Beautiful setup. Love the Zapco amps. I am running a Zapco DSP right now and love it. You should find some Desert Dwellers tracks to play. Very deep and wide mixes with great use of the space. Very nice build!!!
Man I can tell that this system sounds really really nice for a video I can hear the clearness of the tweeters in the video unbelievable man good job to all you people who gave him thumbs down middle finger up to you this guy did a wonderful job designing the sound system in his car
I am watching your channel already a few days now. Im an audiophile and I’m impressed by the work you do There are a lot of huge loud sound systems in the internet but they lack quality and design Your is work of art I hope more people will be interested in such car audio because it’s more complicated and more beautiful.
What normally happens is that people think that the equipment is the key to get great results, whereas it’s more in the installation and tuning. We have a whole playlist for the progress of the installation of this project. Check that out please and you can see what went into this system.
Hi, I hear a lot of bass. Now it’s going to many people. But I think the tonal balance is not enough, since the sub and mid speakers are not directed to the car interior (front of them) I also do not use grids - they affect the sound (I use grids when I compete , I have a 4-way system and listened to different cars with SQ sound). But in general - everything is very beautiful, great work! My installation looks very bad compared to yours, I do not have so many tools, premises and material to make it so beautiful 8(
This is an amazing build and the sound quality is just as amazing through my headphones. I can only imagine how it sounds in person. I am currently preparing myself for an SQ build and I have noticed the Fiio x5 in your builds. I don't know much about this device and want to educate myself more on it. I believe you said that you run the x5 directly to the processor. Is that correct? I am also interested in in the front stage speakers. I currently have 2 Mosconi Gladen As 100.4 amps. I have not decided on sub and sub amp. I plan to install in a 2015 Kia optima. Man I wish I was overseas to meet with you! I have done very loud cars but this will be my 1st SQ car and I want it done right. Your vids are definitely helping me out! Thx
Incredible ! serious envy ! and even though mine is just awesome this is too ! i wish one day to experience this animal , what a superb job you have done, again ! as always well done to you peter, you just keep keep reaching mate, its what you do best ;)
Thanks man for the video. You’re always doing some dope work. Had to order one of those fiio’s for my zapco hdsp v. Was going to use a p99rs as source but i guess there’s no need now lol
There are quite few builds we did with ScanSpeak and SbAcoustics. Home audio drivers usually have no real support in the caraudio industry, so it’s the same story everywhere.
I know this is an old video, but what did you do on the magnets? It looks like you have a boot or something similar. I talked to John about providing boots, but he says he knows of none on the market that fit the magnet correctly.
@pssound9749 It looked like you had a cover around the magnet slugs, like a rubber boot or something similar- but based on your response, now I'm assuming there is nothing. I have been looking for something to put on my SBP motors to "finish" them as I don't think the raw magnets look clean. Thanks for the response Peter
@@tylormcvey1493 yes, we put nothing over it in this build. By the time we stripped this car 3 years later and had to move the subs to the owner’s next car, the bottom plate got slightly oxidised and it didn’t look great at all, so we taped it up and spray painted it, but we didn’t touch the magnets. You can see what they looked like in the Porsche Taycan projects. ✌🏼
Hello Peter sorry to bother but I'm curious is it ok to upgrade the ground wire on the w213 ? I just don't want to confuse the car charger system and throw it out of whack.
Hello Peter I’m from the states and I’m planning on having five star car stereo dean and Fernando do my w213 in a few weeks my question is with all that power you put in that vehicle did you add a battery?
Is it normal for a DSP tuned system to sound dull? Like the morel tweeters after tuning no longer have the crisp highs to my ears. Using Helix DSP and Audison amps tuned by a champion tuner. Im not competing but just want good sound.
