My friend, I want to thank you for the detailed videos showing the whole swap. Your videos are the most explained, and on top of that, you give us the parts list, 👏
Thanks for the 3 videos. Ls swap has been intimidating for me so I’ve been holding off doing. These videos just gave me the confidence I needed. Thanks so much.
That was very informative!! I have a 95 K1500 that im wanting to put a LS in. I will definitely have look back to these videos when i start working on it.
I'm swapping my 98 so thankfully the fuel pressures are good, but I I had to drop my tank anyways to replace all the lines with AN. Your vids have been absolutely Paramount in helping me finish this build. Thank you.
Wow, thank you so much for putting that out there your three part video on installing your LS really motivated me into making an install on my sons truck. Thank you so much.
Great vids. I am just starting a swap into my '88. I have a complete '02 tahoe that I plan on using the L59, 4L60 and the posi 3.73 disk brake rearend. I hope I can use the harness from the '02 to make things easier
Diggin the videos. Informative and to the point. Wish you had a full break down list and estimated cost of parts but I’ll figure it out. Only thing I’m going to do different is I want to keep my 4l80. Thanks!
I really ty for the parts list! Making my life so much easier this will be first time going with a LS and this is the best video i have seen! Ty so much im sure i will watch them all again lol im about 2 weeks away from getting the project going
I am in the final stages of wiring ty so much for the great videos I've watched a few times! And ur parts list was on point! I did end up doing alot more upgrades then I planned which is why I'm not done yet 2 months later lol. I also deleted neutral safety switch cause I have a 93 I have one built in the sterlering column so that worked out cause I have shifter bars vs cable. Again ty!
Happy to hear that brother! and I didn't add the air intake to the list cuz I felt like it's over priced but was the only thing I can find that fit but here you go! LS Swap Cold Air Intake - Black... www.amazon.com/dp/B0842BMTZ5?ref=ppx_pop_mob_ap_share
Thanks for actually posting a video explaining to every detail I’m a 95 baby about todo this swap in and extended cab 95 with my dad and this video is going to help us a lot but I was wondering if you could email me a parts list? What all you bought beside motor and truck and where if you could I’d really appreciate it anyways thanks for the awesome video it’s definitely the best tutorial video I’ve seen
Super informative video love it I’m going to buy a 1997 obs from my coworker he owned it since 2000 he’s the 2ed owner I told him I’ll take care of the truck I will ls swap it for the power but and reliability. I will do a stock swap 5.3 from my 2005 sierra which I’ll order a new engine for since it’s a daily
good detailed well explained video.. to be honest its not worth the drama,, the old 350,s can get 300hp easy and parts are cheaper now than ever before. i would have cleaned everything before putting it in,,, $25 worth of degreaser and a pressure wash and bobs your uncle/ or aunty these days. steve in Australia.
Great informative video! Love it. I don’t see why everyone says these 95s are hard to Ls swap… seems straight forward. Only question I have is was your truck a v8 or v6? Reason being is I’m looking to Ls swap my 95 one but it’s a v6. Not that I think much is different
Thanks brother and this one here but I recommend upgrading the fans I have now (the link is also below) cuz the ones it came with does not pull enough air here in Texas lol OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
Man, thank you so much for this. 🙏. This is the only video/s that showed how to remove the engine and transmission that i found. And the details 🤌. Subscribed 👍
Thanks brother! this is the radiator I used OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share But I ending up having to upgrade the fans to these because the ones it came with were not strong enough American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
Nice job and to the point did you have to do any cutting and all that splitting and connecting to your stock harnesses or just plug in those few plugs and grounds that you displayed in your installation videos
Bought a step side 90’s short bed and planning on doing the swap pretty soon, I’m only confused on the wiring which seems like the hardest part of the whole swap, do you have an instagram or something to answer questions? Would really help me a lot with the swap thanks again for the informative videos you’re the man!!
@sergiocisneros9929 thanks brother and I removed the fitting that came with the new LS pan and I put the one that came from my orginal LS pan for I can just continue buying the same oil filter for 2003 Tahoe
Hey bro awesome video you should give your self a pat on the back cause you did a hel of a job and explained everything perfectly!!! I am doing a swap.at the moment on a 94 wheel drive obs. I do.have 1 question for you if you might remember and you talked about it in this video right at the end but you didn't happen to say exactly what you had to do on hp tuners to make it read right.... And thats the rpm gauge. Do you happen to remember what you had to do in hp tuners to make it right by chance? Im not very good with HP but i do have it and could probably do it if you possibly remember the process you did to make it right. But if not no big deal man as i will try to figure it out. But again awesome videos bro and thanks for doing it and doing a great job!!!!
