Voswitch Lighting Controller For The Jeep Gladiator
ฝัง
- เผยแพร่เมื่อ 8 พ.ย. 2022
- Voswitch Lighting Controller For The Jeep Gladiator. My new favorite Jeep Gladiator Mod!
Now Sponsored by Pedal Commander! Click the link below to UNLEASH the POWER of your JEEP! 36 AWESOME settings!
👇👇👇👇👇👇👇👇👇👇👇
sdqk.me/0mHHwmPW/eovbtq8d
DO NOT CLICK: / robmotivejt
#jeepgladiator #gladiator #voswitch
@voswitch
🔧🔧🔧🔧GREAT THINGS FOR THE JEEP GLADIATOR🔧🔧🔧🔧
(COMMISSIONS EARNED)
AS AN AMAZON ASSOCIATE I EARN FROM QUALIFYING PURCHASES
▼▼▼▼▼▼▼▼▼▼▼▼▼ ▼▼▼▼▼▼▼▼▼▼▼▼
Voswitch Controller #AD: Voswitch JL400 Grab Handle Switch Panel for Jeep Wrangler JL 2018-current and Gladiator 2020-current
amzn.to/3SFTfSc
BED MAT#AD: SMARTLINER All Weather Custom Fit 5 ft Rugged Bed Mat Compatible with 2020-2023 Jeep Gladiator
amzn.to/3sESQV6
FLOOR MATS #AD: Jeep 2020 Gladiator All Weather Floor Mats Red Lettering OEM Mopar
amzn.to/3uSfaxq
DOOR SILL PROTECTORS #AD: Mopar Jeep Gladiator Door Sill Guards OEM
amzn.to/3gTm4ds
TONNEAU COVER #AD: Tyger Auto T3 Soft Tri-Fold Truck Bed Tonneau Cover Compatible with 2020-2022 Jeep Gladiator (JT) | TG-BC3J1060
amzn.to/3BtADhC
SEAT GAP FILLER #ad: Drop Stop - The Original Patented Car Seat Gap Filler (AS SEEN ON Shark Tank) - Set of 2 and Slide Free Pad and Light
amzn.to/3sIHKPe
SHORT ANTENNA#AD: Rydonair Antenna Compatible with Jeep Wrangler JK JKU JL JLU Rubicon Sahara (2007-2022) | 13 inches Flexible Rubber Antenna Replacement | Designed for Optimized FM/AM Reception
amzn.to/3uWQ7cy
DOOR LATCH COVERS #AD: Voodonala for JL Door Lock Cover Buckle Decor Trim for 2018-2021 Jeep Wrangler JL JLU, for Jeep Gladiator JT 2020 2021, ABS Exterior Accessories, 6PAC
HTTPS://AMZN.TO/3CPFEDX
NO DRILL HOOD STRUTS #AD: RIVAL 2A.ST.2702.1 HOOD LIFT STRUTS COMPATIBLE WITH JEEP WRANGLER JL 2018 2019 2020 2021 JEEP GLADIATOR 2020 2021 BUILD ON STABILUS BLACK STRUTS SET OF 2
amzn.to/3gNxRKx
SUNSHADE #AD: SPIDERWEBSHADE Compatible with Jeep Gladiator Mesh Shade Top Sunshade UV Protection Accessory USA Made for Your JT 4-Door (2018 - current) in Black
amzn.to/3sKewPO
ROLLBAR GRAB HANDLES #AD: Savadicar 4 x Roll Bar Grab Handles Grip Handle for Jeep Wrangler YJ TJ JK JL & Gladiator JT 1987-2021, Interior Accessories, Black & Red
amzn.to/36l2l4w
📸 📸 📸 📸 📸 📸 📸 📸 📸 📸 📸 📸 📸 📸 📸 📸
CLICK HERE TO VISIT MY TACOMA (ROBMOTIVE) CHANNEL: / robmotive
CLICK HERE TO VISIT MY NEW MINI TRUCK CHANNEL (robmotivemt): / robmotivemt
↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎↘︎
FOLLOW ME ON INSTAGRAM @ROBMOTIVEJT
☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️
__DISCLAIMER: DUE TO FACTORS BEYOND THE CONTROL OF ROBMOTIVEJT, I CANNOT GUARANTEE AGAINST IMPROPER USE OR UNAUTHORIZED MODIFICATIONS OF THIS INFORMATION. I ASSUME NO LIABILITY FOR PROPERTY DAMAGE OR INJURY INCURRED AS A RESULT OF ANY OF THE INFORMATION CONTAINED IN THIS VIDEO. USE THIS INFORMATION AT YOUR OWN RISK. I RECOMMEND SAFE PRACTICES WHEN WORKING ON VEHICLES AND OR WITH TOOLS AND PRODUCTS SEEN OR IMPLIED IN THIS VIDEO. DUE TO FACTORS BEYOND MY CONTROL, NO INFORMATION CONTAINED IN THIS VIDEO SHALL CREATE ANY EXPRESSED OR IMPLIED WARRANTY OR GUARANTEE OF ANY PARTICULAR RESULT. ANY INJURY, DAMAGE, OR LOSS THAT MAY RESULT FROM IMPROPER USE OF PRODUCTS, TOOLS, EQUIPMENT OR FROM THE INFORMATION CONTAINED IN THIS VIDEO IS THE SOLE RESPONSIBILITY OF THE USER.
THANKS FOR WATCHING ROBMOTIVEJT
AS AN AMAZON ASSOCIATE I EARN FROM QUALIFYING PURCHASES - ยานยนต์และพาหนะ
Hey Rob. No smoke! That’s funny. 🙂
Lol! It would have been a bummer😬
Very cool install, Rob, looks stealthy, high-end custom, plus it's in the line of sight when driving, makes more sense than under the steering wheel.