Hello i really like your system. I am trying to do one of my own. I need some help. I have someone who is attempting to install the Stinger Heigh 10 unit in my 2012 Mercedes E63 Amg. I was using one of those Chinese model android10.25 screens but it was full of errors and cliques. I want to keep the original look of my interior. I can't find a kit for my vehicle. I am having a custom install done. I was told by a professional installer that the PAC RC1 would not allow my steering wheel controls to work. I was told by the shop where I purchased the unit that the PAC RC1 would work but it had to be compatible with the Clarion systems otherwise it would not work. The Mercedes original system is a fiber optic network. I am connecting this unit to 2 JL Audio VXI 8 channel DSP amplifiers and a JL Audio HD 1200/1 amplifier to run my 13 inch W7 subwoofer. I am using Morel Virtous speakers 3 ways components in the front and 2 way Morel Nanos components in the rear. I am also using Morel Virtous Integras for my rear center stage and Morel 2 inch for my front center stage. I am hoping this will work in my vehicle. I have been unable to find any resources to help with information for this install. I am in northern California and most professional shops have not installed the Stinger Heigh 10 that I have contacted. I called the Stinger company and they were not helpful either. Any help you could give would be much appreciated. If not wish me a lot of luck. Thanks
Hi, If you watch the playlist of this build and the introduction too, it’ll be clear how much i hate to install headunits and prefer to do any other option, like a phone/DAP/tablet, etc which give better source quality. Yes, you loose steering wheel functions, but heyhoo, something for something. To tell you the truth I haven’t sold a HU for 5-6 years, not worth the hassle, especially as new cars have fully integrated HU in the dash. Your best bet is to buy a car which has lossless playback option of some sort and has MOST integration capability, so you can get optical signal from OEM source.
Hi Peter, awesome system in such a cool car! May I ask about how the front speakers are powered please? There’s 4 amps that are 2ch each - could you explain what’s wired to what amp? I guess one amp is running bridged to the rear subs, one amp is running the front subs which leaves 2 amps, is all this power required to run the fronts? I’m just trying to work out how you get all the channels required for fully active.
markcoe69 in a fully active system every single speaker requires a dedicated amp channel, so they can be driven by an individual channel from a DSP. In this case we have 4x2 amp channels, so 8 for 8 speakers, 6 upfront and 2 subs. Is it making it clearer for you?
Thanks Peter, yes that makes sense now. I was (and still am) surprised by the size of the amp for the mids and highs. Thank you for all of your videos and efforts in making them, I’m a bass head from 20 years ago and returning to car audio and learning SQ as much as possible before I make a build. Your videos are such a great help.
markcoe69 these 400.2s are absolute overkill and pointless for mid-high, i would always use the 150.4 for those, but the owner was just so set on having 4 matching amps, that we couldn’t convince him to do otherwise. Watch the SQ in Car playlists, that will help a lot! 👌
First off, AHHH-MAZING install and products! Top Tier work all around. Random question tho…. Since you can power the system without using the actual OEM radio, does the car’s talking come through the aftermarket speakers when driving, I.E. Music lowers and directions when using the navigation, etc? Again, great job on the install.
Hi, No, in this car the system we built was completely independent. Back in 2018 integration on MOST150 was very expensive and difficult to make happen in the short time we had for the install, but now it’s easily doable and you could maintain all OEM functions.
Ahhhh, now I see why the trunk was so extravagant in some regards. That bit of knowledge adds another notch or two to your shop’s skill level IMHO. Thanks for the video, the quick response, and again AWESOME install and AMAZING work. Stay blessed.
I paid a lot of money when ordering a new car . E class With its 23 high-performance loudspeakers and 1,450 watts of system output power, distributed onto 25 amplifier channels, the Burmester® High-End 3D-Surround-Soundsystem of the E-class represents an effort which has no equal in this vehicle segment. Like this told me dealer. But I want really subwoofer with bass.
unclesamthepimp We have 4 huge amps, but they run an active setup, so they don’t draw as much as an SPL system where all amps run subs full tilt. We added another AGM battery located under the amprack and it’s absolutely fine.