@@SUPSGARAGEim sorry brother i don't have Instagram. That really blows as i was very interested in what you did to make it work. Thanks again for hitting me back and also these was some very good videos man they are very helpful and informative!!!!
🤝You give me the confidence to do my swap in my 1996 gmc … But one question what happens with the ECU from the 5.3 engine ? I need to reprogram because they come whit the antithef sistem ?
glad to hear that brother! and I left mine plugged in cuz I didn't wanna risk the chance of something not working right but I heard u can remove it if you do do it once you know it's running and you only have to program the LS computer (remove the vats for it to run)
@delontachristian8125 Sorry brother I won't be able to answer that one I don't have the experience to tell you about bolting up a 5 speed to an LS engine
Very very good video one of the best i watched so far only thing i don't get is why you didn't use the trans plug i thought you were using the 4l60 that came in it but maybe i need to watch again
that I don't know brother because they were different years and the 95 model has a few things ONLY the 95 had, I did not wanna risk trying to find out if I needed spacers or a certain flexplate it was just alot easier to put everything my LS came with.
@SUPSGARAGE ok thank you so much probably best just to use the whole drive train then out the Tahoe then thank you so much for the response and your video was amazing especially putting the links to everything straight up game changer for anyone trying to do a ls swap
yes I do brother but I recommend upgrading the fans I have now (the link is also below) cuz the ones it came with does not pull enough air here in Texas lol OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
@mikeromero2776 yes the red one will go to your new harness that is labeled ignition (should be red also) and the white will go to your white one from your new harness as well brother
Hey! I jumped the Fuel pump at the fuse box like you showed and it works. Except now when I turn my headlights on it shuts the fuel pump off....? Any ideas?
Thanks brother! this is the radiator I used OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share But I ending up having to upgrade the fans to these because the ones it came with were not strong enough American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
I wanna say yes to keeping the orginal ECU in my case cuz I was still using some wires from it to work with my LS and I just trimmed the orginal harness, keeping only the things I needed brother and glad the video helped you 🙂👍!
@@SUPSGARAGE just so we both understand then using original ECU do we use the LS ECU? Doing all the research I can plan on starting this project for this coming winter
Well I'm kept mine in there because I did not wanna risk something not working but I heard you don't need to keep the orginal ECU connected but u do for sure need to use a LS ECU for the LS Engine
I have a nv 4500 in a 06 yukon with a 5.3 from a 2002 and i had to do all of this and more nothing is the same everything chages from 94 to 96 to 2000 to 04. Everything lights ,wipers,seats,door panels,dash ,foot pedals,back window,abs brakes , steering wheel, mirrors ,cpu ,gauges ,carpet wire harness ac condenser,heater core fuel pump ,gas gauge is backwards full is empty 😅
Thank you for your breakdown on this swap I’m currently in the process of doin one myself. I do have a question though. Do you have a email I can contact you so I can breakdown exactly what I got?
Nice build. What alternator did you upgrade to. Im currently havin same issue with fans. Volts when charging are under 13 volts. Also have a link for plug wires you are using.
@SUPSGARAGE cool thanks for link. What about plug wires. I like the way those fit that you have. I've went through couple sets. Those look like what I need.
You happen to know if the harness you used would work and plug into the factory trans on an obs of this year? Just wanna swap the engine and not the transmission.
I did not list them because I felt like it was over priced but was the only one I can find that would fit here you go brother LS Swap Cold Air Intake - Black... www.amazon.com/dp/B0842BMTZ5?ref=ppx_pop_mob_ap_share
Question 🙋🏻♂️ik is stupid but what color was the wire that u connect to the white wire for rpm and do I need to wire both ignition and rpm ? To get the tach to work thanks
yes I do brother but I recommend upgrading the fans I have now(the link is also below) cuz the ones it came with does not pull enough air here in Texas lol OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
I left mine just underneath the hood on the driver side brother Here is the radiator but I had to upgrade the fans to the link below the radiator link due to the fans it came with were not strong enough for my swap brother OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch Upgraded 180 Watt Motors 12 Volt Electric Radiator Cooling Fans Reversible Air Flow Highest Performance 5528 CFM a.co/d/07Bm2NH1
@ss454gm yea the AC lines worked great brother and I recommend upgrading the fans I have now(the link is also below) cuz the ones it came with does not pull enough air here in Texas lol OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
@@SUPSGARAGE nice think I’m going to do the swap in my 90 obs cause it needs a motor anyways and I got a guy that does a turn key package on motors. On that upgrade alternator what you get just a factory one from a Tahoe or truck with factory electric fans?
