Quick Tip: How To Remove Light Rust From Your Firearm
ฝัง
- เผยแพร่เมื่อ 24 มี.ค. 2024
- Hi, I'm Steve with Brownells. Today, I want to share a quick tip about removing light rust from your firearm. It's something that many of us encounter, especially after hunting season or the summer months. Your gun might get exposed to moisture, get a bit of blood or even Coca-Cola on it, and before you know it, there's a layer of that nasty orange rust.
So, what do you do when you spot some rust? Let's look at a couple of examples I've got here. First, we have a barrel with a very light patina starting to form. For something this faint, all you really need is a bit of oil and a rag. Just apply some oil to the rag-it doesn't matter much what kind of oil, Hoppes will do-and give it a gentle wipe. If the rust is just on the surface, that's often enough to clean it off.
Now, if you're dealing with more serious rust, something that's really started to build up and turn orange, you'll need to be a bit more aggressive. That's where steel wool comes in. I use 4-0 steel wool because it's fine enough not to harm the bluing on your firearm but tough enough to get rid of the rust. You'll want to wet it with a bit of Hoppes or a similar product, which acts more as a lubricant in this case. Rub it gently on the affected area, and you'll start to see the rust lifting off.
Once you've worked on it for a bit, take a clean cloth and wipe down the area to see how much progress you've made. You might notice some pitting that won't go away-that's permanent damage that can only be fixed with professional refinishing. However, the rust itself should be gone.
If you've cleaned one rusty spot, it's a good idea to go over the entire gun with the steel wool and oil, as other areas might also be starting to rust. After you've cleaned it off, take some good gun oil, give it a final wipe down, and your firearm should be in great shape for the next season.
Remember, prevention is key. Don't store your guns in cases if they've been exposed to moisture, and be mindful of where you bring them inside during the winter. Moisture can condense on the metal and cause rust if not addressed properly.
Removing rust from your firearm is really quite simple, and there are good ways to both prevent and get rid of it. If you have any questions about rust removal or prevention, feel free to reach out or leave a comment below. Thanks for watching, and I'll see you next time. - แนวปฏิบัติและการใช้ชีวิต
The love the inexhaustible walking encyclopedias of gun knowledge you have at Brownells. Well done once again.
There's another Brownells video very similar to this one with Steve's 11 year old younger brother lol.
Not a rust issue, but my dad taught me about using steam to take dents out of wood stocks. If ya'll haven't talked about this sort of thing, it might make a good episode. Thanks for this one!
It works pretty well.
I just use a regular household iron and a cloth soaked in water for larger dents, and a soldering iron with a soaked cleaning patch for smaller ones.
I have a iron beside my bench I've used for years , I love to take a beat stock and bring it back to the glory it once had
Mark Novak has a few videos where he shows that. Rust blueing, too... you can convert that orange rust back into black iron oxide with steam or boiling water, and then clean it up with steel wool.
The iron technique is actually what they teach if you take classes at SDI. I was surprised it worked! We had to make a wooden stock from a wooden template and the iron on wood dents was a lifesaver for that project!
What about the copper penny or copper wool?
I like that there is what looks like an AT4 just chilling in the safe.
😅
In olden days, Cosmoline was used as a coating for storage of firearms to prevent rust.
Excellent video! Thank you.
simple video, but good advice. this sort of simple advice and tips is why I love this channel. It may be well known to some, but not all.
Great and informative video. I have to do this exact thing with my mom’s .22 later. It’s like you guys are prophetic.
A old copper penny and a bit of oil works pretty good.
How did that 1100 turn out 11 yrs ago? Thank you Steve. For all the years of advice and education. I'm using your video to teach someone to do it the right way. I perchased four long guns months back off a neighbor. All bought in 1970s Az. Taken to Alaska and forgotten until 2012. Winchester 94. 30-30 in original box with Red string tags still attached. Judging from the loading gate and feed ramp this rifle has never had a round outside the factory in it. Also a Remington BDL 300 win mag. In box with tags. Scuffed up stock but not used. A Westernfeild 12ga M550AB0. 30IN Full choke barrel. I immediately recognized as a Mossberg action sure enough the parts are interchangeable. Very lite serface rust on the three. The four was definitely used and put away wet. Found it on bare tile floor under a pu truck load of old clothing. Fortunately nothing bent or broken but definitely scuffed up gouged up. Had a lite chain under it that pressed into the pump and stock. If removed may cause more damage. So trimmed dangling chain off. May leave it as a conversation starter and reminder as it functions great and shoots straight as an arrow. Keep up the great work. My student says you have a new subscriber.