Pssound... nice! Thanks for the reply. I was just wondering because I drive a 2010 mercedes e350 I was kinda worried about my bass old school PPI amp it's a PPI pc 2350 its 700×2 at 2 ohms or 1400×1 bridged at 4 ohms. It's a AB class. I'm going to try the second AGM battery in trunk!! Thanks
unclesamthepimp Don’t save on a good battery! In order to make power, you need power! Also, regular charging with a smart charger is recommended to keep them looked after.
SPL is where bass becomes a pain (for some people that is fun though), probably above 145-150dB. This is not even close to it, but is a very capable SQ system that can hit concert levels.
Looks awesome but uh...all that money spent and it just runs off an iPod/cell phone? Couldn't even hook it into the existing display and mercedes controls? Its not hard to do that
@@pssound9749 I'm not saying its bad to have iPod/mp3 player compatibility, just as long as the OEM HU still works too. People want to retain the steering wheel controls, and console knob and display they paid for when they bought a mercedes. Otherwise it just feels like a cheap honda build
@@jcdentonunatco when this systems was planned and built in 2018 there wasn’t an option for MOST integration in this car, that didn’t cost a fortune, so the owner decided to have this Fiio DAP as alternative source to play lossless files. It’s not an iPod, not even close to it. You would surely be happy using the OEM controls and radio, but what’s the point if you play poor quality into a system like we built? It’s a bit like having a 4K TV and playing VHS 📼, which would look bad even if you have an expensive TV. Hopefully now you see it better. In his current car we could do MOST150 integration getting digital signal out of the OEM HU and also being able to play lossless files. It’s definitely great to have that option when it’s doable.
@@pssound9749 Strange. I have done a 2012 mercedes with MOST integration way back in 2014, it was pretty plug and play, no fancy wiring required. (I think we used mostly Audison stuff). All working with the existing fibre optic connection. That's great that you are playing lossless audio on the Fiio, but you can do the same with the OEM HU. Its a Mercedes, it was designed for lossless audio in mind when it was engineered.
@@jcdentonunatco oh yes, what you had is MOST25, these cars are MOST150, very different story and way more expensive! If you can’t have MOST, then you’d do low level integration and go through the factory amp and that’s what we didn’t want, hence the Fiio straight into DSP.
and just one more thing why did u make a custom pillar mount for midbass and tweeter when you already had mid 10 cm enclosure and tweeter enclosure just above that ? did you just make a double tweeter and double 10 cm enclosure setup or what ? is that pro or what ?
Marian Factory mid and tweeter locations are not used at all. What’s more, the whole factory system is not used at all! 😃 Those locations are not optimal acoustically to get the best sound possible for the driver, hence we built custom pillars.
install seems well done but sorry, mono recording on a less than decent video and microphone rig did fully ruin the initial intent of sq demo for us thru youtube !
Sounds beautiful through my headphones like I'm in the car!!
Gorgeous sound system. Plain ans simple. Very well done! It is so well done that I am at a loss for words!
T. Rat yes, we had to keep it “simple”, so the car can be converted back to factory once the system comes out!
Brothers in Arms sounds amazing, even through my headphones! Amazing installation!!
Thats a beautiful install Peter you did a awesome job!
Sounds incredible even through my MacBook pro speakers! Those highs are crispy!
Top of the line work.......top of the line sound......spectacular! Massif Sown!!!!! Big up PS!!!!!
Alrich Carry on watching the rest! 😉😃
Will do.....champion sound.
Beautiful setup. Love the Zapco amps. I am running a Zapco DSP right now and love it. You should find some Desert Dwellers tracks to play. Very deep and wide mixes with great use of the space. Very nice build!!!
Sam Champlin Thank you! 🙏
I check the artist out! 👌
man of culture. I love psychedelic music like that.
Man I can tell that this system sounds really really nice for a video I can hear the clearness of the tweeters in the video unbelievable man good job to all you people who gave him thumbs down middle finger up to you this guy did a wonderful job designing the sound system in his car
This is a good review with clean sound quality ☝🏽
This is the best audio system in the car I have seen
Hope one day I can afford this kind of audio equipment
Bravo guys nice work
Ohh we built many better ones since this system. Check out the walkaround/EXPLAINED playlist. 😉🔊🔊
I am watching your channel already a few days now. Im an audiophile and I’m impressed by the work you do
There are a lot of huge loud sound systems in the internet but they lack quality and design
Your is work of art
I hope more people will be interested in such car audio because it’s more complicated and more beautiful.
