Great info 🎉 regarding pcb’s …it always the bloody capacitors that fail 🤦🏼♂️ we should teach engineers to be able to rectify these small components. Save sending the boards to land fill 😅
Great content👌 I'm having drama with a Betacom 3. Changed Diverter cartridge, but heating circuit is still half open on HW demand..I'm now thinking faulty Harness🤔(i.e. is it not fully moving to HW) or Dirt in the hydrobloc...I'm stumped😮
@@warriorsofwarmth all good there, recognises demand, fires up, heat goes around Plate and down the Flow....HW is warm at best, isolate the Flow= Instantly Hot.
Nothing cleans a plate to plate like spirit of salts, but its a mild Hydrochloric acid and burns your skin if you splash it, still its great. They should put it at the front like on Viessman boilers.
I'm starting to think they've Banned it! It's listed as a chemical potentially used for (making things that go Bang) in new legislation from last year😢 Hexamine Blocks(camping fuel) are also the list. A mate of mine has the same problem trying to buy it.
Hi - Having issues with water temperature rising and lowering on the showers and hot water. Glow worm 28c. Can’t see anything on settings . Water set at 55. I guess I need to call plumber? Or is there anything in settings I can try? Thanks
@@warriorsofwarmthThank you for your answer. shall I switch the boiler off and check if that help? Or it won't change anything and I should call engineer? Anything else what I could try on my own?
@@warriorsofwarmth omg I've only just seen your reply and u were spot on mate.shame I didn't see this sooner as was without hot water for nearly 2 weeks.keep up the great work and I sure know who to contact if I have another query.cheers again for Ur reply.
Great info 🎉 regarding pcb’s …it always the bloody capacitors that fail 🤦🏼♂️ we should teach engineers to be able to rectify these small components. Save sending the boards to land fill 😅
Yes there is companies that repair pcbs, I've never used them tjough
Brilliant video.... thank u so much for sharing.... really enjoyed it 😊
I appreciate your feedback
Great video, thanks for taking the time to make it.
I really appreciate your feedback
Great content👌
I'm having drama with a Betacom 3. Changed Diverter cartridge, but heating circuit is still half open on HW demand..I'm now thinking faulty Harness🤔(i.e. is it not fully moving to HW) or Dirt in the hydrobloc...I'm stumped😮
Check demand
@@warriorsofwarmth all good there, recognises demand, fires up, heat goes around Plate and down the Flow....HW is warm at best, isolate the Flow= Instantly Hot.
Nothing cleans a plate to plate like spirit of salts, but its a mild Hydrochloric acid and burns your skin if you splash it, still its great. They should put it at the front like on Viessman boilers.
Viessmann plates do block but mainly cause they use inhibitors
I'm starting to think they've Banned it!
It's listed as a chemical potentially used for (making things that go Bang) in new legislation from last year😢
Hexamine Blocks(camping fuel) are also the list.
A mate of mine has the same problem trying to buy it.
I have F43 code flashing, what is the reason?
Hi - Having issues with water temperature rising and lowering on the showers and hot water. Glow worm 28c. Can’t see anything on settings . Water set at 55. I guess I need to call plumber? Or is there anything in settings I can try? Thanks
@@Blackthornfishery yes sounds like the plate to plate might b blocked
Hi mate, I have hot water but heating doesn't come on when set temp on thermostat. Any ideas thanks
Sorry not an engineer. Thought in case a settings fault.
Could be the diverter valve or nondemand
What to do when F13 flashing on the screen?
Temperature sensor? Maybe no airlock too?
@@warriorsofwarmthThank you for your answer. shall I switch the boiler off and check if that help? Or it won't change anything and I should call engineer? Anything else what I could try on my own?
@@karolinalilith7273 yes u should really
I have a glowworm Micra com boiler.i have heating but no hot water and no faults are showing??any help please and thank you
That's the motorised valve
@@warriorsofwarmth omg I've only just seen your reply and u were spot on mate.shame I didn't see this sooner as was without hot water for nearly 2 weeks.keep up the great work and I sure know who to contact if I have another query.cheers again for Ur reply.
@@garywilson8087 always a DM away
hello men gut work