12 3D printed tools you need for your workshop
ฝัง
- เผยแพร่เมื่อ 28 เม.ย. 2024
- UPDATE! Part 2: • 12 more 3D printed too...
3D printing can be incredibly useful! In this video I take you through some amazing workshop tools provided by the community for you to 3D print for free. The next time your non-3D printing maker buddies tease your 3Dbenchy collection, break out some of these gems.
Please share your favourite 3D printable tools in the comments below!
0:00 Introduction
V-roller bearing extractor: www.youmagine.com/designs/bea...
Bearing extractor video: • How to extract a beari...
1:09 Centre finding tools
Centre finder (straight): www.thingiverse.com/thing:672343
Centre finder (circular): www.thingiverse.com/thing:328...
Centre finder (drilling): www.thingiverse.com/thing:336...
4:27 Measurement tools:
Metric screw measuring device: www.thingiverse.com/thing:463...
Fillet gauge: www.thingiverse.com/thing:118...
Angle measuring tool: www.thingiverse.com/thing:214...
Lockable contour gauge: www.thingiverse.com/thing:472...
9:22 Sanding and painting:
Mini sanding block: www.thingiverse.com/thing:463...
Paint cones: www.thingiverse.com/thing:121...
11:32 Striking and cutting:
Thwack: www.thingiverse.com/thing:34404
Thwack V3 easier print remix: www.thingiverse.com/thing:172...
Tube cutter: www.thingiverse.com/thing:284...
13:48 Clamping:
Mini machine vise: www.thingiverse.com/thing:202...
Nano vise: www.thingiverse.com/thing:206...
Kant twist clamp: www.thingiverse.com/thing:283...
Kant twist assembly video: • Video
16:06 The next level!:
Hand held drill press: www.thingiverse.com/thing:358...
Dremel drill press: www.thingiverse.com/thing:754248
Transformable Dremel table saw / disc sander / shaper: www.thingiverse.com/thing:236...
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: / teachingtech
![[TH] VCT Pacific - Regular Season - สัปดาห์ที่ 4 วันที่ 2 // T1 vs ZETA | TS vs TLN](http://i.ytimg.com/vi/QKGUHmA6gwY/mqdefault.jpg)
![[TH]FFWS SEA Spring 2024 Knockout Stage - Day 12](http://i.ytimg.com/vi/DVnFpe52UV4/mqdefault.jpg)
Always nice to see one of my designs making another appearance! Thanks for including it in this video
@Marius Hornberger *Center Finder* does it. I gave away 5 as a present now. 2 new subscribers to your channel ;-)
Thank you for sharing your work!
great to see my favorite youtubers meet. i love the vacuum thing to catch drill dust, used it a lot!. i'm going to print the centerfinder too.
@Marius Hornberger when you make great stuff some day someone will notice :)
Aber wir brauchen mehr Content!
When he said your name, all I could think was... Mmmm... Burger...
For internal fillets, grab a deck of cards to slide into the curve. Then measure the outside curve of the deck.
Essentially a tiny contour gauge. Smart.
Or, a stepped rod or quarter rod with known diameters.
Michael, GREAT job as always! Your content continues to be some of the best out there. You clearly put a ton of time in preparation, filming, editing, etc. Keep up the great work!!!
I've been 3d printing for ages but never saw a lot of these designs. Very cool. You can never have too many clamps.
Thank you Michael! I just assembled my printer today. Watching this several months ago, I couldn't get over the ease with which such useful tools could be printed for use in my shop! I couldn't get your video out of my head, so I pulled the trigger and bought my first printer. Thank you! (I think!)
I agree. A lot of prints are just random stuff, but I appreciate both this videos usefulness and appropriateness(tools that would actually work if printed instead of being to weak for their purpose)
Good timing. I am visiting a handyman friend the end of this month and I plan to print and bring a few of these things as host gifts for him.
Many thanks Michael for the featuring. Since your video, the paint cones are downloaded by numbers! I wish people are enjoying them. I'm an early follower (with my home account) of your channel which is pretty interesting everytime. Thanks again and greetings from France ;)
Neat video! I found a most of these tools to be potentially valuable in my tool kit. Now I've got to start printing & assembling them!
Man, I absolutely LOVE your channel. All your videos have helped me so much with my journey into 3D printing. Thank you. Please keep up the amazing vids mate
This is one of the best 3d printing videos I have seen yet. It's one of the reasons why I bought one. Excellent content. Kids learning skills would also really benefit from content like this as well. Terrific job!!!
Absolutely! This video is the one that has finally pushed my hand, that's it, I am buying a 3D printer! Whoopi!! :)
I never knew I needed all of these neat tools until this vid - thanks!
I've seen so many of these "3d printed tools you need!" videos that were garbage that I very nearly didn't watch this.
But this was actually a good one. There are a few on here that I'm seriously considering printing.
Thanks!
Thank you Michael for an informative video. You would think I would look for tools that I can print instead of buying. Sometimes we need someone like you to point us in the right direction.
I will be printing most of these I think, I keep meaning to print a few of these but this is a great motivation to get them done. Thank you for the great video, especially showing the devices in use!
