I was having a hard time putting it back on the part with the two screws, I came back to watch this video again ... I was trying to fit the two rubber parts inside and in the video they are outside 😅 videos and pictures are much better than written instructions.
@@TariqTheTutor Lol! Yeah, everything isn't always the same. I've found that pics and vids are WAY more helpful. Thanks for watching and the comment! 🤘🏻
I am about to start this endeavor tomorrow with my 2003 . Thank you for showing me many things I would have overlooked . This video is a life saver for a guy who is not very handy when it comes to electrical work . Just one question . Is the wire colors the same for all TJs?
@@John-eh6jg Good question. My best answer would be MAYBE. I just really don't know. I would THINK so, but nothing is guaranteed. Hope all goes well!🤘🏻
so lucky you don't have an EVAP Canister to deal with. but, +1 and good advice to use twist connectors to test. lots of good advice all around, really.
I can't remember right off the top of my head. But, I (think) I still have the old relay. I'll try to find it and let you know. Thanks for watching and the question! 🤘
A few of the LEDs inside aren't working when I have my lights on. I think only 3 out of the 12 work. Can I replace them individually like halogen lights or do I need to replace the whole thing?
@@TariqTheTutor If you've recently purchased from Amazon, I'd contact the seller and see if they'll send you a whole new light. Personally, I wouldn't mess with changing individual lights, and not even sure if you can do that on these.
@@ShockWaveOffroad thank you for your quick reply! Nope, I recently bought the Jeep and it came with those LEDs, and I was bothered by the hyper flashing and that's how I found your video. I bought the relay and installed it recently but not the LEDs themselves.
I know this video was made a few years ago, but I have a question, I tried to do the same, but with a different relay. Did you have issues with the hazard lights? Also, did the radio and all the other equipment turn off when the jeep was completely off?
No, we've not had any issues with the hazard lights. As far as the radio and "other equipment", if your radio stays on with the key off, someone wired it incorrectly. The lights have nothing to do with the radio. Thanks for watching and the question! 🤘🏻
I’m trying to install this same set of lights onto my 2006 TJ Jeep, all of my connections are good but when I turn on the left turn signal, both flash like hazards, would replacing the flasher relay also fix this?
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
worked just fine....thx
@@barrysmith7258 Glad the vid helped!🤘🏻
I was having a hard time putting it back on the part with the two screws, I came back to watch this video again ... I was trying to fit the two rubber parts inside and in the video they are outside 😅 videos and pictures are much better than written instructions.
@@TariqTheTutor Lol! Yeah, everything isn't always the same. I've found that pics and vids are WAY more helpful. Thanks for watching and the comment! 🤘🏻
Great explanations! Tomorrow will be easy now (right).
I am about to start this endeavor tomorrow with my 2003 . Thank you for showing me many things I would have overlooked . This video is a life saver for a guy who is not very handy when it comes to electrical work . Just one question . Is the wire colors the same for all TJs?
@@John-eh6jg Good question. My best answer would be MAYBE. I just really don't know. I would THINK so, but nothing is guaranteed. Hope all goes well!🤘🏻
so lucky you don't have an EVAP Canister to deal with. but, +1 and good advice to use twist connectors to test. lots of good advice all around, really.
@@wbwright79 Glad you approved of the vid. Thanks for watching and the comment! 🤘🏻
EXACTLY the info I needed on the relay. Thx!!
Glad it was helpful. Thanks for watching, and the comment!!
Is the relay a two pin, yours doesn't show how many pins, I have a 2000 TJ, just like to know before I order, thanks ahead.
I can't remember right off the top of my head. But, I (think) I still have the old relay. I'll try to find it and let you know. Thanks for watching and the question! 🤘
A few of the LEDs inside aren't working when I have my lights on. I think only 3 out of the 12 work. Can I replace them individually like halogen lights or do I need to replace the whole thing?
@@TariqTheTutor If you've recently purchased from Amazon, I'd contact the seller and see if they'll send you a whole new light. Personally, I wouldn't mess with changing individual lights, and not even sure if you can do that on these.
@@ShockWaveOffroad thank you for your quick reply! Nope, I recently bought the Jeep and it came with those LEDs, and I was bothered by the hyper flashing and that's how I found your video. I bought the relay and installed it recently but not the LEDs themselves.
@@TariqTheTutor 10-4
If it were (ME) I'd just replace the whole assembly. These lights are inexpensive enough for that to make sense.
@@ShockWaveOffroad that makes sense. Thanks again for the replies, I appreciate it.
Thank you for the great video
@@TariqTheTutor Glad it was helpful!🤘🏻
excellent guide. very helpful.
Glad you liked it. Thanks for watching and the comment! 🤘🏻
Nice install and troubleshooting video.
Thanks, bro! Appreciate your support!!👊🏻🤘🏻
Awesome video. Really good information thanks 🙏
Glad you liked it. Thanks for watching and the comment! 🤘🏻
I know this video was made a few years ago, but I have a question, I tried to do the same, but with a different relay. Did you have issues with the hazard lights? Also, did the radio and all the other equipment turn off when the jeep was completely off?
No, we've not had any issues with the hazard lights. As far as the radio and "other equipment", if your radio stays on with the key off, someone wired it incorrectly. The lights have nothing to do with the radio. Thanks for watching and the question! 🤘🏻
I’m trying to install this same set of lights onto my 2006 TJ Jeep, all of my connections are good but when I turn on the left turn signal, both flash like hazards, would replacing the flasher relay also fix this?
Yes. There is a link to the relay I used in the video description.
Those new lights look great,,,
Thanks, buddy! The ole lady is real happy now. Thanks for watching and the comment!!👍🏻🤘🏻
Thanx!
good stuff, ty!
Glad you liked it!! Thanks for watching and the comment. 🤘🏻
GREEN FOR RIGHT. GREAT VIDEO
Glad you liked it. Thanks for watching and the comment!!
@@ShockWaveOffroad I'VE GOT A 2000 TJ I'VE FINALLY DECIDED TO UPGRADE AFTER 20 YEARS LOL. LOT'S TO DO....
@@starman10548 It's a Jeep. There's ALWAYS lots to do, LOL!!
Great Video I have the same lights on my 2001 TJ thanks for doing this I also use the Flasher the GCD TJ0106 to stop the Hyper Flashing
Stay tuned. My wife's TJ is almost ready to unveil! Long arms, axles and all the goodies, LOL! Thanks for watching and the comment! 🤘🏻