All positives so far. Works great too👍
Fantastic switch just installed the 120 which is a 12 switch setup in my 22 gladiator looks factory
Aloha and good 👍 evening 🌙🌚 Rob. This is a fantastic installation that requires patience, tact, and steadiness. This installation looks 👀 awesome as you have many features at the tip of the grab handle. Awesome ✨ video 📼 Rob.🤜🤛📼🐕🐶🤙🎓💪👀🤲🌟🔅🔍👍😎🤠😇💰🤓🏡😄🙌👐⛅
Looks awesome rob 🎉
Thanks👍
I used your video to help me install this but I did it through the windshield. Great video, thanks!
Smart move!! Thanks for watching 👍
That is a really sweet setup Rob.
IT’s too awesome! Love the look👍
That is slick!
It’s pretty cool👍
Thanks for the helpful vid! When you unbolted the Grab handle & trim- were there also clips holding it in place? Also, what do you use to fill the extra space in the firewall grommet that you drilled out? The Voswitch JL400 is by far one of the sleekest switch setups I have seen and I can't wait to install mine.
Rob. That is so sweet. The tacome needs a grab handle with that. Heck all pickups need it.
It’s too cool. What a great product 👍
Nice! I literally just installed the same thing on mine. The grab handle location is much better than behind the shifter. Don't forget to clean your MAF Sensor (for the rough idle). 😁
@ geofftentwo: Agreed! I’m not a fan of having to look around or reach around the shifter. If you have the factory auxiliary switches there already, the benefits of being to set the switch from momentary to toggle is neat, but I like the JL400’s location much better.
Hoping for the 2024 grab handle switch kit
It’s a great setup.
I got one love it
It’s awesome 👍
Like it, going to buy one.
I’m so glad I found this. So much better than the aux switch install IMO👍
I like it pretty neat
It’s too cool. Love that it’s integrated into the grab handle👍
That is quite a switch controller. The price is great and it is much simpler to set up vs the dash mount type. 👍
Absolutely! So simple and looks great too👍
Awesome mod
Pretty cool👍
Looks sweet. If I didn't have the factory aux switches, I'd jump on those too.
It’s pretty cool👍
Hey Rob, I am installing my Voswitch JL800 in my 2023 Gladiator Sport. I remember one video somewhere that recommended connecting the red control wire to fuse F53, Wireless Speaker. However, I just discovered that the people who installed my winch used that fuse already. My question is: Does it matter what fuse I use? If I find any key-powered fuse, can I just use any one of them? OR should I splice my control wire to the winch control wire to share the connection to Wireless Speaker? I like your comments to not overthink this install. It's incredibly easy to install! I just need to be sure I don't cause future problems by using the wrong fuse that works with the key. (I know it's keyless, so I guess I should say "Accessory-activated" fuse).
Here’s my install video: th-cam.com/video/tIsmDtKY0Os/w-d-xo.htmlsi=EmjtQtnx6sR4PNF7
Good choice! I like the switch location and looks with your installation. I went with the 6 switch Voswitch and to be honest with the low installation location behind the shifter and with these old eyes I have a hard time reading the labels on the switches. Nice install.
Thanks👍
I meant is it the JL 400 switch kit that comes with the switch for Harry the grab handle set up?
See the video description 👍
HA this video is exactly what Ive been wanting to see! I just ordered one of these to go with some Diode Dynamics pod lights. going to be 4 of them to wire up (to two switches). Have no idea what Im doing but hey, its only a 60k vehicle right? lol
Lol! I recommend you watch this video over and over and over....😂
I don't do anything comment wise much but this has really helped me decide to try this product. I'm just on the fence about the 8 or the 4 switch version? Thanks and they should sponsor you.
Ya hear that Voswitch? Email me😂
Awesome product. What size bolt did you use for the bracket to bolt to the body?looks like you used 1 OE bolt.
No idea🤔🤔
What cable puller is that.
Great video! I helped my cousin install this
over the weekend. We got power to the switch and everything but we weren’t able to turn on his Baja design pods once they were connected. Everything was connected correctly. Any suggestions? Thank you
Double check your wiring. No reason it shouldn't work.
Seen you had a off color bolt in the box under the hood. Did the holes line up or did you have to drill a new hole for the bracket.
I did not drill any holes.
Can you shoot me the part # or model # of the Voswitch unit? I want yo get it is it the JL 100 unit? Thanks🤙Harry in Fl.
If you add even more than you currently have switches for, you can buy the Jeep aux switches to put in, the wiring is already there for it...
Nope, the wiring was not there.
@@robmotiveplus did your mother buy it used, or new?
The wiring should already be there, unless someone took it out...very odd
@ Phelan DeLuna: Sorry, but Mopar/Jeep does NOT run include a wiring harness for the factory auxiliary switch plate unless you bought the factory auxiliary switch option. If you choose to install Mopar auxiliary switch package yourself, not only do you have to run the harness, but you have to actually add straggler pin wires to existing connectors. After all that is done, the vehicle has to be reflashed to recognize the factory auxiliary switch plate.
@@trashrelocationengineer6472 the wiring in the front at the battery is there.
Yes, you have to buy the switches and harness for inside and connect it
@ Phelan DeLuna: Ah. Now I see the source of confusion. Yes, there is a fusebox and wiring near the battery, however, none of it pertains to the factory auxiliary switches. All of the factory switch-specific wiring is in the harness that is not in the vehicle unless that package is ordered.. In effect, the addition wiring, cost and effort to install the factory auxiliary switches is actually greater than the Voswitch.
Skipped right over the part that would’ve explained how to remove the plastic grab handle on the a pillar….
Well why did you do that?