!!!IMPORTANT!!! You really dont need to cut the wire! The plastic connector ( the white one that goes to the motherboard) is very soft, you can use tweezers to open it up pin by pin and litterally slide out the metal part inside, and slide them back in with no problem, No need for soldering or a new cable! Also i drilled a small hole in the grill part of the back and I’m keeping the motherboard outside of the wheel! So no need for desoldering any button!
Hey dude! What’s your force feedback settings for beamNG? Should I put smoothning high or low? Also nice work! I hope the 2020 F1 mod gets released soon!
I'm not 100% sure, but you probably need 7P H2.54 Cable, something like this: www.amazon.com/dp/B089W975B5/ref=twister_B08R41PG37?_encoding=UTF8&th=1 or pl.aliexpress.com/item/4000698884218.html?spm=a2g0o.productlist.0.0.1b6326ceuputMl&algo_pvid=51868d81-b46e-427b-b9fc-fae481aafd35
Hi! I printed this adapter and I’m currently using it with a f1 wheel from amstudio and its working great, i advice to put some black electrical tape on the steering wheel end to ha a more snug fit, but for the rest it works very well for me!
@@issamfakiri5430 my wheel is a custom made one following AMSTUDIO tutorials, you should go check out his videos, my wheel has a usb cable coming out of it and it plugs into the pc, thats how the buttons work So you are connecting both the wheelbase and the steering wheel with 2 different usb cables
I've purchased and printed it, i noticed there weren't options for 50mm or 70mm wheels, but of course i'm sort of expecting it. My guess is that the diameter for this one is 52mm so yea it doesn't really fit but other than that the adapter is one of the shortest option i can find
Please note: Technically, you don't need to de-solder the wire, you don't even need to connect it to anything! With the new Logitech software, the wheel is recognized, the force feedback does work but all the buttons are pressed in meaning you would need to de-bind them in the software/sim. THERE IS AN EASY WORKAROUND TO THIS! If you find a breadboard jumper wire, (make sure it's male to male), you can plug the jumper wire from the black wire to the yellow wire on the cable coming from the wheelbase, which fixes the issue of all the buttons being pressed AND makes sure your FFB works flawlessly.
So, in a sense, you have two options if you want to forgo the connection to the original PCB? Either you de-bind all mappings into the G Hub software and the wheel will work correctly again just without the original buttons, OR you use a breadboard jumper wire for the 7-pin connector coming from the wheelbase, and both solutions will allow the wheel to work as intended? Like, both of those are valid solutions, right?
@@hamingnu6610 Yeah pretty much, I just jumped the black and yellow wires on the 7 pin to allow me to use all the buttons normally without unbinding, That is the route I would recommend.
@@nitrouss_1936 I have done mods to my wheel and I want to do it so when not using I can take the weight of it but getting a real quick release wouldn’t that not handle the plastic of the wheel
Would't it be too warm for the motherboard to be replaced in the wheel base? Because sometimes when you playing with the wheel, u can feel the back to be warm. Would't it damage it?
I hard to judge, I don't think this is the case, but I can't guarantee anything. I can say that I'm using this mod for over a year and it working without any issues.
so, i knew your project on thingiverse.com, but because of my current conditions i cant pay for it, im sorry that i dont paid, but thank you so much for it and.. yeah so i came here and subscribe and like the video because you deserve it.
yes u can have them behind the wheel like I am going to do u can find videoes of people having the buttons behind the wheel everywhere but I dont know if u can have it on the wheel
@@jademonkie That's what I have heard is the solution. So in a sense, the guy didn't need to make a solution to tuck the original PCB inside the case to keep it connected because I have heard you can just disconnect the original PCB, unmap all the inputs in G Hub for the G29, then it will work. Scroll to Page 9 here: docs.google.com/document/d/1HvM2y7hRKmYDBOByQg4mSQwFDWt6M4mZDbIlmfuEIjM/edit
Looks like you don't have to keep the controller board connected, you just need to complete the circuit on the first two pins of the connector, watch this guy’s video th-cam.com/video/Xn8MtHFnERk/w-d-xo.html
!!!IMPORTANT!!!
You really dont need to cut the wire!
The plastic connector ( the white one that goes to the motherboard) is very soft, you can use tweezers to open it up pin by pin and litterally slide out the metal part inside, and slide them back in with no problem, No need for soldering or a new cable!
