I'm a mechanic and my wife has this car, I couldn't figure out where the starter on it was (doing it at home and not at the shop) and found this video. Gotta say, the music made me watch it all the way thru. Great work, great music, great audio. Keep at it my man!
I just replaced my starter, first I had to disconnect the wires that were in the way, I unbolted the knock sensor, I used my wife’s small fingers to get the nut back on the starter wire. In the end it all worked out OK, just a bit tricky regarding the proper wrench & socket combinations.
I would recommend the beginner kit as a bare minimum. so yes. But you shouldn't feel obligated to buy preemptively if you cant afford it. buy the tools as you need them.
Hey there! We just changed the starter on 2010. Now when we push the start button it acts like it's factory resetting evertime she tries to start it. Anything you know that we should do or didn't do?
You probably put a wire back on wrong. Or forgot to tighten up a battery cable I'm sure lol. Don't take it to the dealer.lmfao. that guy knows nothing about cars obviously
Great Work? I only watched the first couple mins so maybe he tells you later...but he starts working on the starter without giving you the first clue where its located.
Before the 2 minute mark you can see the catalytic converter in the frame. That should be a good reference. I'm just standing at the front of the car looking down at the catalytic converter.
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
![ค้างคืนโรงเก็บกระสวยอวกาศร้างกลางทะเลทราย [Around The World Ep. 3]](http://i.ytimg.com/vi/E5bWZQhABJE/mqdefault.jpg)
I'm a mechanic and my wife has this car, I couldn't figure out where the starter on it was (doing it at home and not at the shop) and found this video. Gotta say, the music made me watch it all the way thru. Great work, great music, great audio. Keep at it my man!
Thank you! Subscribe please!
9:53
What an excellent video, perfectly explained, music was awesome what a peaceful training video, thank you for helping me and so many others
Thanks for watching! Like and subscribe!
I just replaced my starter, first I had to disconnect the wires that were in the way, I unbolted the knock sensor, I used my wife’s small fingers to get the nut back on the starter wire. In the end it all worked out OK, just a bit tricky regarding the proper wrench & socket combinations.
Small hands help
Love the music and very helpful advice, BUT I think if there was some swearing curse words it would of gone faster.
I'll have to try that next time
Don't lie. That happened while you had the camera off and you were pulling that connector apart.
@@YourSoundStudios lol
Ok see u did it so much better I’ll let u kno how it went thanks for the video
update?
love thebsomewhat triumphant music building
Thank you! Like and subscribe please!
Do you need every tool listed in the beginner kit for this job
I would recommend the beginner kit as a bare minimum. so yes. But you shouldn't feel obligated to buy preemptively if you cant afford it. buy the tools as you need them.
Thanks.Great job...
Thanks for watching! Like and subscribe!
Do you have a video of a 2015 Buick spark plug change
Maybe someday! Like and subscribe!
Good Video you are right dumb design thanks for the video
no problem! like and subscribe!
Hey there! We just changed the starter on 2010. Now when we push the start button it acts like it's factory resetting evertime she tries to start it. Anything you know that we should do or didn't do?
Take it to a dealer
You probably put a wire back on wrong. Or forgot to tighten up a battery cable I'm sure lol. Don't take it to the dealer.lmfao. that guy knows nothing about cars obviously
I'm about to on my 2011 3.6l v6. Did you take the exhaust manifold off or do everything from the bottom?
From the bottom
@@TheTH-camMechanic thanks
Hey man what year was this lacrosse
2016 I believe
Great Work? I only watched the first couple mins so maybe he tells you later...but he starts working on the starter without giving you the first clue where its located.
Before the 2 minute mark you can see the catalytic converter in the frame. That should be a good reference. I'm just standing at the front of the car looking down at the catalytic converter.
Its alot tougher whit the motor installed lol. I had to do everything from the bottom
Yeah I had to do everything from the bottom. Thanks for watching! Like and subscribe!
It’s a 3.6 not a 3.0
Damn it only took two years for someone to mention that. Thank you.
Bro you lyin. Mines don’t look like that
show me
@@TheTH-camMechanichow?
Post a video
You might have to take off your catalytic converter if it’s got a heat shield and 3 exhaust parts you gotta take it off and have plenty of sockets
Wtf is up witht hat creepy ass piano music in the background lmfao. Weird
Make a video when you do your starter and let me know and I'll come watch it.