Subed cause it be hard to find sq builds its always bass builds love bass builds but also love sq
Saludos desde Puerto Rico. Amazing sound... I like it.
Wow this system sounds awesome. Just wish you had list the equipment and speakers in the discretion.
What normally happens is that people think that the equipment is the key to get great results, whereas it’s more in the installation and tuning.
We have a whole playlist for the progress of the installation of this project. Check that out please and you can see what went into this system.
Hi, I hear a lot of bass. Now it’s going to many people. But I think the tonal balance is not enough, since the sub and mid speakers are not directed to the car interior (front of them) I also do not use grids - they affect the sound (I use grids when I compete , I have a 4-way system and listened to different cars with SQ sound). But in general - everything is very beautiful, great work!
My installation looks very bad compared to yours, I do not have so many tools, premises and material to make it so beautiful 8(
Awesome sound and setup
what are the speakers in the footwells
also do you eliminate all the original speakers?
@Peter i hv listen to ur demo cars with mundrof and acudons bt these sounds to me best.
They are truly special! 😎🔊🔊
This is an amazing build and the sound quality is just as amazing through my headphones. I can only imagine how it sounds in person. I am currently preparing myself for an SQ build and I have noticed the Fiio x5 in your builds. I don't know much about this device and want to educate myself more on it. I believe you said that you run the x5 directly to the processor. Is that correct? I am also interested in in the front stage speakers. I currently have 2 Mosconi Gladen As 100.4 amps. I have not decided on sub and sub amp. I plan to install in a 2015 Kia optima. Man I wish I was overseas to meet with you! I have done very loud cars but this will be my 1st SQ car and I want it done right. Your vids are definitely helping me out! Thx
Incredible ! serious envy ! and even though mine is just awesome this is too ! i wish one day to experience this animal , what a superb job you have done, again ! as always well done to you peter, you just keep keep reaching mate, its what you do best ;)
dang you got yourself sum firme tweeters
Stellar build.
Thanks man for the video. You’re always doing some dope work. Had to order one of those fiio’s for my zapco hdsp v. Was going to use a p99rs as source but i guess there’s no need now lol
Jaye Bass Nah, we don’t like HUs! 😃
All your music can be in your pocket, anywhere, anytime in hi-res! 👌
Hi Peter why don't you ever install scan speak speakers are they not good enough ???
There are quite few builds we did with ScanSpeak and SbAcoustics.
Home audio drivers usually have no real support in the caraudio industry, so it’s the same story everywhere.
Sound quality so superb, he got copyrighted on the songs he played! 🔥
I know this is an old video, but what did you do on the magnets? It looks like you have a boot or something similar. I talked to John about providing boots, but he says he knows of none on the market that fit the magnet correctly.
What do you mean by what i did on the magnets?
@pssound9749
It looked like you had a cover around the magnet slugs, like a rubber boot or something similar- but based on your response, now I'm assuming there is nothing.
I have been looking for something to put on my SBP motors to "finish" them as I don't think the raw magnets look clean.
Thanks for the response Peter
@@tylormcvey1493 yes, we put nothing over it in this build. By the time we stripped this car 3 years later and had to move the subs to the owner’s next car, the bottom plate got slightly oxidised and it didn’t look great at all, so we taped it up and spray painted it, but we didn’t touch the magnets. You can see what they looked like in the Porsche Taycan projects. ✌🏼
Hello Peter sorry to bother but I'm curious is it ok to upgrade the ground wire on the w213 ? I just don't want to confuse the car charger system and throw it out of whack.
I guess we added an extra 0ga to it which shouldn’t cause any issue. It was fine for 3 years in his with an extra 60Ah AGM battery is this one.
Sound Fire 👍👍👍🔥🔥🔥
Do you sell that stand for the fiios x5 and if not where can I find one?
