UPDATED GUIDE TO FORWARD PROGRAMING, RATES, EXPO AND HOW TO DO IT ALL!
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Well you installed a new AR630 or a AR631 but how do you set up SAFE and AS3X? How does Forward Programing work? In this video I explain in simple terms how to set up SAFE and AS3X using Forward Programing with my Spektrum NX10. Also what is expo and travels, Timers? What is it all?
I run through the basics of setting up a profile in your new transmitter, why you use throttle cut! and many other things to get a new pilot ready to take to the skies with a great plane like the Arrows RC Trekker!! I am sure I left some stuff out but leave a helpful CONSTRUCTIVE comment so that we ALL can benefit!
Thanks for watching and staying up to date with Fat Guy Flies RC!
You do that by hitting that thumbs up button and subscribing to my channel! Also hit that little bell and you will be notified every time I upload a video!
God bless!!
This is intended to be a better updated video showing a NEW pilot what to do with this new planes he or she has and how to get it going with a NEW Spektrum RX system. From making a throttle cut to performing forward programing!
Well what can I say. I today followed this video, successfully added an AR630 to Bigfoot. Only one thing - How to add the Panic button to this setup. Thanks this worked a treat.
No need just fly in SAFE and release the stcks and that is the same. Now you program the three levels and pick a panis button but I have not done that yet so I cannot advise.
Thank You! I think I can get the Expo concept more clearly now. Your explanations are very helpful👍
Glad to help!!
Where was this 2-3 years ago when I started. Good job 😎👍
Well I am here now and I hope it helps!
Fantastic video! The video that always should have been made! Thank you!
You're very welcome!
Do you first do a maiden flight and then setup SAFE/AS3X or can you install it right of the bat before the maiden flight?
Fist before I ever go to the field. You know how I said I use a three position switch and how I have a 3rd FM. Well I use that FM to turn the gyro completely off to see just how trim the plane actually is in flight. Not something I want a new pilot to do but great when your setting a more advanced plane up.
Thank you for a very informative video. You teach as if you want us to learn instead of some of the fast talking smarties that are only trying to impress you on how much they know instead of trying to teach us beginners. Then when you try to contact them, well I'm amazed that how many companies have an employee named CHAT...who will never be an employee of the month. Thanks again and I'm ready to go apply what you have explained VERY WELL. Love to watch your videos.......HAPPY FLYING!
I appreciate that! I am completely self taught so I try to explain from that perspectives.
Thank you for taking the mystery out of forward programming. The rc hobby owes you a debt of gratitude. Have a blessed day my friend.
Thank you always glad to help!!!!
Hi there, Great Guy, you have the best channel:-), and I like your style!
Your instructions are easy to follow, and I use your videos as tutorials step-by-step when programming.
I have a problem, that perhaps you can solve/explain to me:
I have a NX10 radio and an unused AR8360T receiver that I bought about 2 years ago. I am now planning to use this in an AeroScout 1.1 Trainer (in which stock RX is the AR631 that is factory pre-programmed with AS3X and Safe), and I have used the new unit to include the Flaperons function (which needs one xtra channel).
I changed the Y Aileron harness with two single leads, one to pos 2 = RAR and the other pos 6 -=LAR (AX1). Pos 4 is RUD as usual, and pos 5 is now GY1 (gear). Pos 7 = AX2, but I dont know what I control there. When I operate the Flight Modes, AX2 shifts from -100 to zero to 100.
Now, it should be possible to fly the model, because all rudders go in the right direction, but I am unable to execute the Forward Programming function.
The Other Programming function: I try to execute 'Factory Reset', but it will not execute the command.
Somehow, the system is out of whack. It is possible that I have chosen wrong locations (pins) for the functions AS3X and SAFE, and that is why the RX wont budge.
Best regards,
Rolv (Norway)
Go back and plug 1 aileron into the flap pos or channel 6 and the other one in the aileron pos and set the wing type to flaperon. Then it should work. Also the receiver must be jAILbroken to have the factory reset option available I will be doing a video on how VERY soon.
Thanks from Australia Mr Fat Guy
Most welcome!!
I agree with the previous post, much better explained than the Spektrum videos. Even though I knew all this, learnt from hours of playing around with the NX8. It was still great to watch and see someone show new comers how to set it up from start to finish. I had never heard of forward programming. Had not a clue what it did and how to apply it to a model. If I could have seen this vid it would have save me from brain fade lots of times. 🤣🤣🤣🤣🤣🤣
Cool, thanks! I appreciate that!
I think Spektrum owes you a ton of money for explaining these concepts in simple terms much better than Specktrum's in house produced videos, thanks. I'm moving more into balsa planes and this is an excellent video on setting up a plane properly. Thanks.
Thanks so much and the principles are the same in balsa planes with these receivers.
Dear Fine Guy, I am in awe. You have provided me with the pieces I needed to have fun and not frustration. You are a fantatic teacher and an absolute asset to me as a new flier.
Kudos kudos kudoos.
I do have one perhaps silly question. When I change my receiver over to the 630 or thhe 631 on an fms plane with reflex, do I take out both the reflex and the receiver or do I leave reflex in. My thoughts are to take out both and just go with the Spek 630 or 631
Thank you so very much for giving me a clear and concise explanation to now enjoy my hobby ro its ma.
Your student from Canada 🇨🇦
Bob
Watch for my soon to come out video going over that exact issue and other issues like that.