@ss454gm I say go for it brother once it's all done u won't regret it and the alternator I bought from Summit. And I believe I bought the one with the most power because the stock alternator that came with the LS could not handle all the electric stuff on my truck
with Standalone I did nothing with regarding the fuel pump brother I only messed with the stock fuse box from the truck I just needed a wire that has power when the key is on to power the relay from here on (I did not run power straight to the fuel pump, just the relay)
@Brandon_obs_ls this one here brother but make sure you know what injectors you have other wise ur gonna have to get some adapters like I did ZZCSZ LS Standalone Wiring Harness 4.8 5.3 6.0 Compatible with 1999-2006 GM Vortec Engines 4L60E with Adapter Transmissions Complete Wire Harness for Fuel Injection System DBC Engine Harness a.co/d/7StKdtu
Yes I do but I don't recommend it cause of the price but it was the only thing I found that would work lol LS Swap Cold Air Intake - Black LS1 LS2 LSX Restomod A-Body G-Body Camaro Chevelle GTO Monte Carlo Caprice a.co/d/cSfP13K
So for the fuel pump did you just run a jumper wire from Pink to the green wire? Also the wires from the original engine did you cut them off and tuck them back in the original harness?
How did you get the spedometer to work ??? You said you did not use the speedometer wire on video (1) .. but in this videos the speedometer is working ?.?.. did you end up Using the wire? If so to what wire on the obs .. tia!
I spliced the 2 speed sensor wires from my LS harness into my 2 wires from my orginal speed sensor harness to get the signal readings to go to my gauge as well does that make sense?
I used this one for the fuel lines EVIL ENERGY 6AN 3/8" PTFE LS Swap EFI Fuel Line Fitting Kit, E85 Nylon Braided Fuel Hose 25FT a.co/d/bo7N05w and this one for the transmission brother Limited-time deal: 3/8 6AN 12FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 6PCS Swivel Fuel Hose Fitting Adapter Kit - Black a.co/d/a77IoLt
@emtfire20 Glad they help you brother and I only replaced the fuel lines from the intake to the fuel filter. You can replace them to the sending unit with the same lines but I didn't see it was necessary
this harness is suppose to run through the passenger side but i didn't wanna run it that way so i just had it come back to the driver side and left it there so none of it is going inside the truck
yes I do brother but I recommend upgrading the fans I have now(the link is also below) cuz the ones it came with does not pull enough air here in Texas lol OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
@@SUPSGARAGE ok perfect thanks man! I was looking at a similar setup that’s super important for air flow for me as well down here in Florida it gets brutal hot man. Thanks again love the videos!
My friend, I want to thank you for the detailed videos showing the whole swap. Your videos are the most explained, and on top of that, you give us the parts list, 👏
Thanks brother! Glad it helps you 😊👍!
Best tutorial on the tube!!! Kudos sir!
@malandostory2317 Thanks brother 😁👍
Thanks for the 3 videos. Ls swap has been intimidating for me so I’ve been holding off doing. These videos just gave me the confidence I needed. Thanks so much.
Happy to hear that brother 😁👍!
That was very informative!! I have a 95 K1500 that im wanting to put a LS in. I will definitely have look back to these videos when i start working on it.
Thank you so much ❤ i really been debating doing a swap but I made up my mind no one really explains the steps and you did them very well
I'm swapping my 98 so thankfully the fuel pressures are good, but I I had to drop my tank anyways to replace all the lines with AN. Your vids have been absolutely Paramount in helping me finish this build. Thank you.
Glad it helped you brother and hope you project goes great!
Wow, thank you so much for putting that out there your three part video on installing your LS really motivated me into making an install on my sons truck. Thank you so much.
Thank you for the support brother 😊👍
Good stuff man. I watched and saved all three videos of the swap to my playlist for future references 🤝
thanks for the support brother 🙂👍!
Great vids. I am just starting a swap into my '88. I have a complete '02 tahoe that I plan on using the L59, 4L60 and the posi 3.73 disk brake rearend. I hope I can use the harness from the '02 to make things easier
Diggin the videos. Informative and to the point. Wish you had a full break down list and estimated cost of parts but I’ll figure it out. Only thing I’m going to do different is I want to keep my 4l80. Thanks!