Tony Russell they are custom 3D printed by us.
Is there a notable difference when mounting mounting mid and tweet vertical vs horizontal?
VodkaDthMetalSpryPnt it rather depends on the distance between the mid & tweeter.
Hello Peter I’m from the states and I’m planning on having five star car stereo dean and Fernando do my w213 in a few weeks my question is with all that power you put in that vehicle did you add a battery?
Hi,
We had and extra 60Ah AGM under the rack. You can see photos of it on Pssound Fb in the photo gallery.
Thank you
what are the crossover points on the drivers?
Iirc 60/170/8000 LR24
How much does that cost full set up including labor ?
It depends on where you live as labour can be widely different. Equipment was ~ £10k + 250 hours of work.
@@pssound9749 how much would you charge for a job like that if I was to come to you ?
@@whapzla8071 please send an email to peter@pssound.co.uk.
hi Peter.Thanks for your videos once again! One question: No midbass in doors or dash? only front subs?
Jesus Martin hi those drivers in the firewall work as midbass in 60-200Hz range, they are not subs.
amazing 🔥🔥
Is it normal for a DSP tuned system to sound dull? Like the morel tweeters after tuning no longer have the crisp highs to my ears. Using Helix DSP and Audison amps tuned by a champion tuner. Im not competing but just want good sound.
bubba wubba that is not normal. Who was that champion tuner if i may know?
@@pssound9749 i dont know if i should make his name public here
bubba wubba then send a message to peter@pssound.co.uk
@@pssound9749 sent you an email
Hello i really like your system. I am trying to do one of my own. I need some help. I have someone who is attempting to install the Stinger Heigh 10 unit in my 2012 Mercedes E63 Amg. I was using one of those Chinese model android10.25 screens but it was full of errors and cliques. I want to keep the original look of my interior. I can't find a kit for my vehicle. I am having a custom install done. I was told by a professional installer that the PAC RC1 would not allow my steering wheel controls to work. I was told by the shop where I purchased the unit that the PAC RC1 would work but it had to be compatible with the Clarion systems otherwise it would not work. The Mercedes original system is a fiber optic network. I am connecting this unit to 2 JL Audio VXI 8 channel DSP amplifiers and a JL Audio HD 1200/1 amplifier to run my 13 inch W7 subwoofer. I am using Morel Virtous speakers 3 ways components in the front and 2 way Morel Nanos components in the rear. I am also using Morel Virtous Integras for my rear center stage and Morel 2 inch for my front center stage. I am hoping this will work in my vehicle. I have been unable to find any resources to help with information for this install. I am in northern California and most professional shops have not installed the Stinger Heigh 10 that I have contacted. I called the Stinger company and they were not helpful either. Any help you could give would be much appreciated. If not wish me a lot of luck. Thanks
Hi,
If you watch the playlist of this build and the introduction too, it’ll be clear how much i hate to install headunits and prefer to do any other option, like a phone/DAP/tablet, etc which give better source quality. Yes, you loose steering wheel functions, but heyhoo, something for something. To tell you the truth I haven’t sold a HU for 5-6 years, not worth the hassle, especially as new cars have fully integrated HU in the dash. Your best bet is to buy a car which has lossless playback option of some sort and has MOST integration capability, so you can get optical signal from OEM source.
So can you play with the seats still up or not at all?
Yes you can. Check out the trunk IB playlist and the measurement test with seats and trunk lid in all sorts of positions.
Compared to this setup how does the OEM Burmester compare?
Alexei Sang Bleu can you compare a VW Beetle to a Porsche 911? 😃
Burmester sounds like a tin can compared to this. You would be shocked that it could be so different.
Only bad thing I can say bout the whole set up is "DAMN"
What subs are these?
Gnik4144 Acoustic Elegance IB15AU subs designed for infinite baffle application.
So no need for an enclosure? Infinite baffle with a nice beauty panel is the way to go.Still gotta lot of trunk space.