Seems simple - thanks for the tip.
Thanks
Thank you for sharing!!!
When a customer would allow a weapon to badly rust through sheer neglect, then bringing it to me for refinishing, I was always amazed how ignorant some people were. Especially when they "helped " by attacking the rust with sandpaper prior to coming to my shop. I'd then tell them that thanks to their efforts, the cost of refinishing just tripled. 😠
I have used some 4-O steel wool, lightly on guns and knives, with good success. Oil after use.
I've uses a bronze brush or a Chore Boy copper scouring pad with oil.
You know I was just needing this exact video as a new gun owner
I think one of the first Brownells videos I watched was of you teaching some removal of rust from a shotgun. Awesome video. And I'm not gonna lie that first vid was good but it got me kinda sleepy 😅
Ive been calling it "hops" all this time.
Wouldn't worry too much about it. It was pronounced Hops by those whom used it and those whom sold up until not that very long ago. I put it in the same category as Jagwire vs. Jag u are. Or foyer vs. foyay or even the ever popular, mini ball is. Minyay.
If it matters to somebody, they need to get a life. Happy shooting!
Many left off the "e" over the years. I've been calling it "Hoppys" over 60 years, though.
Hoppe's just as it is spelled. Capital "E" sound. That is why there is an "E" in the name. {How did your post get any "likes"? 🤕
@@gusloader123oh shush, Guslo Ader
I’m not an English scholar but my mother is. She is 83 and I am 62. She STILL corrects my grammar! Annoying, but appreciated none the less. I lived abroad for decades and learned several languages so I feel I have some pertinent experience with the way we mispronounce things, especially foreign words and names. Names are weird but Americans tend to screw up the pronunciation of anything unfamiliar. I think the double “P” in Hoppe’s make the “O” a short vowel and the apostrophe simply shows possession of the recipe by the family Hoppe. If you want to pronounce it like Hoppies, go ahead, but you sound like a hick. BTW, I’m an Infantry vet and a staunch 2A guy so don’t start with the nerdy insult BS. I’ll go toe to toe…
thanks
Hunting in the northern adirondacks in snow etc. Let's just say I wipe them down when putting it back in the case at the truck. Get home take them out put them by heater vent for a bit. Than heavy coat of oil and wipe off excess.
True words of wisdom!
Thanks.
Also watched a guy use oil and an old copper pre 81 penny to take rust off a gun barrel too. 👍
I've got three old saws that I'm going to try using copper sheet metal, I'm looking for a particular patina
My grandfather taught everyone to use motor oil and soft steel wood. That method has always worked 👍
3-1 and a cloth works good as well
I like Ballistol oil. Frog 🐸 Lube is great too.
Blue wonder with 0000 steel wool is a good ootion as well. A good carbon, lead, and coopper fowling remover as well.
I have a damp cloth with mineral oil I've used for years to wipe my rifles and pistols down after I use them and then don't touch them till there back out , mineral oil is cheep at wally world and its always protected my arms
Thank you, will try this.
I keep desiccant packets from every package we get and my wife laughs and has turned into a game where she throws them at me LOL, and they all end up in the gun safe or ammo storage places lol it helps a lot.
If they are "used" up won't you be actually adding moisture? I get the type where has color beads...
I have used that stainless steel wool for a lot of years now. I'm surprised that Steve didn't mention it, since I got it from Brownell's.
He made a video about removing rust about a decade and a half ago and he used it then too
Steve mentions using 0000 steel wool at 1:23.
@@redcat9436
The stuff I bought is not regular steel wool, but rather STAINLESS steel wool. Brownells advertises it for rust removal without damaging the blueing.