One of the best, if not the best, tutorial on the covered subjects.
I think I would have mentioned/added how the third position on the modes and rate switches might be used - e.g. Mode position 3 = no SAFE and no AS3X; 3 position Rate switch = Low, Medium and High.
Thanks, cool I do FM 1 SAFE, FM2 AS3x, FM 3 no gyro
Hey there friend
Just wanted to say thanks for the video tutorial on setting up a new receiver, as3x , expo and such on your arrows trekker
As I’m new to the hobby it can be a bit overwhelming to figure out how to do some of the technical stuff.
Love your videos, keep up the good work. 👍🏻
Glad I could help. Question did you donate money to my channel with a superthanks?? If so thank you.
Great video on setting up the plane and AS3X/Safe. Simple and straight forward.
Thank you so much!!
hello, you are excellent !!! i know the subjects you explained and was curious to see you explaining them. Congratulations !! Nice instructor
Glad you like them!
I was about ready to throw this transmitter against a tree till I ran across your video. Thanks for speaking in terms that a newbie can understand.
Glad to help.
I have a question.
Big man, first of all, Aloha, my question is, can you explain? Why my radio says holds one or even holds 2 mainly when I get PNP airplane thank you Bradda?p.s. I have a ix20se radio.
Hello! The holds refers to any time you lose signal mutiple times. reposition the receiver and that may help. watch this: th-cam.com/video/nZlHA2FEY20/w-d-xo.html
@FatGuyFliesRC Thank you, thank you. Thank you. You're a big help Aloha.
very good video easier to follow than the spektrum's video great job one thing , I like to set flight mode 1 to inh for everything which turns the AS3X off this is just in case the receiver comes loose in the aircraft then use flight mode 2 and 3 for AS3X
Yes that is why I choose a 3 position switch to do just that.
I was trying to set up as3x step by step using your previous video. Switch B for flight mode seems ineffective, staying on FM2 no matter where the switch was. I did stumble across the as3x gains being controlled by the Rknob. I suspect there is some way to capture gains, but the switch not changing the flight mode is aggravating. There seems to be automatic call outs when I moved switch B calling out FM 1, FM2 etc. but the screen stays on FM2 the entire time. IDK. When I figure it out I'll post the solution in case someone else is having the same issue. Thanks for updating the forward programming procedure.
Go back and reset the model and only setup a basic model profile DO NOT pick a flight mode. wait until your into forward programing to do so. The first time FP asks you about it then set it up on 3 pos switch.
@@FatGuyFliesRC turned out channel 7 was inhibited somehow. Don't know how that happened. But that's where the AS3X was. Weird. Anyway once we made it active everything started working fine. Plane really flies better now. And it flew pretty good before.
Well I am just glad you got it sorted out!!! Keep em flying!!
After watching many hours of videos trying to set up SafeX and gyro system I thank you for such a clear video that I could understand and get set up correctly. Thanks so much.
Glad to be a service. I am self taught so I teach that way.
@@FatGuyFliesRC I was beginning to believe I was too old to understand all this new Spektrum radio stuff. 👍🙏🙏
@@JamesMarsh-w9f If I can figure it out anyone can!!!! LOL
Can you use rates and expo when you are flying with safe on
With Spektrums forwarded programing ,unless you change the values at that point the preset values will over ride you. But is not something that I mess with and only worry with rates and expo while in no gyro mode or as3x mode.
Thank you. Great help!
You're welcome!
Thank you!! Needed this info
Glad it was helpful!
Was helpfull to me. thank you
Glad it helped
Thanks!
You bet! AND THANKS!!!
Thanks for putting this video out! It’s a nice refresher for rates and expo settings. You’ve made me understand the concept of expo settings. I’m still stuck in the dark ages with my DX8 Gen 2 transmitter. I see how more versatile the NX10 really is. Perhaps one day I will make the transition out if the dark age. Anyway, thanks for another “how to” video!
Glad it was helpful! And may I suggest you stick to the NX series and not the IX series . The IX series uses a touch screen and has a much different interface. It is ok but I sent my IX 14 back hated it . I just think we as hobbyist and all the different aspects with the tech going into these transmitter and planes now are sucking to fun out of it and getting the planes so advanced that they wont need any real skilled discipline to fly them. I try my best to keep it simple as I can but still be as current as possible too. Hard wire to walk.
Thank-you for all your advice. It has made me more confident when flying, especially the scale airplanes.
Glad to hear it!
Just set up a new AR631 watching this video. Thanks of the help.
Glad I could help
Takk!
Question was this a super thanks? Did it cost you anything? I really appreciate it.
Approx 4 bucks equivalent……You’re welcome!
I saw you jailbreak video too! And the thrust reverser! Very good for learning, and entertaining at the same time😂
I’m now a Subscriber, and looking for an ESC with a yellow hotline……
BR,
Rolv (Norway)
Thanks and glad to help!!!
Nice video for us noobs. Thanks for the videos. Much appreciated
Glad to help
Tthanks😅
You're welcome 😊
@fatguyfliesrc newbie here willing to learn... Does the Dx8e do forward programing and safe with as3x? Following this video and several things are different. Probably got the wrong remote while tryi g to be on a decent budget! Thanks for the awesome videos!
Yes the Dx8e does but the screen looks different than my ix 14. It has a similar screen to the dx9 so watch this one i did :th-cam.com/video/_Kivd64I7b8/w-d-xo.html
@FatGuyFliesRC thank you sir!