Turnigy 9X Heli and Acro Flight Modes Explained - 3 Way Switch Setup
ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2024
- I get a lot of questions about setting up flight modes on your Turnigy 9X. Originally I started doing this in HELI mode because I figured that a multirotor is closer to a heli than a plane. But for the past couple of years I've been flying in ACRO mode. Now that I have the FrSky Taranis I create all my profiles from scratch.
In this video I go into detail about the differences in the Turnigy 9X 3 mode switch in both modes. A lot of confusion has stemmed from the throttle and pitch being linked together in HELI mode. I also demonstrate how to setup flight modes in ACRO mode, which allows you to get up to 6 different ones.
For reference, here are previous videos that I've done for different flight modes:
NAZA 3 Flight Modes in ACRO Mode:
• QAV400 - NAZA Wiring, ...
NAZA 3 Flight Modes in HELI Mode:
• DJI Naza 3 Flight Mode...
APM 2.5 6 Flight Modes in ACRO Mode:
• Turnigy 9X Stock Firmw...
I'm pretty sure a lot of Turnigy 9X users will appreciate this video :)
Great video. I just pulled my Turnigy 9X out of storage. Never used it, but I thought it would be a good time now. Then, I found this tutorial. Wow. Great for using the 3 position switch And a key difference between Acro and Heli mode. Again, thanks.
Glad to hear it and thanks for sharing your thoughts. It's a great TX for the money.
Dennis: Your videos are great. You explain things very clearly and specifically, and don't waste any time getting to the point. Thank you.
Thanks for the video. I've been flying helicopters for more many years and have no idea how to set this Turnigy for a Beta Flight which considers pitch channel as Aux2 in heli mode, and I couldn't figure out how to detach the pitch channel value from the left stick. This method is really clever. Thanks again.
Awesome! This is the exact problem I was having trying to wrap my brain around as someone who is new to the RC hobby. Thanks!!!
Glad to hear it. It's a really confusing thing to deal with when you're coming new into the hobby. This came through a lot of trial and error. Thanks for watching.
As a beginner, I pretty much learned everything from your videos. I sincerely thank you for your time and effort putting all these videos and information. I just built my first quad and programmed my Turnigy 9x radio into six flight mode as you had explained in your video. Worked like a charm!
That's the greatest feedback I could ask for. Thanks so much and glad it's helping. Best of luck with your build.
Thank u for easy setup explanation.
I finally got 3 mode switch to work properly.
Very useful and helpful video.
Thanks mate i figured out the issue of my flight mode for 9x :D after watching this
Brilliant Dennis thankyou!
+Trevor Vernon No problem. Thanks for the feedback.
Great vid dude, been trying to figure this out for the last 2 hours! :-)
Dries Dekker Thank you. Appreciate you watching.
nice video..i have not tried it yet cause i only fly fixed wing..now im building my1st apm 2.5 quad and my 1st mini 250 with a cc3d..im using flysky china 9x..have the taranis but its still in the box for almost 6 months now :)..my time has been eaten up by my job and holiday season..your video's are a nice reference for my new projects..thanks for posting such informative,straight forward on how "to" videos..
If you still have the taranis I would be willing to buy it?
im planning on using it in the future for my recently bought frsky LR9 2.4ghz long range receiver.aloft hobbies has taranis currently on stock.
Your videos help a lot!
Thanks. I appreciate the feedback.
Thanks soooo much! I was searching for this for a long long time :D
+Pyrosheep Creations No problem at all. Glad it helped.
Very helpful thanks🙂👍
YEAH! Thanks Dennis I have been wondering how the heck to do this on my 9x forever.
Great. Thanks for the feedback and I appreciate you watching. Take care.
This was awesome video Dennis! I just asked you in another video about this issue. Now i got what i need. ˆˆ thank you Sir so much. Hope you still use 9x. ˆˆ
Khai Dang I was about to answer your other question but glad you got it figured out. Thanks for watching.
Awesome... Very helpful. Thank you.
Not a problem. Glad it helped and thanks for watching.
Thanks for Flight Modes explanation .lol stayed up late trying to figure the 3 position switch..
Jason Gilroy RC B O H I C A No problem. I've have plenty of late lights messing with this stuff :) Thanks for watching.
thanks, everything works well :)
+David Oberto Dutari Cool glad to hear that!
I am thinking of getting a turnigy 9x and want to know how good is the manual for the controller in setting things up and thanks for this video
Thanks for ALL the videos you put out, very informative and useful info! My question; after flying my quad in acro with flight modes set on gear switch, if I change my settings over into heli mode and use three pos. switch the way you described, is there any difference in the flying characteristics ? Thanks and keep up the good work !
+David Latham Heli does have some different configuration settings like where the pitch trim follows the throttle if I recall correctly. Also I'd make sure your throttle curve is the same on heli before you make the switch. I switched from HELI to ACRO and never looked back, but now am flying with Taranis.