I love this video I been so scared to do one and been second guessing my self but this gives me reassurance
That's what these videos are for brother! You won't know till you try 🤷♂️😊
I really ty for the parts list! Making my life so much easier this will be first time going with a LS and this is the best video i have seen! Ty so much im sure i will watch them all again lol im about 2 weeks away from getting the project going
Glad it helps you! if you start don't stop till you finish it! and you can message me on instagram if you have any questions! sups_garage
I am in the final stages of wiring ty so much for the great videos I've watched a few times! And ur parts list was on point! I did end up doing alot more upgrades then I planned which is why I'm not done yet 2 months later lol. I also deleted neutral safety switch cause I have a 93 I have one built in the sterlering column so that worked out cause I have shifter bars vs cable. Again ty!
What intake breather is that?
Happy to hear that brother! and I didn't add the air intake to the list cuz I felt like it's over priced but was the only thing I can find that fit but here you go!
LS Swap Cold Air Intake - Black... www.amazon.com/dp/B0842BMTZ5?ref=ppx_pop_mob_ap_share
@SUPSGARAGE 249 little on high side but looks clean on the install so def ok with paying that! Ty again.
Thank you for explaining step by step you are going to save me a lot of money when I do my swap
Happy to hear that brother! and thanks for the support!
Bro these breakdown videos are gold . Thank you !
Glad it helps you brother 😊👍
Thanks for responding so quickly! I replaced the entire unit. That could be the problem.😅
@@greggalindo6714 np brother 😊👍
Thanks for actually posting a video explaining to every detail I’m a 95 baby about todo this swap in and extended cab 95 with my dad and this video is going to help us a lot but I was wondering if you could email me a parts list? What all you bought beside motor and truck and where if you could I’d really appreciate it anyways thanks for the awesome video it’s definitely the best tutorial video I’ve seen
@trentonmccormick3891 thanks brother anyway you can message me on instagram? sups_garage
Thanks, I'm getting plans together for a OBS swap . These videos helped a lot
Glad they help you brother and good luck on your project!
7:06 also where did new purple and green wire come from?
the purple and green wire are from the LS harness. It's the connection that goes to the speed sensor brother
Thank you for sharing all your knowledge I really appreciate it I have a 1990 that I want to swap with my son
Glad it helps u brother! hope ur project goes well!
Super informative video love it
I’m going to buy a 1997 obs from my coworker he owned it since 2000 he’s the 2ed owner I told him I’ll take care of the truck I will ls swap it for the power but and reliability. I will do a stock swap 5.3 from my 2005 sierra which I’ll order a new engine for since it’s a daily
Great Video
I’m going back to watch some of your other videos.
thanks for that brother!
great video!
Bro thank you so much for all your help and sharing your knowledge this simplifies everything thank you
Glad it helps brother!
good detailed well explained video.. to be honest its not worth the drama,, the old 350,s can get 300hp easy and parts are cheaper now than ever before.
i would have cleaned everything before putting it in,,, $25 worth of degreaser and a pressure wash and bobs your uncle/ or aunty these days. steve in Australia.
Sounds great with the headers! Also thank you much for all the details!
Thanks brother! hope the video helps you!
Great informative video! Love it. I don’t see why everyone says these 95s are hard to Ls swap… seems straight forward. Only question I have is was your truck a v8 or v6? Reason being is I’m looking to Ls swap my 95 one but it’s a v6. Not that I think much is different
thanks brother! Mine was a V8 but for urs, you just need to replace your V6 clam shells to V8 clam shells (the motor mounts) and you should be good
Swapping my 95 this summer bro 🫡🫡
message on Instagram if you got questions brother 😊👍 sups_garage
Great video. It is helping me a lot with my ls swap. 🤙🏻 which radiator are you using?
Thanks brother and this one here but I recommend upgrading the fans I have now (the link is also below) cuz the ones it came with does not pull enough air here in Texas lol
OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share
American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
Man, thank you so much for this. 🙏. This is the only video/s that showed how to remove the engine and transmission that i found. And the details 🤌. Subscribed 👍
Glad it helped you brother! and thanks for the support 😁👍!
@@SUPSGARAGE anytime 🤝
This is awesome! Thanks so much!
Did you have to do anything to get your fuel gauge to work? Mine doesn't seem to be working.