I once got a good deal on a 1963 manufactured double-trigger Steyr-Mannlicher 270 bolt action rifle because the previous owner's wife poured Coca-cola over it while it sat in a soft gun case. The resulting pitting still has me pondering the wisdom of drinking the stuff every day.
Those fuzzy soft case are thebwort at attracting water
will desiccant packets in your case help prevent rusting if you live in a humid area?
Is Hoppe's #9 a rust preventative/ corrosion inhibitor?
There has been a great deal of research in how the Vikings kept their ship spikes from rusting the ocean. What they found is the iron was quenched in whale oil. Someone tested all the oils to see if there was another oil with the same bonding to iron, he found Olive Oil. It is time to start testing this on gun barrels at normal bluing temps.
Good idea , I've used mineral oil for years with no rusting issues
Extra Virgin or regular?
Only extra virgin is good enough for my firearms
@@dragonsofthunder The closest to seal or whale, whichever that is.
Modern black powder shooters have been using olive oil in place of bear grease. I think they call it sweet oil.
Always be careful with steel wool. The tiny steel fibers get into everything. They will stick to anything oily or sticky or magnetic. Especially on things you don't want them on for some reason.
BIG 45 FRONTIER METAL CLEANER
I heard some people use spray car wax to prevent rust or wipe the gun down with an oily rag gun oil on it
There are products out there specifically made to leave a light film on guns for long term storage. I believe that Birchwood Casey makes a product called Barricade that works along those lines.
cheaper way is to get you a wax commode ring and use a hairdryer to warm the metal and wood first and apply just like waxing your car...great for long term storage
Use a #2 lead pencil directly on the rust spots wiping the area with a dry cloth until all the rust is removed .
I've got a Wather PK380 and I just find out that it has rust on the slider and need to know how can I get it off and make it look like new again?
Did you ever use the aluminum foil from the C-rat John Wayne bars to remove the light rust? Of course break free was involved as well.
0000 steel wool will absolutely fade bluing. Ask me how I know. If you’re doing a large area it might not be as noticeable but if on a small area, with pristine bluing right next to it, you WILL notice even after a very quick rubbing.
You actually sell it on the website, is it better than hardware store steel wool?
I have a 24 year old 870 Express, it rust's just looking at it.
Ended up just painting it, problem fixed.
"Nevrdull" works very good for taking rust off firearms.
Any oil will do, but CLP is best. OOOO steel wool will work, but OOOO brass wool is better. Don’t rub too hard, or you can remove bluing you don’t want to remove. If your gun gets wet on a hunt, remove the action from the stock at the first opportunity and wipe off the moisture and wipe down with oil or a rust preventative like Birchwood-Casey Barricade or equivalent from Remington. Hunting gun bores don’t need to be cleaned often, but at least run an oil soaked patch down the bore followed by a dry patch at the end of the season. Then take the pressure off your firing pin spring of bolt guns before putting away until next year.
Hello Steve from Brownell's. Question: Are you using Hoppe's No. 9 solvent in the video or Hoppe's Gun oil? I have used the solvent before and it took off some bluing off from a gun.
Oil
What if you have rust/patina on you nickel plated finish?
can i use olive oil?
Is that a 9mm at-4 practice launcher in the safe behind the presenter?
You time these to coincide with my problems don’t you? Suss
They have a team of Brownell's gremlins checking our closets. Haha
What do you do with a stainless steel 1911 that won’t stop taking on a light rust no matter what you do or how you oil it?
Metal polish like mother or Maguires metal polish.
A little oil and a lead pencil dose pretty good.
You can do a rattle can job on your rifles to help protect them
Why is the gun community the only place that says rattle can? The rest of the world says spray paint.
@@timrobinson6573 The world does not need to conform to your perception of reality, Mr. Robinson.
Now kindly move along my friend.
I think I’d rather live with a little rust on my Winchester 94 than what it would look like with spray paint
My green AR never rusts. Yes, I used Rustolium!
Put Ballistol on it; let it stand overnight, and wipe rust off.
