Hello I need help I have a pc that should be able to stream it has a Xeon e3 1220 and an rx580 8gb with 10gb of ram is it my internet should I get a Xeon e3 1230
@@ThomasLancheros-kg1nl I don't know much about computers either but you can get help at Reddit. There is a subreddit called /buildapc, I recommend you go there
@@ThomasLancheros-kg1nl from what I see on the specs of the e3 1220 and the 1230 it wouldn't make much of a difference. There seems to only be a 100MHz difference between them. It may make no noticeable difference at all. I can't really tell you anything about streaming though and especially not streaming on a lower budget.
@@ThomasLancheros-kg1nl bruh, if it's the v1 e3 1220 lga 1155 then you might be able to play at 1080p but you might struggle with streaming at the same time. The v1 e3 1220 is worse than any ivy bridge i5.
Man I still remember 4 years ago when he posted $200 & $300 part picker builds ...now he gets sponsors from corsair....keep going bud ....I keep loving your content more and more with each new video.
I Agree Matt... Building into an old IBM cases can be amazing! I built into a mini form factor IBM Net Vista (circa 2005) A lot of metal grinding and fabrication and a mini ATX board will fit beautifully. Thanks for the custom video install.
I rock the real S30 for my main rig and it's awesome, it isn't extreme with it's E5-2689 8c/16t, 32GB 4 channel DDR3, RX580 8GB, but for my displays it's more than enough - the legendary DELL U2410F and the still awesome DELL P992 Trinitron CRT and for gaming nothing beats that tube.
The cuts on your fingers explain it all. Good work on yet another great video! The PC looks amazing and a beginners guide to water cooling would be very very helpful. Have you thought of doing a budget waterloop using cheaper parts :)
Yeah you've only gotta worry if you're literally pushing on it constantly, considering it's a waterblock, I dont think you'd be touching it at all lmao.
whats next for sleeper kind. A computer that looks old on the inside and outside but is actually op? Sleeper mini Itx Pcs? Sleeper PC but it chills at sub 0? We Shall never know...
I love your dedication and patience. RGB on a sleeper build is an oxymoron I think. Blingy, flashly lights totally negates the sleeper portion of the build. lol
For the card reader in the front panel you can stick a piece of black sponge or foam padding from the inside. Or if you are looking for a working card reader, then you can pick up a usb card reader and use it with a modified front cover to fit your case. I guess it's a tight spot to have a working card reader so put foam would make it look better.
Your first water cooled pc is a sleeper pc and it's got the top of the line spec hardware and it's in a crappy 10$ case you've got some guts, being this your first time
Not sure if you are aware or not but it has become clear that the waterblock for the GPU has a leak problem. In normal use it should be fine but do not put any pressure behind the block where the pipes connect. Corsair are now aware of the problem and are as far as I know looking to fix the problem.
Again, your ingenuity and creativity is mind blowing. You never stop coming up with ideas for these videos and you cease to amaze me. This is such a cool build I watched the whole way through and am still amazed you put this together. Great video as always :)
Bruh that thing is gorgeous. Really reflects the effort you put into it! If you have the footage for the watercooling bit, please do. Otherwise I'm not gonna ask you to put in all the work if it's not heavily requested.
Matt, you make the BEST PC building videos on the web. Since I started watching your channel I think I could build my own PC if I wanted to. I don't think I will try water cooling though. Thanks for the great informative videos!
The conundrum is that yes you did a great job but again those components belong in a modern case designed with watercooling in mind. But I like to tinker and mod so I 100% understand.
Fantastic build Matt. Very much like you to rock a case and components like that. I'm Inspired to build something similar. Hope you use this as your daily driver for a while. Thanks for the great videos.
It would be awesome if you find a way to add an identical handle for the other end of the case (would be reminiscent of some of Cooler master's 2010~ case line in that regard - gosh it makes me feel old remembering cases designs from such an era)
For your next build, use air presure testing to see if your build has any leaks. bit-tech has a great video showing how its done. Nice build overall tho.