Trunk IB works very well! 👍🔊🔊
Hi Peter, awesome system in such a cool car! May I ask about how the front speakers are powered please? There’s 4 amps that are 2ch each - could you explain what’s wired to what amp? I guess one amp is running bridged to the rear subs, one amp is running the front subs which leaves 2 amps, is all this power required to run the fronts? I’m just trying to work out how you get all the channels required for fully active.
markcoe69 in a fully active system every single speaker requires a dedicated amp channel, so they can be driven by an individual channel from a DSP. In this case we have 4x2 amp channels, so 8 for 8 speakers, 6 upfront and 2 subs. Is it making it clearer for you?
Thanks Peter, yes that makes sense now. I was (and still am) surprised by the size of the amp for the mids and highs. Thank you for all of your videos and efforts in making them, I’m a bass head from 20 years ago and returning to car audio and learning SQ as much as possible before I make a build. Your videos are such a great help.
markcoe69 these 400.2s are absolute overkill and pointless for mid-high, i would always use the 150.4 for those, but the owner was just so set on having 4 matching amps, that we couldn’t convince him to do otherwise.
Watch the SQ in Car playlists, that will help a lot! 👌
First off, AHHH-MAZING install and products! Top Tier work all around. Random question tho…. Since you can power the system without using the actual OEM radio, does the car’s talking come through the aftermarket speakers when driving, I.E. Music lowers and directions when using the navigation, etc? Again, great job on the install.
Hi,
No, in this car the system we built was completely independent. Back in 2018 integration on MOST150 was very expensive and difficult to make happen in the short time we had for the install, but now it’s easily doable and you could maintain all OEM functions.
Ahhhh, now I see why the trunk was so extravagant in some regards. That bit of knowledge adds another notch or two to your shop’s skill level IMHO. Thanks for the video, the quick response, and again AWESOME install and AMAZING work. Stay blessed.
Espectacular hi end
so does he ride with the back seats rolled down all the time or what ?
Marian Haha, surely! 😂 It’s still alright with rear seats up, but then how would i show the subs to you? 😜😃
Damn that thang sound good!
Just need some bass to go with that wonderful crisp clean sound
Michael Mayeur then you haven’t watched the video properly as this setup has more than enough bass! 😂
I paid a lot of money when ordering a new car . E class
With its 23 high-performance loudspeakers and 1,450 watts of system output power, distributed onto 25 amplifier channels, the Burmester® High-End 3D-Surround-Soundsystem of the E-class represents an effort which has no equal in this vehicle segment. Like this told me dealer. But I want really subwoofer with bass.
murad kuychiyev and did you believe all that? 😃
No.
$5.200 for Mercedes sound I paid. I will show you after new year holidays. I install nice subwoofer.
Beautiful work once again... what model hybrid audio midbass drivers are those?
Jerry Thank you! They are the L8SE dustcap version.
@@pssound9749 thank u brother
How are you running those amps on stock alternator?? Or did you upgrade it? .... sounds really good even thru my iPad
unclesamthepimp We have 4 huge amps, but they run an active setup, so they don’t draw as much as an SPL system where all amps run subs full tilt.
We added another AGM battery located under the amprack and it’s absolutely fine.
Pssound... nice! Thanks for the reply. I was just wondering because I drive a 2010 mercedes e350 I was kinda worried about my bass old school PPI amp it's a PPI pc 2350 its 700×2 at 2 ohms or 1400×1 bridged at 4 ohms. It's a AB class. I'm going to try the second AGM battery in trunk!! Thanks
unclesamthepimp Don’t save on a good battery! In order to make power, you need power! Also, regular charging with a smart charger is recommended to keep them looked after.
Pssound.. thanks for the info
Playing classic love it
How much did it cost to put this system? Total
Where do you live?
@@pssound9749 Finland Peter
@@17shakil i’m not familiar with the labour over there, but this build took 33 days. Equipment you see in it was around £10k.
@@pssound9749 Thanks a lot.. 😀
How that box work sound good looks small but sound good
Jc Tejeda go to the Merc C63AMG playlist where the fabrication of the subwoofer install is explained in a separate video.
bumpin STRANGE MUSIC THO!!!