@danbuildz2054 Glad it helped you brother 😁👍! and yes my fuel gauge works u made sure all ur grounds from your original harness are still connected?
I plan on doing a 6.0 or 6.2 LS swap on my 96 Cheyenne but I'm lucky it's a 5 speed so there's not as much electronics
Very sophisticated approach..💯
Very detailed video, Thank you! Can you drop a link for the radiator and electric fans you used?
Thanks brother! this is the radiator I used
OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share
But I ending up having to upgrade the fans to these because the ones it came with were not strong enough
American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
I appreciate this video you saved me $1500 on engine harness was about to order bp automotive harness not sure the difference between Amazon and bp
Glad it helped you brother 😊👍!
Nice job and to the point did you have to do any cutting and all that splitting and connecting to your stock harnesses or just plug in those few plugs and grounds that you displayed in your installation videos
Thanks brother! and it's both cutting into the wires to splice into the orginal harness making sure the grounds were connected
Great vid man much help provided and details
thanks brother 😊👍
Bought a step side 90’s short bed and planning on doing the swap pretty soon, I’m only confused on the wiring which seems like the hardest part of the whole swap, do you have an instagram or something to answer questions? Would really help me a lot with the swap thanks again for the informative videos you’re the man!!
Of course I do brother look up sups_garage on Instagram 😊👍
Aye bro what size filter did you use with the new oil pan thanks for your videos my ls swap is almost done
@sergiocisneros9929 thanks brother and I removed the fitting that came with the new LS pan and I put the one that came from my orginal LS pan for I can just continue buying the same oil filter for 2003 Tahoe
Hey bro awesome video you should give your self a pat on the back cause you did a hel of a job and explained everything perfectly!!! I am doing a swap.at the moment on a 94 wheel drive obs. I do.have 1 question for you if you might remember and you talked about it in this video right at the end but you didn't happen to say exactly what you had to do on hp tuners to make it read right.... And thats the rpm gauge. Do you happen to remember what you had to do in hp tuners to make it right by chance? Im not very good with HP but i do have it and could probably do it if you possibly remember the process you did to make it right. But if not no big deal man as i will try to figure it out. But again awesome videos bro and thanks for doing it and doing a great job!!!!
thanks brother and yes I can help you can you message me on Instagram? sups_garage
@@SUPSGARAGEim sorry brother i don't have Instagram. That really blows as i was very interested in what you did to make it work. Thanks again for hitting me back and also these was some very good videos man they are very helpful and informative!!!!
Man great video it deserves millions of likes and views !
Thanks for the support 😊👍!
🤝You give me the confidence to do my swap in my 1996 gmc … But one question what happens with the ECU from the 5.3 engine ? I need to reprogram because they come whit the antithef sistem ?
glad to hear that brother! and I left mine plugged in cuz I didn't wanna risk the chance of something not working right but I heard u can remove it if you do do it once you know it's running and you only have to program the LS computer (remove the vats for it to run)
Great information, very thorough
Thanks brother!
Hey man where did you get that radiator bracket @17:09? Looking for something like that.
it came with the truck brother and its been on there since the 90's so I wouldn't know where to get it from lol
I’ve got a 95 obs 5speed, my ? Is would I use my flywheel? Great videos
@delontachristian8125 Sorry brother I won't be able to answer that one I don't have the experience to tell you about bolting up a 5 speed to an LS engine
You’ll have to get flexplate with an adapter that come with it
Very very good video one of the best i watched so far only thing i don't get is why you didn't use the trans plug i thought you were using the 4l60 that came in it but maybe i need to watch again
Thanks brother and I used the 4l60 that came with the LS motor not my orginal one. That's why I didn't use the plug.
@@SUPSGARAGE is it ok to use the original 4l60 as that's what's in my truck
that I don't know brother because they were different years and the 95 model has a few things ONLY the 95 had, I did not wanna risk trying to find out if I needed spacers or a certain flexplate it was just alot easier to put everything my LS came with.
@SUPSGARAGE ok thank you so much probably best just to use the whole drive train then out the Tahoe then thank you so much for the response and your video was amazing especially putting the links to everything straight up game changer for anyone trying to do a ls swap
thanks brother I'm here to help 😊👍!
He'll yeah!
Great job. Subscribed 👍🏻
Thanks for the support brother!
