10 Useful 3D Printed Tools #2

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ส.ค. 2021
  • Get your things 3D printed at: www.pcbway.com/
    WIN Prizes at PCBWay 4th PCB Design Contest: www.pcbway.com/activity/4th-p...
    10 more 3D printed tools, which could be useful to you. You can buy this kind of tools from store, but why not to 3d print them.
    ✎STL FILES:
    1. Trim/clip popper: www.thingiverse.com/thing:489...
    2. Faker Knife: www.thingiverse.com/thing:489...
    3. Tire groove measure tool: www.myminifactory.com/object/...
    4. Razor scraper handle: www.myminifactory.com/object/...
    5. Carparter's square: www.thingiverse.com/thing:434...
    6. Oil filter wrench: www.thingiverse.com/thing:217...
    7. Spray can handle/trigger: www.thingiverse.com/thing:450...
    8. Poloh Brush: www.thingiverse.com/thing:171603
    9. Equal space divider: www.thingiverse.com/thing:304...
    10. Metric bolt and nut sorter: www.thingiverse.com/thing:465...
    Big thanks to models creators!
    ✎MUSIC:
    * Track: Vein - KV [Audio Library Release]
    Music provided by Audio Library Plus
    Watch: • Vein - KV | Free Backg...
    Free Download / Stream: alplus.io/vein
    * "Bombora - by Uniq" is under a Creative Commons license (Creative Commons - International Recognition 4.0 - CC BY 4.0)
    * "Reverse - by Uniq" is under a Creative Commons license (Creative Commons - International Recognition 4.0 - CC BY 4.0)
    ✎3D PRINTER: Creality Ender V2
    ✎FACEBOOK: / 3d-printsbuilds-101348...
    ✎INSTAGRAM: @3dprintsbuilds
    ✎TikTok: @3dprintsbuilds
    ✎Cults3d: cults3d.com/en/users/3DPrints...
    ✎THINGIVERSE: www.thingiverse.com/3dprintsb...
    #3dPrinting #Timelapse #3DPrintedTools
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 89

  • @Rebar77_real
    @Rebar77_real 2 ปีที่แล้ว +25

    Nice stuff. That "equal spacer" could use a wingnut on a small bolt to lock it in place to keep going without error. Thanks for the link!

  • @Sembazuru
    @Sembazuru 2 ปีที่แล้ว +5

    For the tire tread depth gauge and the bolt&nut sorter you can color the legends a little easier if you switch filaments to black (or other contrasting color) for the last couple layers. That'll save the marker issues that I always have of the ink running down and bleeding across the face of the part. The issue with the marker on the square is probably because the markings were debossed (sunken into the surface) instead of embossed (sticking out of the surface) like the tread depth gauge and bolt&nut sorter. But, since that was printed with the markings on a vertical surface, the color changing trick would be a major pain even on a printer that has decent M600 support.

  • @miked9959
    @miked9959 2 ปีที่แล้ว +5

    I enjoy this type of video and appreciate the time and effort you put into it. It's a great way to get ideas for future prints. Thanks!

  • @markschweitzer6920
    @markschweitzer6920 2 ปีที่แล้ว +3

    Why would I go through the tedious task of making that brush when I could do the same job with a cheap 25-cent chip brush?

  • @simonrancourt7834
    @simonrancourt7834 2 ปีที่แล้ว +29

    In #2, how do you change the blade, if it's all glued ?

    • @jasond9824
      @jasond9824 2 ปีที่แล้ว +9

      It appears to lock in the blade out position, but not lock in the safe to carry position. What a stupid overall design flaw

    • @chrisnupp7097
      @chrisnupp7097 2 ปีที่แล้ว +6

      @@jasond9824 I printed one, it locks it into both positions.

    • @chrisnupp7097
      @chrisnupp7097 2 ปีที่แล้ว +5

      It's not supposed to be glued in place. There's a tab by the blade divots (where the blade locks in place) that you can push out of the way to remove the blade and replace it.

    • @theanimationkingdom4
      @theanimationkingdom4 2 ปีที่แล้ว

      U cant.

  • @wanderingcalamity360
    @wanderingcalamity360 2 ปีที่แล้ว +2

    Did you just super glue what is supposed to be a replaceable boxcutter blade into that "faker knife"?

  • @budgiefriend
    @budgiefriend 2 ปีที่แล้ว +2

    Thank you for the update.

  • @taranagnew436
    @taranagnew436 2 ปีที่แล้ว +1

    for the nuts & bolts shorter, you should add the size to the nut side

  • @arne6787
    @arne6787 ปีที่แล้ว +1

    Spray can handle needs an adjustable end stop so u can just sqeeze handle and set the exact spray volume without the need to hold just the right squeeze to get what u want for spray pattern.