All I can say is wow
Need to tune cars with Tipper!
Haha yeah, he produces crazy music! 😃
A good system can play anything well though! 👍🔊🔊
This system SPL or SQ ?
SPL is where bass becomes a pain (for some people that is fun though), probably above 145-150dB.
This is not even close to it, but is a very capable SQ system that can hit concert levels.
@pssound9749 Good job brother, respect from Turkey 🔥
Listing with skullcandy crusher evolved is so immersiv with the bass 🤣
Sound is dead on point. Very well done
🔥🔥🔥🔥🔥
beautiful
Giovanni thank you! Many people’s favourite for many years! 🔊🔊
Looks awesome but uh...all that money spent and it just runs off an iPod/cell phone? Couldn't even hook it into the existing display and mercedes controls? Its not hard to do that
Please watch the playlist of the build and then you’ll understand what “ipod” is and why it’s different...not as shit as the OEM HU. 👍
@@pssound9749 I'm not saying its bad to have iPod/mp3 player compatibility, just as long as the OEM HU still works too. People want to retain the steering wheel controls, and console knob and display they paid for when they bought a mercedes. Otherwise it just feels like a cheap honda build
@@jcdentonunatco when this systems was planned and built in 2018 there wasn’t an option for MOST integration in this car, that didn’t cost a fortune, so the owner decided to have this Fiio DAP as alternative source to play lossless files. It’s not an iPod, not even close to it.
You would surely be happy using the OEM controls and radio, but what’s the point if you play poor quality into a system like we built? It’s a bit like having a 4K TV and playing VHS 📼, which would look bad even if you have an expensive TV. Hopefully now you see it better.
In his current car we could do MOST150 integration getting digital signal out of the OEM HU and also being able to play lossless files. It’s definitely great to have that option when it’s doable.
@@pssound9749 Strange. I have done a 2012 mercedes with MOST integration way back in 2014, it was pretty plug and play, no fancy wiring required. (I think we used mostly Audison stuff). All working with the existing fibre optic connection. That's great that you are playing lossless audio on the Fiio, but you can do the same with the OEM HU. Its a Mercedes, it was designed for lossless audio in mind when it was engineered.
@@jcdentonunatco oh yes, what you had is MOST25, these cars are MOST150, very different story and way more expensive! If you can’t have MOST, then you’d do low level integration and go through the factory amp and that’s what we didn’t want, hence the Fiio straight into DSP.
Sounds good but why even put subs if not gonna use them, there shouldnbe way more bass than that
jeff day who doesn’t use the subs?
Why should be more bass?
and just one more thing why did u make a custom pillar mount for midbass and tweeter when you already had mid 10 cm enclosure and tweeter enclosure just above that ?
did you just make a double tweeter and double 10 cm enclosure setup or what ? is that pro or what ?
Marian Factory mid and tweeter locations are not used at all. What’s more, the whole factory system is not used at all! 😃
Those locations are not optimal acoustically to get the best sound possible for the driver, hence we built custom pillars.
good
Wow
ummm, can I have your car? thanks
Jayden Haha, yeah, me too! Talk to the owner! 😂
install seems well done but sorry, mono recording on a less than decent video and microphone rig did fully ruin the initial intent of sq demo for us thru youtube !
Аху@нно👍
Hey, where did you get that full range speaker ring screws?
TOMBSTONE LV The magic is that those are not screws, but machine bolts with proper thread....well, it’s not magic then! 😃
Hey, Mercedes is looking for you. They want their car back.
mihainede85 i’m easy to find... 🤷🏻♂️😃
the bass felt flooded
Mid bass is insane
skeet skeet bang bang
Anyone else here cause of stagsaudio on tiktok build😂
Overdone to be fair ,especially on the front near the windscreen ,not for a merc
Definitely not for everyone, but who cares if the client has to be happy with what he wanted?
@@pssound9749 agreed
Burmester’s are well enough
Just like the E220d for some people. 🤷🏻♂️