Hey,! Thanks for the tutorial. You should change the title, to hint, itsa about using the 3 position switch on the turnigy 9x. I got the link to your video from a forum, when asked for the swich setup. I did not find your video , just searching for the 3 way switch on youtube. :S
cerbenkoc Good suggestion. I'll do that. Thank you.
Hi Dennis,
Ivor here great Turnigy set up vid. Finally got my cable for radio calibration. Have set up my radio as per your flight mode setup video. I have to say your videos are the best, clear and concise. Trying to run Mission Planner on Mac via Boot camp, will see how that goes. Re making up a cable I didn't bother, easy and cheap to get on ebay.
Do you have RTL set on rear LHS switch?
Ivor Nathan Thanks for the feedback. Yes, when I was flying with the T9X the failsafe was on the rear left switch.
Hello Dennis, I bought a Turnigy 9x and I want to know if I can use it with the cc3d? This because I noticed that the 9x tr/rx is pwm, but the tx shows ppm. A bit confusing. Hopefully you can tell me more about this.
Hi thks for all the info. I'm flying a DIY Y6 and the problem I'm having is my model takes off so slow in acro compared to helicopter mode .
neil collins It's been quite some time since I've picked up my Turnigy 9X but my first guess would be to check your throttle curve in heli vs acro mode. Perhaps that's the culprit.
Hi - so for a Naza M with Turnigy 9x should I go to acro mode instead of heli? Or just follow the last bit of your video?
wigtype I was using Acro mode before I ordered my FrSky Taranis.
Hello Dennis,I have the flysky th9x and all I need is the 3 position switch to work the 3 flight modes in cleanflight betaflight..yes I am totally new to this,does the radio need to be set to helicopter instead of airplane to get this 3 way switch to work or does it matter what it's set at! I am a little confused on the settings..thanks
Dennis thanks for the vids you've posted. Quick question I'm hoping you or someone else might know.
Followed through the process for setting up the flight modes, but I can't get the pwm value to change when varying the uprate and downrate of the Gear switch/3 mode switch. When flipping the switch I jump from 1051 to 19xx. Any clue on why this might not be happening?
+Jon M Interesting. I haven't seen that happen before. Let me think on it and in the meantime maybe someone on the channel can chime in.
Great video Dennis. Always enjoy and get lots of info from your videos. I was able to set up my Turnigy 9X F. Mode (3 pos sw) per your instructions. I am using a CC3d FC. In mix1 I used dnrate = 046, mix2 008 and mix3 -030. This put it right in the middle of the flight mode channel values. I would be interested in knowing how you were able to figure out to use master=GYR and slave=FLP. Is this documented somewhere? Or are you a genius? Would appreciate any info you can share.
+abenwinUT Thanks for the good words. It was a lot of reading in the forums and trial and error. I'm definitely not a genius....just incredibly stubborn and hate letting things go :) Glad to hear you got your flight modes set up!
I have been wondering how to set this up! My ZMR 250 is in the postal system and my Naze32 just shipped today. Too bad my rx won't put CPPM out ch 1 to the Naze32.
Dean Cory Let us know how you get along with this setup. I have a Naze32 laying around and need to get it up in the air.
hello Dennis! Can you explain how can I setup PPM fly modes with Pixhwak? Only use possible 2 fly modes..!!!regards
Dennis, When I setup the 9x on the f450 quadcopter (naza m lite), it seems to not be giving it enough throttle and will not take off. Sort of like if it was too heavy. Just barely lifting at full throttle. When I switch back to the old transmitter, it fly's fine and strong. My flight mode switch works ok. It seems like it is something in the transmitter setting doing this. like something is limiting throttle to be 100% although throttle shows as 100% in the naza stick calibration..What setting do you think it could be on my 9X? Thank you Kindly!!
D Tragic I would definitely check your endpoints. I think you're right, that there's a limit at the TX config. Especially if your old TX works just find. Check the throttle curve and endpoints. Surely it's something in there. Good luck and let us know what you find out.
Hi Denis,
Do you know if this method for setting up the 3 way switch is the Same? for the Arkbird auto pilot,
Regarding, not having channel 5 connected
Hi! Well not having channel 5 connected is a function of your TX/RX. So just make sure you have your autopilot properly connected to CH6 on your receiver. And make sure it's connected to the proper port on your autopilot that is responsible for setting the flight modes. I hope that makes sense and good luck!
is there a preferred or difference in controllers ? ie, for mini quad ( racing ) or for the larger quads for filming, thanks.
***** A Turnigy 9X will work fine, but I really enjoy the Taranis for its ease of configuration. When it comes to mini quad or quads for filming it's more of an issue getting you gains setup properly to match the size quad you're flying.
hi can you show me how to change thr cut switch to RTL swith on my turnigy 9x thanks great work.
nigel webber I don't have my 9X right now so I can't remember if you can set the throttle cutoff switch as an auxiliary. If you can then you shouldn't have problems with this setup. Otherwise you may need to customize your firmware with er9x or opentx.