  • @tlocke0259
    @tlocke0259 2 ปีที่แล้ว +1

    What settings did you have to change on that first print? I’ve had that problem with one of my printers and don’t know how to fix it.

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว

      I changed line width from 0.3 to 0.4mm

  • @Priceman5
    @Priceman5 2 ปีที่แล้ว

    Do you have your print settings displayed anywhere? I just got a ender, and my prints never come out looking that nice.

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว +1

      Cura profile for Ender 3 V2: www.mediafire.com/file/sxlrfx1jiebkcif/Ender_V2_Basic_settings.curaprofile/file

  • @kotsioschristou8472
    @kotsioschristou8472 2 ปีที่แล้ว

    what cura settings are you using for those clean prints?

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว +1

      I have different settings for different prints, but I can share my basic Ender v2 PLA profile: bit.ly/2Zg40Ff

  • @robinferdinando4038
    @robinferdinando4038 2 ปีที่แล้ว

    Awesome video and content 👌 what does R. F on the oil wrench mean?

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว

      Thanks! The R. F. are the initials of the designer. Rusty_Fly

  • @jasongibson4539
    @jasongibson4539 2 ปีที่แล้ว +1

    On your recessed groves,(like the carpenters square) you should try a wax crayon 🖍 instead of a sharpie. It works great. You can rub off any excess with a paper towel for clean marks.

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว

      Thank you for the idea. I will try it someday.

  • @carlosgroes8573
    @carlosgroes8573 2 ปีที่แล้ว

    The nr10 yellow bolt and nut sorter.. you got a link? For the file

  • @mateusztokarski7553
    @mateusztokarski7553 2 ปีที่แล้ว

    I have the same problem witch my 3d prints that you in first print. What did settings you change.

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว

      Changed line width back to 0.4mm

  • @jonathanpaz5453
    @jonathanpaz5453 2 ปีที่แล้ว

    What did you applied to the spring?

  • @ElecTechie
    @ElecTechie 2 ปีที่แล้ว

    Nice .. Can I have the wood burner link and permanent marker link?

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว

      Wood burner: s.zbanx.com/r/0oD7Tzj2iDwR
      Permanent marker: euro-industry.com/main.php?index=details&cat=8&prod=23201550&lang=de

  • @imaker3183
    @imaker3183 2 ปีที่แล้ว

    Привет а ты не печатал корректоры в фары для е39. Спс если есть стл скинь плиз. Удачи

  • @mohammadajmin1542
    @mohammadajmin1542 2 ปีที่แล้ว +3

    Look so cool that bro

  • @3design284
    @3design284 2 ปีที่แล้ว

    nice combination of useful tools. keep uploading. good luck .

  • @3dprintingmodels913
    @3dprintingmodels913 2 ปีที่แล้ว

    i like the concept very much 💕👌👍

  • @S....
    @S.... 2 ปีที่แล้ว

    Nr. 1 Trim/Clip popper - what filament is it, please?

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว

      PLA

    • @S....
      @S.... 2 ปีที่แล้ว

      @@3DPrintsBuilds Dude.. what brand / color? xD

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว +1

      @@S.... Gembird Gold Metal PLA

  • @styxx0500
    @styxx0500 2 ปีที่แล้ว +2

    It's more expensive to make these than it is to buy ones that are readily available on Amazon lol

    • @pcerano742
      @pcerano742 3 หลายเดือนก่อน +1

      Lol. Most of these prints probably cost less than $1.50.

    • @styxx0500
      @styxx0500 3 หลายเดือนก่อน

      @@pcerano742 and yet, they aren't even worth $1.00 🤣

  • @psdmaniac
    @psdmaniac 2 ปีที่แล้ว +5

    Only spacer and bolts measure tool are useful. The rest are good only in collecting a dust or filling recycle bin.

  • @Kevin-wy8kc
    @Kevin-wy8kc 2 ปีที่แล้ว

    amd why didnt you loosen the oil filter cap that fit perfectly?

    • @alexistaboada5759
      @alexistaboada5759 2 ปีที่แล้ว

      Bc the tool would have disintegrated with any amount of load

  • @Ghazkul666
    @Ghazkul666 2 ปีที่แล้ว

    You have a typo in your ad, the word you want is "stuff" not staff

  • @granul555
    @granul555 2 ปีที่แล้ว

    Hi. Which slicer do you use?

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว +1

      Cura

    • @granul555
      @granul555 2 ปีที่แล้ว

      @@3DPrintsBuilds How did you get the numbers printed on top? They look bad to me when printed.

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว

      @@granul555 Look over your print settings. Maybe you need to slower down or change layer height.

    • @granul555
      @granul555 2 ปีที่แล้ว

      @@3DPrintsBuilds Can you please share your Cura settings?