Wow amazing what some people can come up with. Thank you to all the people that put these models up!!!
Pretty much anything from Marius is worth getting. Dude is a genius.
This was EXACTLY the video I needed to see to get me stoked about buying my first printer. Thank you so much for sharing!
Me too. I'm going to be printing for a while!
great functional designs 👌
Oh hi there
The radius gauge is the best. I created one a few years back and printed it off. Saved me many tmes haha
It's the next thing I'll print, I hate estimating radii on filets!
@@MaximilianonMars you wont regret it. Tjey are the best
Thanks for the video Michael! I think I'll be printing that fillet gauge straight away.
Thanks for putting together this collection. A LOT OF USEFUL TOOLS!
I'm 42 with many years experience with tools & that very first center finder was badass, and something I've never seen before. I REALLY REALLY want one!
I'm just getting into printing. I'm waiting for my first printer to arrive in a few days. I'm blown away with just how much useful things can be printed. Saves so much money over the long haul being able to make these little tools at home that at the box stores can cost a fair amount of money over time.
What printer did u get
@@jacobdillon3635 I got the aquila x2. But don't waste the money on it. Get the original aquila. I've done a lot of printing since getting into it. Got my son and son in law an aquila. They love them. They work really well.
I've been using the fillet gauge for years. It's a must have tool if you model things.
Great designs!!
Great video as always
Thanks for sharing your experience with all of us👍😀
Very good presentation - you did your homework and showed us some practical toolage that can be custom made for our purposes. I will be printing some of these soon. Thanks!!
I doubted them seeing plastic tools in the thumbnail but the video surprised me. Now I'm looking forward to printing these. Thanks for sharing!
That last clamp would make an amazing microphone, camera, Smart phone mount for filming !
Great stuff to print off of a 3D printer. Oh, more stuff to misplace in the workshop, when looking for them. Can't wait to build these when I get a 3D printer. And a BIG THANKS! To all for their great idea to help hobbyists have a better workshop!
My husband has a 3-D printer and is always looking for something to help me in my wood shop. This is great. Now he has 4-5 things to make for me. Thanks.
thanks for taking the time to make this video, was skeptical at first but now i just have a huge list of things i want to print, looking forward to watching your other videos
as a welder/ fabricator i want to say that these are great. i legit want that centerline tool.
Kudos for giving visual examples for all of these, even the ones where you didn't have a great use case at the time. That's still a bunch of extra work that you didn't have to do. Thank you, and excellent quality video with lots of good information!
Impressive. Never thought 3d printed plastic gizmos could be so handy. Thanks for sharing.
The Thwack plastic hammer can also be used for jewellerymaking and stuff like that. But at that point you absolutely need to print it on its side as that is quite a bit of force
Yes I agree! Soft hammers/mallets come in very handy when it comes to jewelry making, as well as many other automotive repairs as well! When you're knocking a gear into place, you dont want to smash teeth. Rubber mallets are used often, but they're typically pretty large, and this plastic design gives ability to make a mallet to fit perfect size necessary!
@@atmosrepair nobody uses a rubber mallet to knock a gear into place. what the fuck are you smoking?
@@schlomoshekelstein908 Based on that user's name, there's a chance they're talking about gears in a clock.
Wow! I will absolutely be printing a good deal of these! Thanks for sharing mate!
Nice! A lot of great items here. The center finder is excellent, and I need that fillet gauge, badly. Time to preheat!
That Kant-Twist style clamp mimics the famous metal versions. That tubing cutter is ideal for square cuts on heat shrink tubing.
Tube and pipe notching templates for marking saddle cuts would be exceptionally useful.
I spied the Lowrider2 belt stops, and was hyped to see you have a Jimny!
I printed a dremel adapter that converted the dremel into a small router with a guide for cutting the binding channel on a guitar body and headstock. I have quite a few hold down clamps made on the printer along with enclosures, t-slot nuts, zip tie mounts.... etc (to infinity)
Great Job. I'm a beginner in case of 3D printing. So this examples are great. I look forward to see more of this stuff.
These videos are making me want to buy a 3d printer even more. The more I watch, the more things I see I can print and use one for. I have a few ideas for projects that I have yet to see on here, but I seriously want to design and make for myself. Stuff I know I can use and others as well.
I love these kind of videos. I think I'll print that tubing cutter tonight. Thanks for the video
The last clamp would be great for book binding!
Timeless and brilliant!
Those are some great examples! There are a couple of us at work with printers and we have made a few custom tools that we cant buy but would be crazy expensive it we sent out to have it done, very handy!
Thanks for all of your hard work! You have guided and inspired me many times. Thanks for the links!
Thanks for sharing, these are all useful tools. The drill press center finder in particular will be very useful. Also, I probably hate sanding just as much as you do.
This video goes directly in my favorite list...!!!
The 3D printing Terminator strikes again. The clamps are a work of art, really.
I must say I think Michael, has the best presentation technique of anyone on youtube.
Wonderful choices -- I'm just starting and wil be printing a number of these.