Very nice information. What radiator did you use
yes I do brother but I recommend upgrading the fans I have now (the link is also below) cuz the ones it came with does not pull enough air here in Texas lol
OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share
American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
Thank you
Np brother 🙂👍
Great video 👍🏾
Hi there about the two wire off the coil do I connect those two with the one off my new harness together
do you mean the red and the white wire that went to the original coil on the TBI engine?
Yes
@mikeromero2776 yes the red one will go to your new harness that is labeled ignition (should be red also) and the white will go to your white one from your new harness as well brother
Ok sounds good thank you for the info.
Hey!
I jumped the Fuel pump at the fuse box like you showed and it works. Except now when I turn my headlights on it shuts the fuel pump off....? Any ideas?
@danbuildz2054 can you message me on instagram brother? sups_garage
Thank you
Can I buy a parts list from you
u need more then what's on the description brother?
@@SUPSGARAGE thank u silly me didn’t read nor pay attention
@richdogs8615 all good brother 🙂👍
Good afternoon man. Do you remember if you connected the white(86)or black(85) wire from the fan(s) relay to the green stand alone wire ?
85 is the one I connected to the green wire that comes from the LS harness brother
@@SUPSGARAGE thank you man.
This is so easy!!
Do these headers work for a 2012 5.3l ls using them on a 1997 obs k1500?
I'm doing a ls swap to my 98 Chevy Shorty. I'm stuck on how to get my fuel gauge to work. And need some help on that
Was it working before the swap brother?
Whats the part number for radiator with the fans? Thanks awesome video
Thanks brother! this is the radiator I used
OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share
But I ending up having to upgrade the fans to these because the ones it came with were not strong enough
American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
@@SUPSGARAGE thanks man!!!!!
Do you have the part# for the oil filter lol. Thanks
@marcogutierrez7916 i do not brother but it's an oil filter from an 03 tahoe
Any video on wiring harness? Out of lume?
u mean the factory one brother?
Aye bro what’s the transmission mount part ##
@@sergiocisneros9929 Here you go brother you can find it at Oreilly's Part # 3.1108G
So stupid question… you need your stock harness and computer…? I’m doing the swap rn and your videos helped me a ton!!!
I wanna say yes to keeping the orginal ECU in my case cuz I was still using some wires from it to work with my LS and I just trimmed the orginal harness, keeping only the things I needed brother and glad the video helped you 🙂👍!
@@SUPSGARAGE just so we both understand then using original ECU do we use the LS ECU? Doing all the research I can plan on starting this project for this coming winter
Well I'm kept mine in there because I did not wanna risk something not working but I heard you don't need to keep the orginal ECU connected but u do for sure need to use a LS ECU for the LS Engine
@@SUPSGARAGE much love thank you and great videos for the swap keep up those good quality videos!
God gone bless you for helping his lost children lol
🤣🤣🤣 that's the first hearing that one brother!
I am almost done do you know what wires I need to keep out of fatory harness
@richdogs8615 other then the ones i showed on this video no brother because I didn't wanna risk messing something else up
@@SUPSGARAGEok I like to send some pictures when done so you can show one of your students with success from you videos
I have a nv 4500 in a 06 yukon with a 5.3 from a 2002 and i had to do all of this and more nothing is the same everything chages from 94 to 96 to 2000 to 04. Everything lights ,wipers,seats,door panels,dash ,foot pedals,back window,abs brakes , steering wheel, mirrors ,cpu ,gauges ,carpet wire harness ac condenser,heater core fuel pump ,gas gauge is backwards full is empty 😅
Hey buddy is fuel pump MPE16008 still holding up for you ?
Yes sir!
Did you had to rig some things for that radiator to fit? Thanks
No the radiator fit just fine brother
Thank you for your breakdown on this swap I’m currently in the process of doin one myself. I do have a question though. Do you have a email I can contact you so I can breakdown exactly what I got?
Do you have Instagram or Facebook brother?
Nice build. What alternator did you upgrade to. Im currently havin same issue with fans. Volts when charging are under 13 volts. Also have a link for plug wires you are using.
Thanks brother and this one was the one I used
Check out this page from Summit Racing www.summitracing.com/parts/pwm-48237
@SUPSGARAGE cool thanks for link. What about plug wires. I like the way those fit that you have. I've went through couple sets. Those look like what I need.
@gthomas5880 they came as an option to go with the headers I bought from speeding engineering
Great video. Should have pulled the bed off it for the fuel pump.
You happen to know if the harness you used would work and plug into the factory trans on an obs of this year? Just wanna swap the engine and not the transmission.