Hello Dennis,
Once again I followed in acro to FlySky TH9X and now, in display, it's the 3 position Doesn't move when stick. Did you forget to say how to configure aux 6 channel, or something more?
Good evening
Bruno
Bruno, it may be the way the templates are setup on the FlySky. I've never flown with it so I'm not sure about it. Perhaps check and see if there are any other heli templates you can work with. Otherwise, is there an ACRO flight mode that you can work with?
Hi Dennis - Thanks for your video!
I've just changed from the t9x stock reciever to a D8R-XP - and because I'm using CPPM my gear switch has taken control of channel 5 - Is it even possible to change this?!
Simon Webley I'm not sure if it is possible. It's been so long since I've worked with the stock firmware and I don't have access to it any more. Sorry I can't be of more help, but please share with us if you figure this out. Best of luck.
Hi Dennis! Thanks anyway but I flashed to er9x yesterday... Wow.. What a difference!!
Dennis could you please do a video for us newbys on how to set up a 5 channel plane for the th9x??Im were having problems and dont know where to start.Thanks.
George Martin I no longer have my T9X but if I get a hold of one I'll be glad to do a video. It's been a long, long time since I've used it to setup a plane. Sorry, wish I could be of more assistance.
Thanks just the same Dennis.Looking forward to it.Really like your videos.Thanks for replying.
i should set up my turnigy 9x transmitir to acro or heli mode to fly a 250 Race quad?
I think ACRO is the way to go and then you can tune it from there to fit your needs. I used to fly in ACRO all the time with a small 250 size frame.
+Dennis Baldwin i have acro set in my turnigy 9x The problem is i cant find how to set min throttle. In heli mode is easy, i got throttle curve option. The idea is when throttle stick is at 0 motors still spin slowly so i can still use yaw And roll. Do you know how to set this in Acro on turnigy 9x? thank you
Do you have any setup for an Xaircraft superx with Turnigy 9X? Need help on setup on my transmitter please
can anyone explain how to do that for heli -4 I don't know how but I fixed it so my left Gimbel vertically controllers throttle only horizontally controllers rud while the right Gimbel controllers the other 2 the problem is in the right one it shows them both moving in the same way (right Gimbel vertically ) and nothing on the horizontal one
My CC3D (openpilot/librepilot) detect 3 flight mode switch but not detecting any other AUX Channel. Im using Turnigy 9x. Do you have any idea why this is happening? there is something that i need to set on tx? i tried couple of things without sucess. I want to set up Gear switch to arm and disarm motors. Thank you
I'm not sure how to do that but will look into it and see what I can find out. If you figure it out first please share with us. Thanks!
Thanks Dennis, Do you have any idea how this works with w MultiWii pro 2.0?
In acro
I'm sorry but I sure don't. If I end up getting a MultiWii Pro I'll definitely look into it and let you know. I'm assuming it's similar to the MultiWii where you can figure it in the MultiWii GUI and your receiver connected to the Aux port on the board.
I played with Heli mode and a throttle curve for my multirotors. But always went back to a linear straight line for throttle. Not sure if the experts even use a throttle curve. Good question. I am capable, but noooo expert. What are your thoughts on a throttle curve for the multirotors.
I've always used a linear curve for my throttle. I know there are 3D guys that use curves, but I'm nowhere near that level of expertise. So linear has always worked well for my application.
4:32 How do I disable the throttle being linked with the pitch?
If I recall it's built into the heli mode settings. Have you tried ACRO? That should unlink the two.
Hey Dennis, I have a request to ask you, can you please make a video how to setup DJI Naza M Lite Intelligent Orientation Control (IOC) using FlySky TH9X, Please.
Thank you for all those video you have made to help us out, especially me I have learned a lot from them
QuadNet Hardy I would absolutely do that if I had that TX, but I don't. I no longer have my T9X either so this will be hard. If somehow I can get my hands on one I'll be glad to do a video.
How do you do the heli setting in the 9xr?
I'm not sure. I had a 9XR for a couple of weeks but then sent it to a friend. Let us know if you figure something out.
how did you learn to do this?
Where do i set my swash? All servo's are not working together.
Do you have any setup for an Xaircraft superx with Turnigy 9X?
Sorry I wish I could help with that one, but I'm not familiar with that FC. Please let us know if you get it figured out. Thanks.
thanks.
hey i just bought this product and my rudder/yaw dose not present middle while its stick is in middle position its having constantly spinning with simulator... it become better with +120 rudder trim but it wont fix it ........please help....
+Milad Mirzaie I would recommend trying a new profile with a different template than what you're currently using. Perhaps something in the template is messed up and causing your channel signals to not be at their defaults.
Dennis Baldwin Thanks for reply I already check that but its always same. I wish i could fix it with some special setting beside trim without actual repairing it.
i dont understand this.when i flick the gear switch now it messes with me thr. cut switch as well
I'm glad u took ur time and whent slow totally useless.
Narrated way to fast