Why didn't you used two distinct radiators one for cpu other for gpu. But a Bluetooth one pc start button it will be super cool to start pc from outside your house then sit and immidiately have a head shot
Hey there. I would love to have a video on your first tubing experience. I've got an AIO and I dream of doing watercooling. Take care and love from France.
Hello I need help I have a pc that should be able to stream it has a Xeon e3 1220 and an rx580 8gb with 10gb of ram is it my internet should I get a Xeon e3 1230 (Edit) plZ like this I need Matt’s help
Very well-done! I'd like to do a sleeper rig with RGB lighting but I'm on the fence about water-cooling. Always thought there'd be too much potential for leakage and thus a bricked system. If I took a beige box and modded it this way, I'd keep the floppy drive, though. Dr. Moddenstine did a sleeper rig made from an IBM Aptiva tower and he converted the floppy drive into an SD card reader, using the disks as caddies. I thought that was very cool. And I'd also replace the old optical drive with a Blu-ray drive. I have old PC games that came on CDs and DVDs and would like to install them in such a rig.
m sorry to be the bearer of bad news but that waterblock leaks from corsair bad. If theres any stress on the in and out through puts to the tubing on the card it will just literally squirt out water. Major Hardware has a video of it. It happened to me too when I bought this so I sent it back.
I agree with the title, this PC is amazing. I may have missed it, but will this be your main rig moving forward?
Yes and I may eventually move everything to a normal case with better storage support and dust filtration.
Hey I think I know that guy
@Oz why you're not uploading any videos lately 😣😣😣
@@anky_but_on_steroids3750 college probably
Joshithprogamer h
This is insane. Very well done man.
11th like bruv
YES!!! HANDLE IT!
Also, this guy really took a rubber mallet to this case haha, love it.
Yep, and the hard work paid off. It looks like mine w/o RGB
Hello I need help I have a pc that should be able to stream it has a Xeon e3 1220 and an rx580 8gb with 10gb of ram is it my internet should I get a Xeon e3 1230
@@ThomasLancheros-kg1nl I don't know much about computers either but you can get help at Reddit. There is a subreddit called /buildapc, I recommend you go there
@@ThomasLancheros-kg1nl from what I see on the specs of the e3 1220 and the 1230 it wouldn't make much of a difference. There seems to only be a 100MHz difference between them. It may make no noticeable difference at all.
I can't really tell you anything about streaming though and especially not streaming on a lower budget.
@@ThomasLancheros-kg1nl bruh, if it's the v1 e3 1220 lga 1155 then you might be able to play at 1080p but you might struggle with streaming at the same time. The v1 e3 1220 is worse than any ivy bridge i5.
I liked this a lot Matt :)
matt: makes a sleeper pc
also matt: ill put a side window too
me: bruhh
This guy's is an engineer, hidden talent..
I have a Thinkstation S30. I didn't know the motherboard was ATX. That''s great, because I can just use this case if I want to when I upgrade.
I don't know why but i love the look of office computers
Man I still remember 4 years ago when he posted $200 & $300 part picker builds ...now he gets sponsors from corsair....keep going bud ....I keep loving your content more and more with each new video.
The amount of work that went into this is impressive
When I saw the case in the start of the video I knew it is going to be epic
I Agree Matt... Building into an old IBM cases can be amazing! I built into a mini form factor IBM Net Vista (circa 2005) A lot of metal grinding and fabrication and a mini ATX board will fit beautifully. Thanks for the custom video install.
mat: 'opens case' "ahhhh yes my $1000 pc in a $10 case"
Me: ah nice a computer with no GPU lets game
Me: nvm
$1000 hahahahhhahaa
More like $4000
Instructions unclear. I have the same case i opened it up, didn't look like this.
i don't think this is a tutorial with instructions, but a log of what he did
lejacobo sorry but I have to do it to you woooosh
@@lejacobo i think its a joke
@@lejacobo woooooooooooosh
dang.
Bro your bends are fire , you seem like a pro water-cooling guy keep going can't wait for the next video
For your first time it worked very well. Impressed, keep up the good work!
the passion in this project is astounding!