Also i drilled a small hole in the grill part of the back and I’m keeping the motherboard outside of the wheel! So no need for desoldering any button!
Why does the electronic board have to be in the wheel base?
does g29 work without pcb connected? i just want to remove it
No, it will not work
@@Raidersky thanks
Can I buy the 3d printed part somewhere? As i dont have a 3d printer
I don't think anyone sells that. I can do it for you you may want. Write an email with a description or contact us on the website
SURE. ALIEXPRESS
I don't understand how you got to fit the pcb inside the case. I have a g920 so smaller pcb but i find no way to fit it inside
well, It work for me, there is on the video how I fit it, but if you can't fit it don't try too hard, because you can break the pcb
Do the extra buttons that are more than the G29 work?
Hey dude! What’s your force feedback settings for beamNG? Should I put smoothning high or low? Also nice work! I hope the 2020 F1 mod gets released soon!
Hi! where can i buy the replacement cable? (the cable you cut in this video)
I'm not 100% sure, but you probably need 7P H2.54 Cable, something like this: www.amazon.com/dp/B089W975B5/ref=twister_B08R41PG37?_encoding=UTF8&th=1
or pl.aliexpress.com/item/4000698884218.html?spm=a2g0o.productlist.0.0.1b6326ceuputMl&algo_pvid=51868d81-b46e-427b-b9fc-fae481aafd35
why tf did he cut the cable when you can just take the pins out and put them in again
so now is it available with the ecosystem ?
good friend can you explain how you soldered the wires all over again
How do all the buttons on the wheel face work with this?
Ma se uso una corona nuova con paddle shifters quest ultimi funzionano o funzionano solo quelli del g29?
Hi! I printed this adapter and I’m currently using it with a f1 wheel from amstudio and its working great, i advice to put some black electrical tape on the steering wheel end to ha a more snug fit, but for the rest it works very well for me!
Do the extra buttons that are more than the G29 work?
@@issamfakiri5430 which buttons are you talking about?
@@ludovicopintor6305 Once you installed the other wheel. It has more buttons and other positions. Do these buttons on the new wheel work?
@@issamfakiri5430 my wheel is a custom made one following AMSTUDIO tutorials, you should go check out his videos, my wheel has a usb cable coming out of it and it plugs into the pc, thats how the buttons work
So you are connecting both the wheelbase and the steering wheel with 2 different usb cables
How do i attach a 70mm bolt pattern steering wheel?
Does it still work after you cut the cord
I used this system and the bit on the wheel snapped, is there any metal ones that you can get
I've purchased and printed it, i noticed there weren't options for 50mm or 70mm wheels, but of course i'm sort of expecting it. My guess is that the diameter for this one is 52mm so yea it doesn't really fit but other than that the adapter is one of the shortest option i can find
I use a guy that does all my 3d prints for full size race wheel
Można coś takiego kupić, bo nie mam drukarki 3D?
nie wydaje mi się, aby ktoś sprzedawał coś takiego. Mogę to zrobić dla ciebie jeżeli chcesz. Pisz na emaila z opisu, albo kontakt na stronie
@@Raidersky a jak się to zrobi to można zamontować przyciski?
nie, do oryginalnej kierownicy nie da się potem w prosty sposób wszystkiego zamontować
Please note:
Technically, you don't need to de-solder the wire, you don't even need to connect it to anything!
With the new Logitech software, the wheel is recognized, the force feedback does work but all the buttons are pressed in meaning you would need to de-bind them in the software/sim.
THERE IS AN EASY WORKAROUND TO THIS!
If you find a breadboard jumper wire, (make sure it's male to male), you can plug the jumper wire from the black wire to the yellow wire on the cable coming from the wheelbase, which fixes the issue of all the buttons being pressed AND makes sure your FFB works flawlessly.
So, in a sense, you have two options if you want to forgo the connection to the original PCB?
Either you de-bind all mappings into the G Hub software and the wheel will work correctly again just without the original buttons, OR you use a breadboard jumper wire for the 7-pin connector coming from the wheelbase, and both solutions will allow the wheel to work as intended? Like, both of those are valid solutions, right?
