Was planning to change it myself... guess I'll leave it to pros like you ! Anyway, thanks for taking the trouble to detail and indicate each steps with such precision : great vid !
You earned your money their lad - I used to do the exact same thing every weekend earning Guvvie money when i was younger and needed the money........Now me Knee's, Back, Elbows and everything else is knackered.
Well what can I say,watched all Kelvin's video,s,that man is dedicated to clutch replacements,some a few his way,every time a success , keep up up good work,your my mentor.🙂
je suis un amoureux de la mécanique et je vois ton boulot qui est parfait mais il faudrait que tu fasse montrer le montage de l embrayage pour les debutant
Hi Kevin, I watched your excellent videos on the Fiat Panda and did the clutch, its been driving since doing that in February, only issue a 'twirling' sound that comes and goes, do you know what this could be?
@@WMCS hey buddy. I've a 2013 Clio 1.5d with a juddering pull away and slips when overtaking at 60+ and don't change gear. Is it best to get 3pc kit or will cover and plate do?? And would be getting a LuK branded. Heard all the others are not worth it. Thanks for any help in advance.
Thanks for the video. Just have to ask if, at the end, I need to bleed the system with dot 4 ? Ps: I would also like to see you installing the new clutch in place.
Kevin, what are the 1/2inch deep impact swivel sockets you use? I've done a couple of clutches now after watching your videos as a 'how to'. Some of it is awkward enough and you're able to video it all on top of that! Also, the cap you are putting over the clutch line, what's it. I've been using the finger of a rubber glove and an elastic band this far lol!
Great vid Kevin enjoyed watching it I'm a bit of a novice mechanic and this weekend looking at changing 07 plate kangoo gearbox and clutch is the procedure on what you have done the same any pointers would be great
It is really impressive. I know you're used to it and that it's your job, but how do you remember the location of all the parts during reassembly, to remember the screws, not to forget anything?
If you ever think a Dacia with the same engine and gearbox is the same... ...it's not... The subframe is not a two-piece, but one big cradle. I had a 'box change and found out it doesn't fit through. Read: remove subframe/steering rack/E-hydraulic pump-combo. So much fun. Impossible to do in that 4 hours... Be warned.
Super , très bien ! Je ne parle pas bien anglais !😀 Tes vidéos sont vraiment super ! J ai 50 ans et je suis enseignant . Ça m’a donné envie de faire de la mécanique et donner confiance pour changer « my clutch » Clio 1,5 dci ! Ton job est très physique ! Toutes mes félicitations 👍🏽
Hi! Very nice video. Very useful for me!. Thanks! By the way, could you comment about the tools you used? For example, the jacks are for 2 or 3 tons? What mark/branch? Where can they be bought? I guess that the battery impact wrench is for 1/2". I am very surprised about the weight of the gearbox as I see how you can handle it over you. That is something I figured out, but until now, everybody was using cranes or other kind of supports, so I was very cautious about that. Was it very heavy?
Hi Oscar you will need a set of metric spanner, a 3 ton jack, a set of 3/8 metric socket, a set of 1/2 drive metric socket, some extension bars in both 3/8 and 1/2. If you want i can make a short video to help you with what tools you require for a start up business.
@@WMCS I almost forgot my very first comment, when I discover your channel. I did not remember when it was. I would really appreciate that video, if not for a business, but to make DIY reparations, as it is my case. Cheers!
![ออร่า (AURA) - JUEPAK feat. SARAN | [OFFICIAL MV]](http://i.ytimg.com/vi/RY9j7Lzp-FI/mqdefault.jpg)
Was planning to change it myself... guess I'll leave it to pros like you !
Anyway, thanks for taking the trouble to detail and indicate each steps with such precision : great vid !
You earned your money their lad - I used to do the exact same thing every weekend earning Guvvie money when i was younger and needed the money........Now me Knee's, Back, Elbows and everything else is knackered.
You made it look so easy.