I rock the real S30 for my main rig and it's awesome, it isn't extreme with it's E5-2689 8c/16t, 32GB 4 channel DDR3, RX580 8GB, but for my displays it's more than enough - the legendary DELL U2410F and the still awesome DELL P992 Trinitron CRT and for gaming nothing beats that tube.
Just come across your channel and I've gotta say, I absolutely love your sleeper builds.
Add a bit of black abs plastic to the card reader openings
I was thinking black felt as it's opaque and matte.
The Title: "Sleeper Gaiming PC"
The PC: "HEY! LOOK OVER HERE!"
I love all the comments from other pc youtubers. Love the unity.
what I call a sleeper pc would be have a the right water cooler for the job having the dvd and floppies still working
It would be cool if you could get the dvd drive snd card readers to work
The cuts on your fingers explain it all. Good work on yet another great video! The PC looks amazing and a beginners guide to water cooling would be very very helpful. Have you thought of doing a budget waterloop using cheaper parts :)
It came out amazing! Great job
Bro its really amazing PC and your efforts are obvious.. the final result is mind blowing
I'm pretty sure the gpu cooler leaks. Major Hardware did a video on it.
watch jayz2cents video :D
only if you put pressure on it, go watch jayz video
@@HoloScope it leaked in major hardware system and igors too
kratek56 like they said in the video, it only leaks if you apply pressure on it and noone is going to be doing that 24/7 so it should be fine
Yeah you've only gotta worry if you're literally pushing on it constantly, considering it's a waterblock, I dont think you'd be touching it at all lmao.
Yeah the build came out really cool. Great job Matt
whats next for sleeper kind. A computer that looks old on the inside and outside but is actually op? Sleeper mini Itx Pcs? Sleeper PC but it chills at sub 0? We Shall never know...
This is insane!Well done,partner!
I love your dedication and patience.
RGB on a sleeper build is an oxymoron I think. Blingy, flashly lights totally negates the sleeper portion of the build. lol
For the card reader in the front panel you can stick a piece of black sponge or foam padding from the inside.
Or if you are looking for a working card reader, then you can pick up a usb card reader and use it with a modified front cover to fit your case.
I guess it's a tight spot to have a working card reader so put foam would make it look better.
Your first water cooled pc is a sleeper pc and it's got the top of the line spec hardware and it's in a crappy 10$ case you've got some guts, being this your first time
Ive never seen a take on "DIY" done so well
I admire this whole thing, man. The attention to detail and tenacity to make it work! Great job! Wow.
Great build, boss! I love sleepers 😁
Love it Matt! I really want to do a sleeper build!!!
As an advice
Mod the back panel of this chassis and make the psu bay down not up with an air vent below it
Not sure if you are aware or not but it has become clear that the waterblock for the GPU has a leak problem. In normal use it should be fine but do not put any pressure behind the block where the pipes connect. Corsair are now aware of the problem and are as far as I know looking to fix the problem.
I can never forget this project, love this video. Keep it up. I'll watch every video that you upload.
Again, your ingenuity and creativity is mind blowing. You never stop coming up with ideas for these videos and you cease to amaze me. This is such a cool build I watched the whole way through and am still amazed you put this together. Great video as always :)
This came out so good, man!
Loved that water cooling
amazing sleeper PC :)
Great idea with cable management shroud, will do the same for my CORSAIR SPEC-5 CASE
That's actually a very good idea for making a side window. Actually very impressed by the idea.
Now this, this is truly epic.
I don't think it qualifies as a sleeper if you can easily see inside and see the high end components.
damm you never show how to wake them up 😔
Bruh that thing is gorgeous. Really reflects the effort you put into it!
If you have the footage for the watercooling bit, please do. Otherwise I'm not gonna ask you to put in all the work if it's not heavily requested.
Usually i always skip videos long than 10 mins but damn the way you're explaining it is really good, I'd rate 10.1/10🔥
Yeeeee so this is the build from the Twitter post
congrats to your first watercooled selfmade pc. Nice pc.
One of your best videos, love your DIY skills and ideas mate!
Ngl that case is pretty cool for a prebuilt. Id rock it!