@@hamingnu6610 Yeah pretty much, I just jumped the black and yellow wires on the 7 pin to allow me to use all the buttons normally without unbinding, That is the route I would recommend.
cool, but how sturdy is it? and you lose button functionality on the wheel? did you revert this mod afterwards?
there is clearly a lot of play there
@@nitrouss_1936 wym a real one? Where?
@@nitrouss_1936 I have done mods to my wheel and I want to do it so when not using I can take the weight of it but getting a real quick release wouldn’t that not handle the plastic of the wheel
works with g27?
May as well buy a fanatec wheel. So you have to do all this but then get another wheel to use buttons
Fanatec = 700 tho 😅
@@dracofnwraco what I’m saying is he puts the release system stuff on and then has to put a new wheel one which probably costs a few hundred.
Would't it be too warm for the motherboard to be replaced in the wheel base? Because sometimes when you playing with the wheel, u can feel the back to be warm. Would't it damage it?
I hard to judge, I don't think this is the case, but I can't guarantee anything. I can say that I'm using this mod for over a year and it working without any issues.
@@Raidersky alright fair enough, thx btw
thanks you are top guy , from Brazil
so, i knew your project on thingiverse.com, but because of my current conditions i cant pay for it, im sorry that i dont paid, but thank you so much for it and.. yeah so i came here and subscribe and like the video because you deserve it.
hi, if i have an external wheel do i need to save the cable from the wheel?
Brando vibing Wikwik wikawika
Yay tamat
It work on g27??
can i attach it with all the elelctronics/buttons still on?
What do you mean?
@@Pislik870 i think he means that he still want to use the g29 buttons.
MisterSilence TM Oh yeah but ur prob not gonna reach them anyway...
@@Pislik870 okay thnx
yes u can have them behind the wheel like I am going to do u can find videoes of people having the buttons behind the wheel everywhere but I dont know if u can have it on the wheel
I would of so kept the board out or cut holes in the top so buttons could stick through
Hey are you still making these 3d prints?
do you have a male end for 70 mm aswell? there is not one in the file
Send me an email www.projectnextrace.com/contact
which material did you use ?
Why you put the electronics in the case?
because to install a custom wheel the original electronic must stay connected. Moving it inside the case is more practical and gives cleaner look.
@@Raidersky but is there any reason for this? what happen if you remove them?
it's like a motherboard for the base, if you remove it force feedback, pedals and steering won't work
@@Raidersky Would you still need to keep the motherboard attached if you just deactivated all the buttons in the steering wheel setup page?
@@jademonkie That's what I have heard is the solution. So in a sense, the guy didn't need to make a solution to tuck the original PCB inside the case to keep it connected because I have heard you can just disconnect the original PCB, unmap all the inputs in G Hub for the G29, then it will work.
Scroll to Page 9 here:
docs.google.com/document/d/1HvM2y7hRKmYDBOByQg4mSQwFDWt6M4mZDbIlmfuEIjM/edit
Looks like you don't have to keep the controller board connected, you just need to complete the circuit on the first two pins of the connector, watch this guy’s video th-cam.com/video/Xn8MtHFnERk/w-d-xo.html
how much time did it cost to solder the wires back together when you cutted that part?
something around 15-20min
@@Raidersky okay and you used heatshrink for every tiny colored cable? Im now at the stap that i need to solder them back together
@@Pascalleke_ Yes, heatshrink on every cable
@@Raidersky thanks m8
@@Raidersky i have a complete F1 Mercedes 2020 replica
But how to use your buttons?
You won't be able to use original buttons, this quick release is for custom wheels, that use thier own buttons
@@Raidersky thx
Boa tarde.
O volante não funciona sem a placa? É Possível montar sem ele?
Amigo sem a placa frontal não funciona, eu converti meu g27 em um g920 e a pior parte da conversão foi achar essa placa frontal.
O g29 não funciona sem a placa?
What music it’s called
Different Heaven - Safe And Sound [NCS Release]
ProjectNextRace thank you 🙏
good work but.... original button ....
What wire did he cut
I cut the wire which connects the steering wheel, but you must reconnect it later or buy a new one.
0:09 wysi
it has slack wow..........
Am studio copy
milo Holmberg whats your point
Looks like this would easily break tbh....
It isn't, I'm using it for a few months and It's doing really well.
wow that's a terrible print. good Lord
hey was going on i would like to buy this off u instead of me making it if you in inbox me asap
does it work on the g920 too?