⚡Make Your 2024 Bagger Sound Like A Beast!
ฝัง
- เผยแพร่เมื่อ 4 พ.ค. 2024
- Get Yours Here - shorturl.at/aTUW3
Dont forget to check out Advanblacks Color Matched Parts for your 2024 Touring Model here - www.advanblack.com/
Upgrade your 2024 Harley-Davidson Touring with the throaty rumble of TAB Performance BAM Sticks! In this video, Steve guides you through the installation process, showing you how to remove your stock mufflers and install the new BAM Sticks for a meaner look and sound. Let your Harley unleash its inner beast!
Tools Used In This Video
Milwaukee M12 Ratchet - amzn.to/4a7sKOg
Master Mechanic Tool Case - amzn.to/3wi8MTl
FT LB Torque Wrench - amzn.to/3UMyk3h
Rubber Strap Wrench - amzn.to/3QvkYac
#sikbaggers #advanblack #tabperformance
Steve's Favorite Motorcycle Must-Have Tools!
Hexagon LED Ceiling Lighting - amzn.to/48rwtp7
Master Hex/Torx Set - amzn.to/43imOAg
Swivel Head Ratchet - amzn.to/3MYeMEw
Milwaukee M12 Ratchet - amzn.to/3VSR6W4
M12 Battery - amzn.to/3gweokl
M12 Charger - amzn.to/3Srrb53
Ratcheting Wrenches (Metric) - amzn.to/3CQanyS
Ratcheting Wrenches (SAE) - amzn.to/3Tt6iaY
Blue Medium Loctite (Your Bike's Best Friend) - amzn.to/3gwdK6p
FT LB Torque - amzn.to/3VON5SH
IN LB Torque - amzn.to/3F4wCUA
Vise Grip Plier Set - amzn.to/3TYZUs0
Motorcycle Funnel Set - amzn.to/3sP9HFz
Belt Tension Gauge - amzn.to/3FiiXco
Noco Boost Plus Power Bank/Jumper - amzn.to/3W1squO
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
#sikbaggers #harleydavidson
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music is Licensed Through www.epidemicsound.com
VIDEO DISCLAIMER:
This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch. - ยานยนต์และพาหนะ
Thank you all for watching our video on the Tab Performance Slip Ons for the 2024 Halrey Davidson Touring Model! Your support fuels our passion for motorcycles, and we can't wait to bring you more exciting content soon. Be safe and keep your knees in the breeze!
Awesome video! I went with TAB Performance BAM sticks for my 2024 Road Glide and they do sound great. They also appear to be very well made.
yes sir...ive been running tabs for over 5 years now and love them..never once had an issue with them and the best part is the powder coating holds up and doesnt fade on the black ones.
Have tab header pipe with tab 4.5 zombies - best combo out there!
agreed 100%!!
Great video Steve. Have changed mufflers many times but just had to watch your video anyway. Keep up the good work 🤟🤟🤟
Thank you sir...much appreciated!!
Thank you for making the difficult look easy.
Thx Steve!
Doc AJ
Youre very welcome Doc..much appreciated.
Sound look good from TAB Performance. Solid pipes.
Thanks Steve for the Video 💯
Yes they are...5 years strong on my RG and still look brand new...love them ..thanks for checking it out!
they sound perfect great video
Yes sir...woke her up a little
Love my 4.5 bam sticks. Got the zombie baffles paired with the DK customs thunder torque inserts and it’s amazing! Good job Steve!
very nice! Thanks for checking it out wayne!
Thx for the tip and reminders
yes sir, glad to help!
Steve again I wanted to tell you thanks for the help on backrest. When I went to test drive the new ones I said they sounded like a moped most definitely not like a Harley
haha yeah man...super quite...and youre welcome man...glad to help
Hey Steve love that color.i have the Tab Performance Zombie baffles on my 2023 Street Glide Special with Stage 2 torque cam .It sounds awesome!!
Thanks for the video
Thank you bro..im glad i got this whiskey fire...shell look great all blacked out..lots of ideas for this one!
outstanding Brother!!
thank you bro!
Another cool video 👍
Have the same Husky tool box/work table nice quality for price two years ago
we got it on sale last year and its been a great portable work bench.
This is Awesome I can't wait to install on my 2024
yes sir..they sound bad ass!
Absolutely great videos Steve, and thank you for all the content. I love the tab bam sticks and found another option that works for me, I figured I would share. I have the 4.5 Bam Sticks, I run the zombie baffle on the clutch side and the 2.5 on the brake side. That gives another level of volume between the 2 baffles and helps to hold the back pressure a bit to keep the low end torque. I am running this set up on the 2019 Street Glide special with HD torque cam, Jackpot 2-1-2 header, Arlen Ness high flow AC, and an auto tune session on the Powervision. She is not built for crazy speed, just some sound and some get around! 👍😎
nice! Ive heard of a few people running different baffles in each side....id be interested in hearing that for sure.
Love my Tabs have them on both bikes
Nice!! Thanks for checking it out !
Sounds pretty good w stock head pipe!
She will really sing once we change that! Coming soon!
very good vidro ty
thank you bro
I put 4.5 Bam Sticks with medium baffle on my 2021 CVO Road Glide they sound great! I installed a 468 cam and it is a game changer.
hell yeah thats a great combo!
@@sikbaggers 114 hp and 136 tq no tuner just had them throw a tune on the dynojet and I'm good with it! You have a great channel man...
Love the Bam steaks, especially the big fat ones that they’re making now 4 1/2 or 5 incher
yes we have the 5" 50 cals on the rg...we have a video on that as well...super loud and just mean looking!