I wanna say yes but just don't know if the pin out is the same brother
@@SUPSGARAGE I guess I’ll find out when I get there may have to splice in my own connectors.
Que ecu usaste ermano tiene k ser la del conector azul y rojo oh puede ser verde y azul?
Usé el rojo y el ble porque para mí era más fácil.
What about the cold air intake? What part is that from Amazon? You did not say.
I did not list them because I felt like it was over priced but was the only one I can find that would fit here you go brother
LS Swap Cold Air Intake - Black... www.amazon.com/dp/B0842BMTZ5?ref=ppx_pop_mob_ap_share
I am putting a ls3 in a 4x4 tahoe and can't find exhaust manifolds that fit do you know what works
Thanks
sorry brother I have not done one like that yet to know 😔
Where did you find the adapter for the steam port off the radiator
at Oreallys brother
Question 🙋🏻♂️ik is stupid but what color was the wire that u connect to the white wire for rpm and do I need to wire both ignition and rpm ? To get the tach to work thanks
Figured it out lol
Sorry brother I missed this comment from you 😔 but I'm glad you figured it out 😊👍
How about 88-89 moonies gauges? Will they work on ls swaps
that I don't know since my truck did have them
My truck is an 88! It all will work the same as long as you got adapters with the correct sensors
@@jarianbrass5021 @ speedometer works? With stck moonie gauge?
hey bud how did you get your factory fuel gauge to work
kept my factory computer in and just kept all the grounds brother nothing special I had to do
For the fuel pump do you mean from a 1996 model Silverado
Yes that is correct
U have the link for the radiator and fan ?
yes I do brother but I recommend upgrading the fans I have now(the link is also below) cuz the ones it came with does not pull enough air here in Texas lol
OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share
American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
Can u use the stock radiator ?
@@jorgegudino9153 I don't see why you couldn't so I'm sure u can
@SUPSGARAGE would it be similar to a 93 obs?
yes similar but u might have to find out where ur wires on ur truck are will not be hard and ur shift cable might be different
did you use the 1995 4L60E trasmission with the LS motor ? ?
no I used the one that came with the LS engine brother
What did you do with the unused wires from the original wire harness?
@jasonkellyfixico70 I cut them off brother but only do that once it's running and everything works!
Can you tell me which radiator did you use, and did you go through the firewall with your harness
I left mine just underneath the hood on the driver side brother
Here is the radiator but I had to upgrade the fans to the link below the radiator link due to the fans it came with were not strong enough for my swap brother
OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share
American Volt Dual 12-13 Inch Upgraded 180 Watt Motors 12 Volt Electric Radiator Cooling Fans Reversible Air Flow Highest Performance 5528 CFM a.co/d/07Bm2NH1
Thanks for the help
@shodawg7580 no problem brother
Just to let yall know the 4.3 spider 🕷️ fuel injected motor when u ls swap its fuel pump if new should work on your ls mines a 98 short bed
Which radiator did you go with? And did those a/c lines work good to rehook up the air?
@ss454gm yea the AC lines worked great brother and I recommend upgrading the fans I have now(the link is also below) cuz the ones it came with does not pull enough air here in Texas lol
OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share
American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
@@SUPSGARAGE nice think I’m going to do the swap in my 90 obs cause it needs a motor anyways and I got a guy that does a turn key package on motors. On that upgrade alternator what you get just a factory one from a Tahoe or truck with factory electric fans?
@ss454gm I say go for it brother once it's all done u won't regret it and the alternator I bought from Summit. And I believe I bought the one with the most power because the stock alternator that came with the LS could not handle all the electric stuff on my truck
What kit for the fuel sistem did u use
This one here brother
EVIL ENERGY 6AN 3/8" PTFE LS Swap EFI Fuel Line Fitting Kit, E85 Nylon Braided Fuel Hose 25FT a.co/d/cM8wb4v
Hey there, about the fuel pump wire off the stand alone harness which pin on the fuel relay off the fuse block did you tap in to after all
with Standalone I did nothing with regarding the fuel pump brother I only messed with the stock fuse box from the truck I just needed a wire that has power when the key is on to power the relay from here on (I did not run power straight to the fuel pump, just the relay)
Sounds good brother I appreciate your good information
@@SUPSGARAGEwhat harnesses did u buy
@Brandon_obs_ls this one here brother but make sure you know what injectors you have other wise ur gonna have to get some adapters like I did
ZZCSZ LS Standalone Wiring Harness 4.8 5.3 6.0 Compatible with 1999-2006 GM Vortec Engines 4L60E with Adapter Transmissions Complete Wire Harness for Fuel Injection System DBC Engine Harness a.co/d/7StKdtu
@@SUPSGARAGE thx for the information ima sub
Do you have a part number for the fuel filter and fuel pump ?