Black felt behind the front panels will eliminate the light coming thru.
Great video i love sleeper pcs. Keep it up.👍🏼
dude ! you're so creative !
can you do an upgrade to the 2nd 100$ pc
Matt, you make the BEST PC building videos on the web. Since I started watching your channel I think I could build my own PC if I wanted to. I don't think I will try water cooling though. Thanks for the great informative videos!
Congrats.
This content truly give inspirations.
That custom basement was so ingenious, the whole time at the start I was thinking how you’d manage the cables lol
Amazing build bro respect ✊
Better days by lackey inspired is literally in every TH-cam video but very sick build
Daaaamn nice build man 😦
Looks amazing but don't torque that GPU waterblock sideways at the inlet/outlet piece or else it will leak.
Tighten the GPU block screws, there is a possibility for that GPU block to leak since Corsair ducked up the design.
Cool sleeper pc
The conundrum is that yes you did a great job but again those components belong in a modern case designed with watercooling in mind. But I like to tinker and mod so I 100% understand.
Gear Seekers channel does the best pc builds on YT,, hands down.
just found your channel and subbed :)
Fantastic build Matt. Very much like you to rock a case and components like that. I'm Inspired to build something similar. Hope you use this as your daily driver for a while. Thanks for the great videos.
Amazing work Matt! The only thing i would've done different is paint the siler inside of the case (like maybe black or even white
Mad Matt did it again :P
It would be awesome if you find a way to add an identical handle for the other end of the case (would be reminiscent of some of Cooler master's 2010~ case line in that regard - gosh it makes me feel old remembering cases designs from such an era)
For your next build, use air presure testing to see if your build has any leaks. bit-tech has a great video showing how its done. Nice build overall tho.
perfectly awesome build! looks great!
case is better than mine
Why didn't you used two distinct radiators one for cpu other for gpu.
But a Bluetooth one pc start button it will be super cool to start pc from outside your house then sit and immidiately have a head shot
Hello Matt. This is another great video. Thank you for producing it, and showcasing your work. - Rob
Good for you mate it's very good but me I'm part of the 2014 windows 8 pavillion laptop 10 fps clan 👍
Awesome job ! Congrats
Hey there. I would love to have a video on your first tubing experience. I've got an AIO and I dream of doing watercooling. Take care and love from France.
How did you made the motherboard to be in place?
Hello I need help I have a pc that should be able to stream it has a Xeon e3 1220 and an rx580 8gb with 10gb of ram is it my internet should I get a Xeon e3 1230
(Edit) plZ like this I need Matt’s help
h
e
y
.
m
This is literally just a nice pc in a shit case
I like it
Love these type of builds, not really a fan of flashy cases with a rainbow coming out lol
oooooo!
A sleeper pc :)
Very well-done!
I'd like to do a sleeper rig with RGB lighting but I'm on the fence about water-cooling. Always thought there'd be too much potential for leakage and thus a bricked system. If I took a beige box and modded it this way, I'd keep the floppy drive, though. Dr. Moddenstine did a sleeper rig made from an IBM Aptiva tower and he converted the floppy drive into an SD card reader, using the disks as caddies. I thought that was very cool. And I'd also replace the old optical drive with a Blu-ray drive. I have old PC games that came on CDs and DVDs and would like to install them in such a rig.
I'm clearly impressed.
I hope that's not the GPU block from Corsair that may leak if there's too much pressure near the fittings
Isn't that the water cooler for the GPU that leaks? Seen a few reviews on it.
hellow matt ryzen 5 2600 is very good in 2020 years or upgrate to a high cpu
Question: where is the drain valve?
You're the man Matt.
What work mat is that? It looks cool.
Holy....I love the work great parts too
m sorry to be the bearer of bad news but that waterblock leaks from corsair bad. If theres any stress on the in and out through puts to the tubing on the card it will just literally squirt out water. Major Hardware has a video of it. It happened to me too when I bought this so I sent it back.
It looks really good if you spray paint the inside black
Is he using Corsair waterblock that will squirt the coolant if you twist the inlet/outlet?