Love these. I got the zombies. Upgrading the air filter soon. Again Harley wants to charge big bucks for a screaming eagle tuner and install even though it’s plug n play. I’ll filter through your videos to see if there’s a tuner vid for air and slip ons only. Love the videos man. Thanks for taking the time to do these.
Trust me - installing the SE tuner takes about 20-30 minutes and is super easy.
The se is pretty straight forward to install and its a basic canned map..itll get the bike in the ball park..unless you have it dyno tuned any tuner out there will give you a basic map for your set up..I personally use powervision.
Great video Steve! Have enjoyed a lot of your videos for several years now. One question; the saddlebag stand you have on the floor (shown at about 4:48 min into this video); what brand is it? Looks very nice to have for safe keeping of the saddlebags while working on the bike! Best regards from Norway, Jan Inge
Thank you! I used to have the home made ones and I even did a video on it using pvc pipe and foam...they just take up tons of floor room when they are not being used. These are actually from Harley. I can fold them up and hang them on the wall when not in use.. here is the link where I got them www.harley-davidson.com/us/en/shop/saddlebag-storage-stand/p/94778-10
You mentioned that you have installed just about every exhaust out there. I was wondering if you have ever put on a set of the Boneshaker exhaust? They have a couple different versions of them for the M8. When I put a cam in my bike it really woke up the pipes and made them sound good. I’m curious what you think about them.
installed a few sets...never was a fan of the trumpet style slip ons but thats an opinion ..had a ton of them turn grey and ashy looking..the coatings are not great...seen the chrome chipping and peeling on the tips too..I dont recommend them
Hey Steve, TAB w/medium baffles VS Rinehart exhaust. The Rineharts have always had that low deep rumble as well. In your opinion, the TAB's are a better sound than them? Thanks, great video as always! ✌😇
I would hand down choose TABs over Reinhart's any day...absolutely. But slip ons are really just a matter of opinion...just changing the slip ons will not gain you any significant seat of the pants HP..I always tell epople to pick the one they like the sound of and how it looks.,...thats the best one for you.
Advanblack making the tank covers for the 2024 baggers?…thanks!
working on it...yes
Just remember the sound of a goldwing is the sound of precision engineering!
i have nothing against goldwings at all...great motorcycle...too quite lol
it seems to me the more technology refines the bikes and makes them bigger and faster; they sound more like Japanese bikes., don't get me wrong i like my 2019 RG. i was thinking of upgrading to a 2024 RG CVO instead but the cost is insane for a daily driver, I'm going back to an old pan head or shovelhead instead. two bikes make the best of both worlds. Thanks Advent keep it up! great stuff cool video's.
yeah this one certainly has a whine to it that the older models didnt...nothing wrong with an old pan or shovel...im still searching for one
@@sikbaggerswhat model shovel are you interested in? I have a line on a 1976 FXE in Md. I thought about it for myself, but I don’t have the time to take care of it and make it a safe rider.
Hey Steve what is the best or at least acceptable lubricant to use for lubing cables ?
hey bro harley has a lube with a precision tip on it for like 8 bucks...it only takes a few drops...or use a molly based lube like bike Aid Dri Slide ...its a big o bottle and costs way more..the harley lube goes a long way and its cheaper
@@sikbaggers thanks Steve I really appreciate it, I’ve ordered one of those cable lube tools that clamp on the end of the cable but I’ve always heard not to use regular lube like WD40
you can really hear the high pitch whine in that engine
yeah its certainly there for sure
Tab Performance has a set up where you can get 1 Zombie baffle and 1 2.5 inch baffle
yeah..you could change them out to whatever baffle you want..never seen that set up done before but yes it is possible
Far better sound!
agreed! no more singer sewing machine lol
I have the tab 4.5 bam sticks and their 2-1-2 header. I noticed my right side exhaust is coming out cool/cold and the left side is hot. Is that normal? Headers are hot but exhaust is cold when it comes out. No exhaust leak, no plug issues and bike runs fine, just find it odd.
after you changed the header did you do a proper tune on it? If you tuned it with a canned map you could do a auto tune on it...also the right side header and slip on have a much larger opening so it will run slightly cooler..it really isnt something I would worry about too much.
@@sikbaggers thank you for the response. Yes I got it tuned and dyno after the install was complete. Just wanted your input before I made it a concern for the dealer. Thanks again and love the content.
Excellent video Steve. I've been a subscriber for a long time and value any recommendation you put out and follow your how to videos all the time. Lifesaver. Question: I have a 2023.5 CVO RG and I want to add a dominator fender and long bags on rear and a wrap around hugger fender on front. Does AdvanBlack have a color match for the CVO models mine is Dark Platinum. If so can you use my bike on your show to do the modes? I know you are busy and I'm joking but if you can then lets do it. Would also love to add the traditional style lower leg fairings by adding those with a standard size engine guard if you all can pull this off. This is the reason why I went with my bike: th-cam.com/video/gQBckcT1SNQ/w-d-xo.htmlsi=22wxf2LZIDCGM59z
Hey Chris...much appreciated sir! We do offer that color with the pinstripe on the tour pack..as of right now we know the old stretched bags and dominator fender fit the bike but that would require you to go back to the old style and also do the lids and hardware too. We are working on new stretched bags and a stretched fender extension though so you can use the new wider top lids and hardware but it is not done yet. The front fender as of right now doesn't fit the new forks...we are working on new adapters for that as well..like all the other companies we are playing catch up on making all new parts and some of these just take time. The lower fairings wont work either as of right now...all things we plan on working on fr the new models though. And yes we can colab any time man...once we get some parts in here for these new beasts we can get together and arrange something...hit me up at steven.housden@gmail.com and we can talk about it for sure!
First!
thank you for checking it out bro!
What is that whining?
aaahh the new M8.