    • @3DPrintsBuilds
      @3DPrintsBuilds  2 ปีที่แล้ว

      @@granul555 I use different settings with different prints and printers. Here is one of my Ender V2 settings: www.mediafire.com/file/v0l8ifqz7seiazs/Ender_v2_0.2mm.curaprofile/file

  • @vickys9191
    @vickys9191 2 ปีที่แล้ว

    Print = 'auxiliary handle' for drill machine.

  • @3DJapan
    @3DJapan 2 ปีที่แล้ว

    Whipping that blade around was freaking me out.

  • @tbm7301
    @tbm7301 2 ปีที่แล้ว

    i saw that 3d guns folder, can't stop the signal.

  • @user-fl5nm5uf9h
    @user-fl5nm5uf9h 2 ปีที่แล้ว +3

    👍 👍 👍 👍

  • @ryanokeefe12
    @ryanokeefe12 2 ปีที่แล้ว

    Lol... why did you glue the blade into you knife?

  • @makewithmegma
    @makewithmegma 2 ปีที่แล้ว +1

    🔥💕👌👍

  • @johnschroeder6351
    @johnschroeder6351 2 ปีที่แล้ว

    I will have to get my printer set up so I can utilise it better.

  • @bossmassful
    @bossmassful 2 ปีที่แล้ว

    Полезные инструменты? Ну уж линейку то можно купить в магазине. Как и почти всё остальное

  • @dldgranite1931
    @dldgranite1931 2 ปีที่แล้ว

    Is everybody just that messed up every one of those things that I see I don’t have the design I don’t have the figure out the way to print it or make it I don’t have to buy the printing material to do it it’s already there all I Gotta do is go to the damn store and buy it and once I figure out the time spent and the printing material it’ll be about 75% cheaperIf I just go buy it

    • @andrewjackman8926
      @andrewjackman8926 ปีที่แล้ว

      Got a headache reading your comment. No punctuation?

  • @chibyshev
    @chibyshev 2 ปีที่แล้ว

    Игрушки и ее более того.

  • @therealfocusin
    @therealfocusin 2 ปีที่แล้ว

    Jump to 8:43 believe me, watch till the end. Don't waste your time like I did.

  • @ErCapoAlex
    @ErCapoAlex 2 ปีที่แล้ว

    Hii

  • @yomiyoo
    @yomiyoo 2 ปีที่แล้ว

    Or maybe just buy a cutter and save the 6 hour of printing

  • @rubino1988
    @rubino1988 2 ปีที่แล้ว +1

    If you have to use super glue on a removable part it's not convenient

  • @TsurinoDazuji
    @TsurinoDazuji 2 ปีที่แล้ว

    gdzie na stole kroisz.. matka by Ci zaraz pokazała ciachanie na stole

  • @dr.emmettbrown8466
    @dr.emmettbrown8466 2 ปีที่แล้ว +1

    Самоделки полная хуйня (с) Доктор Дью ((((

  • @3dcrazy332
    @3dcrazy332 2 ปีที่แล้ว

    ☝️ I'm the first person to design "print in place" brooms and brushes about 8 years ago.

  • @unknownflyer90
    @unknownflyer90 2 ปีที่แล้ว

    Can't you spell?

  • @user-nq1lg5ww1c
    @user-nq1lg5ww1c ปีที่แล้ว

    Useless

  • @MrToufou54
    @MrToufou54 2 ปีที่แล้ว

    Seriously ? What have you done here ? You are not the owner of designs, you just publish timelapses of your printer printing other guys work !

    • @warmesuppe
      @warmesuppe 2 ปีที่แล้ว +5

      Where does he/she claim that?

    • @LoreLibrary-Official
      @LoreLibrary-Official 2 ปีที่แล้ว +1

      Where do they claim its theirs

    • @brandielee7971
      @brandielee7971 2 ปีที่แล้ว +5

      They don't claim the designs are theirs, and they link the the stuff. It's just to make people aware of the files

    • @MrToufou54
      @MrToufou54 2 ปีที่แล้ว

      So, yes everybody, but where are the credits (in the video) ??? Where is the creativity ? What does this video give more than a search on stl search engines ? I'm just saying that there is no work on this video... I'm here for having more that just that I could by myself

    • @LoreLibrary-Official
      @LoreLibrary-Official 2 ปีที่แล้ว +1

      @@MrToufou54 yes u can do it yourself..this just show to people that these file exist..the maker of the file allot them to do this cuz its freeeeeeeeee

  • @WoodenCreationz
    @WoodenCreationz 2 ปีที่แล้ว +2

    I need one of those Faker ꓘnifes.... lol Thanks for the share.. Just stumbled upon your channel!!!