro.
Great video! I’m starting on a 98 a this week !
Wow a LS ENGINE how creative!!!
Awesome video doing the same in my two door in phoenix
Also in Phoenix but mines not running 100%
Great video! Short process video but very informative!!
Great freaking video man very well self explained
This video is a big help
Bad ass video great job down the street in Tucson Az .. be talking soon 👍
Awesome job!
Clean work 👌
Bro on point with the video!!! Im doing a 6.0 on my 91 obs ...your saving me a headache
Pretty basic swap I did a 95 2dr
@@tahoeboy5299 which motor mount or plates did you use?
@@tahoeboy5299 what did you do about the ECU? Stand-alone?
Been considering this for my 95 two door tahoe
SamYouPlays you won’t regret it
Did it so perfect looks factory great job man
I agree, I wish mine looked that good!
Great video man appreciate all the info getting ready to swap my 95 k1500
Is it done yet?
Awesome video 👍
Very nice job!
I would pay for some one to do this to my 94 2DR if I only knew a good mechanic like this pro. Amazing job
I’m doing mine right now 350 to a 6.0 ls awd
@@hbmdre Are you running 4l80e
Great job buddy!!
Beautiful job man! Well since you guys are going to be doing more vids on other trucks, i'll volunteer my 97 OBS to you guys for a video & project content :)
😂😂😂😂
th-cam.com/video/uVdIu4ZLHPQ/w-d-xo.html
If your doner has anywhere near 100k+ I'd go ahead and do rear main as well while it's out. Timing cover seal and etc usually don't go bad as soon but they're easier to change in the vehicle than the rear main obviously.
Great video man, thanks!
Good work man I’ve been doing most of my work on my obs since I been seeing the things I been wanting to do for my obs save me lots of money
Thanks really needed to see this
nice LOOKING TRK you got their
Clean install.
Love the video wish you went into more dept of the wiring part
This video helped a lottt
OBS GANG 2021🔥😤😤😤
Guys like you are pissing mechanics off , great job , DIY ers rock 👍
Not really lol, I’ve been a mechanic for 30 years, I don’t swing engines anymore so have at it younger guys!👍😁
@@sasquatchlives4261
I think he mean by how easy this guy makes it look. I've heard RIDICULOUS prices of ls swaps, all the way up to 6 and 7k to swap!! 😳😯🤦♂️😡😡
@@nonameisthename138
Oh ok my friend I understand, yeah that’s crazy lol.
That much end play on the old Saginaw power steering pumps is normal, new ones were like that from the start
C10 Kid!!! We miss your content bro 👊🏾