Dirt Bike Brake Bleeding Tips
ฝัง
- เผยแพร่เมื่อ 16 ก.พ. 2024
- Today we go in depth with brake bleeding on a brand new brake line from start to finish.
If you shop online at Rocky Mountain ATV/MC please click this affiliate link to shop in the future. There is no extra cost & it helps support our channel. Remember to click this link RM ATV/MC -DBTV Shopping each time you need to go there to shop.
www.rockymountainatvmc.com/l/...
Jay Clark/Dirt Bike TV has been around the Dirt Bike industry for thirty years and is always looking to learn and help others do so as well. Give a follow or drop an email if you have any questions or comments.
Thanks for Listening! You can watch the full episode on our TH-cam. / dirtbiketv
Instagram: @dirtbiketv1
Facebook: / dirt.bike.tv
Website: dirtbiketv1.com
Email: jay@dirtbiketv1.com
Thanks for watching, don’t forget to share and subscribe. - บันเทิง
Brilliant. Love your tutorials. Ive always struggled with front breaks. Now thanks to you I should be able to get them much better. Cheers from New Zealand 😊
Great job , thanks you so much for providing quality videos with your knowledge
Another great tech video!
Great video! On Facebook groups I've seen a lot of people struggle with bleeding.
A trick that I've used on new lines is one of those handheld back massagers hold it against the line and it vibrates those bubbles off the sides breaking the surface tension and they will rise up to the master cylinder.
Thats a great idea!
I appreciate your channel.
Another great video
I always chuck those Phillips screws and replace them with Allen or Torx heads.
I think that is a good idea for just about any Phillips heads. They were first made for faster production over the straight blade screwdriver because the bit would "self center". But they are "ramped" and can be damaged so much easier than the straight wall Allen and Torx.
Maybe they should be reserved for china crap by law. :)
I keep a re-usable ziptie on my bars all the time, for handy use on the trail, or easy to grab and clamp the lever on overnight to take care of the Tiny Bubbles!
Everyone NEEDS to get a JIS screwdriver. You’ll never strip a Phillips head again
I swear even with a screw driver they are still so easy to waller out the head of screw
@@jaredgordon2798 you must have a JIS specific screwdriver.
I guess I didn't know a jis driver was a thing I'll have to check ot out
Thanks for sharing! Your video is the only one that I've seen to where the brake lever is held in for air bleeding. I pneumatic air bled my system w/o touching the hand brake or foot pedal. Is one way better than the other? Also, wouldn't the air bubbles release better over night leaving MC cover off while zipped tied? Thanks again! Great Job!!
Hi cool video 01 400 mxc front brake locked up no pressure after tried doing this several times please helpp thank you !!
Any links for the pneumatic bleeder you recommend?
I challenge you to do the bleed procedure you recommend, but make a custom brake hose with clear line, so we can see the bubbles, or lack of them, in the fluid during the process. Then we can also see how effective your caliper push back and banging on the brake line is.
My wife LOVES to help me set sag 😂
The timing on this is crazy 😂
The hell? Ha I ain’t about to have that shit laying around guy 1:03
Thanks for the video. Not to be an a hole but every year of the KX125 was a piece of sh*t. The best cure for a kx125 is to buy an older yz or a new ktm
Really? Is that why they filled up the starting lines in the 80's? They produced the first lower rpm motor, that filled the starting lines across the nation in the 125 class.
Yamaha did the same thing later in the 90's.
Yea, I drink a little brake fluid once in a while.
But I can stop anytime I want!
:)
Wow it's a dirtbikes and they put the line on the bottom of the fork where you go into ruts or rocks?? That's crazy lol
The vacuum bleeder did not work for my Harley rear brake. That think has a 3" vertical loop by the swing arm pivot that is more than the suspension travel. :)
The pneumatic bleeder is a life saver. I like the last little tips at the end that just make the brake pull really firm. Tapping the cable seems silly but it really helps.
Great video and super helpful to show all the steps.
Lever needs some hawk tuah
I’ve had just as good of luck opening the cap at the top then cracking the bleeder with a hose attached, and let it gravity bleed into a cup. You’re not pumping the lever and getting a bunch of micro bubbles started by agitating the fluid so much.
Why this way over back bleeding from the start?
Why's the brake line under the fork wth 🙄
Looks luke just as much of a pain in the ass as every other way
KTM is the worst....i tried everything and still could not get it to build pressure. Thought it was a problem in reservoir...rebuilt it...nothing...bought a new used one ebay...same thing...bough china knock off an pumped up in 5 cycles...jeez
This is line abuse smacking it around lol
dear god get rid of that brake line under the caliper.
First thing I do is go get my air (pneumatic) bleeder tool and hook it up to my air compressor at 100 psi and have the brakes bled in under 1 minute (literally)...