I thought it was Steve that showed me the trick with the pre-certain year penny
I believe its pre-1982. pennies after that point are almost entirely zinc rather than copper.
@superrad1659 thank you, I have one in my cleaning kit, just couldn't remember the year lol
@@psycopaintball22 👍
Pre 1982, we posted it in a short Caleb did a few years ago.
Forox steel wool. Noted.
IMPORTANT!!! Only use 0000 steel wool
"What you call patina is oil-soaked rust." - Mark Novak
What about the penny trick?
I payed 40 Pesos to see a woman in Tijuana do the penny trick.
My piece gets a little bit from sweat while carrying.
I prefer to boil smaller items. Converts the rust then just use steel wool to remove it.
Popsicle stick and WD40 works pretty well.
What about heavy rust from black powder on the inside because my grenade launcher is pretty rusty
Bronze bore brush and lard. Must be pig lard and slather it all over the grenades too.
Steve, Big 45 removes rust but NOT bluing. It is better than steel wool.
Big45 is far far far better than any steel wool. Big 45 is the only thing used for rust removal in the shop I work at.
wear rubber or nitrile gloves when working with Kroil. It's good stuff, but it's not good to get it in contact with your skin.
My gun gets belly sweat on it😭🤣
When hunting in cold I don't bring my rifle indoors
I wipe down my rifle once i get home even if I don't give it a proper cleaning. Problem prevented. Green soft scouring pads can also do wonders without being too abrasive.
What do you wipe them down with?
What do you wipe it down with?
It's why you buy stainless , removing rust and re-bluing gets old. For lots of rust soak in lime kool aid overnight , then wipe off, and oil, done..
Stainless isn’t rust proof. And I’ve yet to find a good over-under or side-by-side shotgun made in stainless. And to be honest, I wouldn’t want one anyway. Blued guns aren’t for everyone. They take more time and care to maintain, which is part of the allure and enjoyment
Lime kool aid= artificial flavoring, dye, water, and sugar. Yeah, that sounds like a brilliant idea.
Like many of the tips this goes beyond guns.
I live near the ocean and the salt in the air is killing me !
Glocks rule sigs drool, sig p365 literally drools rust
What?
What are you doing to your Sig bro?
Okay fan boi
This is why I spray paint my firearms. Years of spending more time and effort removing rust every year than it takes me to remove a rattle can paint job from a gun.
I know some guns you won’t paint, for those I HIGHLY recommend one of those silicone gun socks. That’s been a lifesaver.
Simonize.
Keep 'em oily.
A dremal.
I don't know that there is a firearm issue that can't be fixed with a dremal.
( ͡° ͜ʖ ͡°)
a little steam and that light rust will turn back into bluing...a clothing steamer works wonders... putting oil on it only coats the outside rust while in under it keeps on rusting...bright spots will happen using just oil and steel wool one would be better off using a pure copper penny to remove the rust...
If you are proactive, wipe it down at the end of each day of using it, I have not had rust on my firearms for decades…..
::Gazes at Dan Wesson and their hammers with a side eye stare::
IYKYK.
Stay classy my friends.
Do you have anything original to say or do you just communicate in internet jokes that someone else came up with?
@@timrobinson6573 Seek professional help, Mr. Robinson. You seem to be rambling incoherently.
We have never met before, nor have we spoken to each other. Not to mention, I have never said this comment in the past as you seem to think. Yet you presume to insinuate that I somehow pilfered something from someone?
Clearly you are trolling the comments section purely for harassment.
Move along child. The adults are talking.
Take care my friend.
@@BertShackleforddropped your fedora
You can prevent alot of surface rust by using a more modern CLP type oil instead of using grandpas Hoppes.
Sure
most gun users know exactly how to get simple rust off a gun. This is a boring video and not helpful for the serious Men..Why don’t you show us some videos “where you are not playing it safe with simple gun repairs”… show us some helpful videos.
Ballistol has always worked good for me
Clean it in between steel wool use / as the rust starts breaking loose , with a rag using laquer thinner . It will take ALOT of the junk off the surface and reduce any undue abrasion . Final clean with the laquer thinner, then oil heavy .