Lovely watch. Very tempted to side tracked from my current projects to print a few of these off. Very handy. :)
Great video, nice to see someone using one of my designs. Thanks for featuring!
the dremel table saw and cordless drill press are really interesting
I just saw this, and I thought it was a very thoughtful and useful video. Thank you so much for going through the effort of trying to help people :)
Handy stuff! I've spent a year making vacuum fittings so all of my tools can be attached to the same Festool vac hose. Proprietary bags and fittings no more!
Good selection of tools. Well presented! Thank you.
What great video, it's great to see all these collaborators sharing their designs, I 'don't have a 3D printer, but I feel maybe I should look into it, but one might be enough, I don;t want to become a hoarder.
This seems like perfect timing. I was just wondering what I wanted to print while I'm between projects. I can always go for another hammer!
Thanx for this informative and useful tools video. Definitely going to print a few of these.
Thank you for the ideas. Now realy excited to print few on them on my recently Ender extender’d E3 Pro.
I printed a smaller and a scaled up Twack. I freaking love them lol. Much bonking to be had.
thwack is 100% going in my list of first things to print, that looks just super useful
that tube cuter looks amazingly
this is the first 3d printing video where I can't find a single print I don't want to print. This is an incredible video. Thank you for making it!
Cant wait to print these all out and put them to use.
7:25 - That reminds me of the ruler set I bought for measuring tubing when I was building my hard-line water cooling loop. Wish I had my printer then!! lol
Printing the tube cutter. Very nice design.
Great video, thanks for sifting through the not-so-good tool designs for us. Also, loving the chopped shirt ;)
CHOPPED!
I really like the clamps, all of them.
Awesome stuff! Thank you for this!
I like this video- it's well done and the parts look useful. Thank you.
Great video! I love the MCM Chopped shirt!
Lots of good tools and good design! Cheers and great video btw 👍
Love your teaching style, chopped fingers shirt gets my subscribe!
Wow, thanks so much, my printer just paid for itself, the pipe centering tool just made my life so much easier, and wow...
That roundstock center finder is going to come in so handy for ECM barrels..
That tube cutter is the best of the bunch, especially since I could have really used it to cut the Capricorn tube for my Ender 3 Pro!
I love it that he doesn't just steal other people's design like another 3d printing channel I know (ejem..starts with an m and ends with an o and has a weird SZ in the middle) or just, like, say "I found this on thingiverse!!".
He actually gives people credit!
Funnily I found his comment just above yours.
@@NirateGoel ok
Always love these videos.
Useful stuff. Thank you!
Nice video! I prefer to print functional rather than decorative items. Thanks for sharing.
Alot of these are interesting, like the center marker/finder, cutting tool, sanding block... but I think things like contour gauge, angle finder and hammer, are much better bought
Wow!
Double Wow!!
This is the first video of yours I have run across. It's beautifully done and your explanations and examples are spot on.
I may work my way through this entire list as every single one of these, as you pointed out, is useful.
(Rang the Bell)
That screw measurement gauge is actually super nice
Thank you so much for reviewing my tool in the video. :-)
Came here on 10/22/2021 after seeing a shout out from Naomi 'SexyCyborg' Wu and seeing you wearing a Mighty Car Mods chopped tee shirt. I am very impressed with your style knowledge and personality. Your students are truly blessed.
Very useful for sure! Thanks for sharing!
Very nice collection of useful tools! Thanks.
There are a few things that I like and will print off, but one stands out to me. I use cantilever clamps quite often for professional use. Kant-Twist being a brand name and the ones I have always used. So I'm curious to see how well the non metal counterparts work.
A trick you can use when printing objects that have insets to take nuts- if the nuts are shearing the plastic insert, powder some baking soda into the hole. if you want, you can put some paper at the bottom to plug the hole and contain the powder. dust up the nut a bit as well. re-insert the nut. Then take a thin-consistency superglue and apply it around the edge of the nut, making sure it absorbs into the crevices. The powder will act like a sponge and soak up the glue. Once it dries it is rock solid. I used this trick when I made a small Dremel press. Used it for inset on the gear that raises and lowers the dremel. In testing I tried to see how hard I could force it down before it broke. It didn't lol. The rods that the dremel head was riding on popped out of the base first.
Nice! I'm really gonna print some of these 😁. Nice mcm shirt by the way 😉
He was in the BMW MCM videos
Fantastic Michael, these were great. Cheers, JAYTEE
I printed the contour tool and enabled ironing on the tines to get a nice smooth finish, I am thinking of reducing the width of the tines to increase the resolution as it gives thick castle edges at the moment.
Very good information in this video and awesome tools, thanks to all the designers! Any tips on some kind of tool (jig) to cut stair steps and risers? The commercial ones are so darn expensive for a one-off job.
Might try that center finder.
Sick of breaking 0.254mm bits when I've been trying to drill into 8mm tube.
My only regret about this video is that you can only click the thumbs up once. You got me printing again after a month long hiatus. Thanks a bunch.
Wow! Neat video! Now I’m thinking I need a 3D printing.