Well what can I say,watched all Kelvin's video,s,that man is dedicated to clutch replacements,some a few his way,every time a success , keep up up good work,your my mentor.🙂
That’s it mate. It’s all it nothing. Glad to hear you’re picking up some great tips on how to tackle those jobs. Are you in this field already.
Valoro y aprecio el esfuerzo para hacer este video.
Enhorabuena, muchas gracias!!!
Great video, did the clutch and timing belt myself :)
great job man and a great real mechanic, BRAVO..!!
I decided, before seeing this, to go the battery box route and 2 man with my son .. well done though - didn't think it possible this way to be honest!
je suis un amoureux de la mécanique et je vois ton boulot qui est parfait mais il faudrait que tu fasse montrer le montage de l embrayage pour les debutant
Thanks. Will do. 🍻
Nice vedio.and your great easily handled gear box excellent.
Hi Kevin, I watched your excellent videos on the Fiat Panda and did the clutch, its been driving since doing that in February, only issue a 'twirling' sound that comes and goes, do you know what this could be?
The incredible clutches warrior 🙂✨👍🏼
Awesome video dude! Tackled this myself watching your video today. About 7 hours in total.
Does help having a 2 post lift though 🙂
Good effort for taking this on.... thanks for sharing. Glad to hear you managed it ok.
Amazing skills when dropping engine does all the mounts have to be taken off before the engine can drop or is it only the gearbox mouts tha come out
Firstly thanks a lot for the review..,,
Not the engine mount. Only the gearbox ones..,,
@@WMCS hey buddy. I've a 2013 Clio 1.5d with a juddering pull away and slips when overtaking at 60+ and don't change gear. Is it best to get 3pc kit or will cover and plate do?? And would be getting a LuK branded. Heard all the others are not worth it. Thanks for any help in advance.
Thanks you for your fantastics videos! Number 1
Greetings form Italia 🇮🇹
Thanks for the video. Just have to ask if, at the end, I need to bleed the system with dot 4 ?
Ps: I would also like to see you installing the new clutch in place.
No probs. Thanks for the review
Kevin, what are the 1/2inch deep impact swivel sockets you use? I've done a couple of clutches now after watching your videos as a 'how to'. Some of it is awkward enough and you're able to video it all on top of that!
Also, the cap you are putting over the clutch line, what's it. I've been using the finger of a rubber glove and an elastic band this far lol!
Mac VUP2BA, the cap usually comes with new concentric cylinder as a dust cap
🍻🍻🍻🍻
@@WMCS Thanks for that! I thought they were actual individual swivel sockets. Keep up the good work 👏
Really helpful, thanks, great job!
This was only showing how to remove gearbox not clutch, but still very useful video
The clutch have six bolt
Great vid Kevin enjoyed watching it I'm a bit of a novice mechanic and this weekend looking at changing 07 plate kangoo gearbox and clutch is the procedure on what you have done the same any pointers would be great
How much km has the Renault got??
A tricky job made to look easy. A man needs a lot of strength to lift a gearbox out in such a small space.
Kelvin you go to the gym,your lifting those gear boxes ,making it look easy,great video,s
Bonjour très belle vidéo merci beaucoup
Merci Aussi 🍻🍻
It is really impressive. I know you're used to it and that it's your job, but how do you remember the location of all the parts during reassembly, to remember the screws, not to forget anything?
Im about to this on my car but i dont know the flywheel torque because i want to change the seal behind the flywheel .. do you know?
Cristiano Joana I can find out if you give me your vehicle registration
@@WMCS im not from uk is that a problem?
Cristiano Joana in that case you’re looking at 70nm +36•
Didnt expect to be so high, thanks
Cristiano Joana is it a 5 or 6 speed
Super travail, pourriez-vous me donner la référence du kit d'embrayage .
J'ai une clio 4 1.5 DCI 90 CH de 2014.
MERCI
Is it for Automatic 1.6 16v same process?
Excellent work!
Bálint Kamara thanks for your review mate.
et aussi le montage des cardans dans la boite
Simply, Hero.
J'adore t'ai explication 😆👍
Have a leaky transmission here. It started to zoom. Not looking forward to do all this on a muddy unpaved parking lot with an incline.