Here you go brother filter is 33481 and fuel pump is MPE16008
Thank you
How did you make the voltage gauge to work ?
I didn't have to do anything to make that work just make sure all ur grounds are connected and it should work brother
I having problem with my swap. My abs anti lock is on. Idk how to fix that problem
lol mine has always been on even before my swap I just took the bulb out 🤣
You have a part number to the cold air intake set up
Yes I do but I don't recommend it cause of the price but it was the only thing I found that would work lol
LS Swap Cold Air Intake - Black LS1 LS2 LSX Restomod A-Body G-Body Camaro Chevelle GTO Monte Carlo Caprice a.co/d/cSfP13K
So for the fuel pump did you just run a jumper wire from Pink to the green wire? Also the wires from the original engine did you cut them off and tuck them back in the original harness?
yes to both of your questions brother
Sweet thank you getting this 6.0 ready to go in! It's dbw do you think there's anything really different?
@my95chevy95 I would think it's just gonna b the election pedal n also if your fuel lines are returnless but that should be about it brother
Ok cool thanks again saving my life over here lol good work my friend!!!
@my95chevy95 No problem brother 😊👍
How did you get the spedometer to work ??? You said you did not use the speedometer wire on video (1) .. but in this videos the speedometer is working ?.?.. did you end up
Using the wire? If so to what wire on the obs .. tia!
I spliced the 2 speed sensor wires from my LS harness into my 2 wires from my orginal speed sensor harness to get the signal readings to go to my gauge as well does that make sense?
7:04 thats what you talking about?..
@@jamesmendoza7980 yes sir
What transmission crossmeber r did you use?
the original one that was already on my truck brother
My fuel gauge goes past the full line when full and goes to 1/4 tank when empty. Have you ever seen this issue before?
@greggalindo6714 if you messed with the fuel pump it's possible you bent the floater brother
Part 2 por favor
th-cam.com/video/yd_q_F3iUNY/w-d-xo.htmlsi=KvOwlg11gcZUM6wa
Confused on your parts list which fuel lines and which transmission lines did you use ?
I used this one for the fuel lines
EVIL ENERGY 6AN 3/8" PTFE LS Swap EFI Fuel Line Fitting Kit, E85 Nylon Braided Fuel Hose 25FT a.co/d/bo7N05w
and this one for the transmission brother
Limited-time deal: 3/8 6AN 12FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 6PCS Swivel Fuel Hose Fitting Adapter Kit - Black a.co/d/a77IoLt
Sweet thanks man your videos definitely help. What about off the fuel sending unit did you replace the rubber hoses with these or leave them ?
@emtfire20 Glad they help you brother and I only replaced the fuel lines from the intake to the fuel filter. You can replace them to the sending unit with the same lines but I didn't see it was necessary
One more question I’m running an aftermarket intake with 102mm throttle. Do I need a fuel pressure regulator? And do you know how the fuel rail is ran
@emtfire20 I can't say brother cuz I never done that
Where did you run your wiring harness
this harness is suppose to run through the passenger side but i didn't wanna run it that way so i just had it come back to the driver side and left it there so none of it is going inside the truck
Thanks for that
How did u hook up the power line from the injection for fan
I used it to power up my fan relay brother when the key is on.
Ok so u hook it up to what wire on the relay
@@tremainethomas9112 message me on Instagram brother it will be easier sups_garage
What radiator is it that you are running looking to use the same one
yes I do brother but I recommend upgrading the fans I have now(the link is also below) cuz the ones it came with does not pull enough air here in Texas lol
OzCoolingParts 3 Row Core... www.amazon.com/dp/B07Q26NXRH?ref=ppx_pop_mob_ap_share
American Volt Dual 12-13 Inch... www.amazon.com/dp/B0BT25TKGB?ref=ppx_pop_mob_ap_share
@@SUPSGARAGE ok perfect thanks man! I was looking at a similar setup that’s super important for air flow for me as well down here in Florida it gets brutal hot man. Thanks again love the videos!
No problem brother 🙂👍
Nice 👍