Take extra care on non hard standing. I wouldn’t personally recommend it.
If you ever think a Dacia with the same engine and gearbox is the same...
...it's not...
The subframe is not a two-piece, but one big cradle.
I had a 'box change and found out it doesn't fit through. Read: remove subframe/steering rack/E-hydraulic pump-combo. So much fun. Impossible to do in that 4 hours...
Be warned.
Hi clutches warrior, is it the same steps for Clio 3 please ?
Who knows does this Clio 4 1.5dci have a dual mass? Also what kind of clutch was fitted on this car? I mean clutch disc is with springs or without?
Hi clutches warrior, is it the same steps for Clio 3 1,5 dci 2011 please ?
Super! How much cost that work?
how did the clutch need replacement after only 4 years
Not sure mate…
what is the jack stand height ?
You must be strong!
fair play mate solo fitting gearboxes..... Ever ended up squashed an waiting for you clients to come home to give you a hand?
The only squash i have is in my water 😜
Kevin, do you really need to take off the drivers side hub and drive shaft?
Givemethejob in this one yes. Purely because you can’t get past the subframe mid section.
nice video lad
Respect bro
hoy did you bleed the clutch slave cylinder?
Hi Billy. Have a look through the most recent videos for more insight.
Bravo 👍🏽 very good job
Sudine Babz merci beaucoup ...😁
Mais tu parles français ? 😄
Sudine Babz je parle francais oui.... pas tres tres bient. Simplement pour une conversation. Pas probleme😁😆
Super , très bien ! Je ne parle pas bien anglais !😀
Tes vidéos sont vraiment super ! J ai 50 ans et je suis enseignant .
Ça m’a donné envie de faire de la mécanique et donner confiance pour changer « my clutch » Clio 1,5 dci !
Ton job est très physique !
Toutes mes félicitations 👍🏽
Merci pour votre réponse
Salut et bonne journee...
please how many hours of work for replacement clutch
farid fahssi in this one Vehicle about 4 hours. Thanks.
Bravo
Great video. More videos clio iv.
Best !!!
Hi! Very nice video. Very useful for me!. Thanks! By the way, could you comment about the tools you used? For example, the jacks are for 2 or 3 tons? What mark/branch? Where can they be bought? I guess that the battery impact wrench is for 1/2". I am very surprised about the weight of the gearbox as I see how you can handle it over you. That is something I figured out, but until now, everybody was using cranes or other kind of supports, so I was very cautious about that. Was it very heavy?
Hi Oscar
you will need a set of metric spanner, a 3 ton jack, a set of 3/8 metric socket, a set of 1/2 drive metric socket, some extension bars in both 3/8 and 1/2. If you want i can make a short video to help you with what tools you require for a start up business.
@@WMCS that would be a good video 👍
@@WMCS yeah that would be great. With you narrating. Great work brother and respect.
@@WMCS I almost forgot my very first comment, when I discover your channel. I did not remember when it was.
I would really appreciate that video, if not for a business, but to make DIY reparations, as it is my case. Cheers!
Anyone know what impact he's using.
Enlightened News it’s a Milwaukee fuel
@@WMCS Thanks Kevin. And respect, great job pig of a job under the car been there. Wishing you all the best brother.
Enlightened News thanks for stopping by. And thanks for the feedback
respect
Si un jour tu viens à La Reunion, dis le moi , j ai mon embrayage de Clio à faire 😅 et c est une très belle île
Salut et Merci beaucoup… j’aimerai bient visiter la Reunion. Peut etre l’anee prochaine..
@@WMCS vraiment ?
Tiens moi au courant ✨👍🏼
Renault Trafic ???
hello my friend if you put the title in English and French you will increase the views. Good luck
I watch food being cooked in German and even french sometimes.
Teşekkürler saol
GENIAL
Video k nicemu…
Only one thing, the operations for remove the low ball joint is not correct!!!!!
Erick Guerrero was a bit of a butcher job.
What most mechanics do including me it doeant cause damage if your careful
🇨🇵👍👍
Worst designed car ever made