Thanks to this video i have just installed the same sway bar on my 98 camry sport and it is a great upgrade. The back of the car feels much stiffer and the car corners fantastic. Thanks guys! There is a 24mm BTF 38 roll bar for the front.
Thanks for sharing the video. I am looking into getting the same bar and suspensions mods on my 99 Lexus ES300 as I have learned they share the same chassis components with Camrys and Solaras.
Replaced my front sway in my 98 camry using that same brand. Car remains horizontal around corners. No dive. Replaced rear shocks and links today. I think whitelaw needs to do something about the bushings and mounts the send. They're crap.
most of the parts for the XV20 camry are also compatible with the XV10, hell i bought a full set of sandgrabba mats (closest thing aussies have to weathertech floor liners) that were for the 97-01 camry and it fit almost perfectly, only had to cut a little bit of it to get it to fit under the fuel door and boot release levers.
I just found a site that has the rear sway, center away bar (under your motor) also a front sway bar brace for the bottom that connect the front two wheels and attaches to the center of the body of the car underneath. I have the trunk sway bar and front upper sway bar but I’m about to get adjustable struts from twin with new Godspeed control arms with the other support sway braces. Does the rear sway bar actually work?
So I'm just curious at about 440 on the video he makes a comment that he had to MacGyver it… If you got a second feel free to give me some detail on that what that means And I don't mean MacGyver park I know what that is ha ha ha I'm talking about the actual fix that you did to make it fit… Run down to the store and get a new bushing etc. etc.because I'm getting ready to do the exact same thing… Thank you
my car makes a little annoying clunk noise on my front end when i go over bumps. I was thinking its probably the sway bar bushings. Do you have any suggestions of what else it may be ?
xjacobx 20 I had the exact same problem but I could hear it coming from the rear. It is most likely your sway bar bushings and they're really easy to replace! Defs do it because if your bushings are out then your handling will be compromised.
My 98 v6 camry gave out it has some problem with one of the o2 sensors on the engine and the car had low power that only accelorated up to 45 or 55 mph
you may want to Instal Led interior lights ..that will be an easy cheap mood I have a Honda accord and a camry for V6 and I did a lot of work on it u just don't do videos
![GT-R Powered 240Z MakeOver [Featuring Turbo Yoda]](http://i.ytimg.com/vi/DQ7jIwqTT14/mqdefault.jpg)
![GT-R Powered 240Z MakeOver [Featuring Turbo Yoda]](/img/tr.png)
Thanks to this video i have just installed the same sway bar on my 98 camry sport and it is a great upgrade. The back of the car feels much stiffer and the car corners fantastic. Thanks guys! There is a 24mm BTF 38 roll bar for the front.
picking up my 4th Camry today, 2001 v6 xle for $650!!! I'm actually super stoked
Just ordered mines for my 2001 LE V6 5-speed. Can't wait for it to come in. Much love from the US!
I was looking for something similar to my 99 avalon and finally found something I could use thanks bro.
Where did you find it??
@@bane1this sway bar fits 2nd gen avalons
Hey thanks that's a cool idea. My Camry has to much body roll. I guess the bigger the sway bar the better.
Camry #ganggang
Definitely goes well with the new springs! Great video :)
Im definitely getting that sway bar in man,kool vids and great edits homie.
I love your vids man. I have a newer model Camry sportivo and absolutely love it. Much love from QLD
Mitchell Briggs thanks man !!
3:30 Rex teaches us how to use high-performance lube
Thanks for sharing the video. I am looking into getting the same bar and suspensions mods on my 99 Lexus ES300 as I have learned they share the same chassis components with Camrys and Solaras.
I love ur videos and watching you mod ur Camry !
:)
Replaced my front sway in my 98 camry using that same brand. Car remains horizontal around corners. No dive. Replaced rear shocks and links today. I think whitelaw needs to do something about the bushings and mounts the send. They're crap.
Hey Rex!!! I have the same one on my car and it works great!!
yeah it really does make a huge difference especially with the springs!
most of the parts for the XV20 camry are also compatible with the XV10, hell i bought a full set of sandgrabba mats (closest thing aussies have to weathertech floor liners) that were for the 97-01 camry and it fit almost perfectly, only had to cut a little bit of it to get it to fit under the fuel door and boot release levers.
That's what I have read. I have an XV10 camry coupe se and want to add the whiteline RSB. Just worried it won't fit but may pull the trigger.
@@hansfranz9914 contact Signature Swaybars in Nowra NSW, they custom make an 18MM swaybar for the XV10 series.
Nice upgrade, mine there’s not much Whiteline product for my 2016 Camry, U.S base.
I just found a site that has the rear sway, center away bar (under your motor) also a front sway bar brace for the bottom that connect the front two wheels and attaches to the center of the body of the car underneath. I have the trunk sway bar and front upper sway bar but I’m about to get adjustable struts from twin with new Godspeed control arms with the other support sway braces. Does the rear sway bar actually work?
Did you install this first or the coilovers?
Was trying to see if it’s worth getting getting strut and sway bars for my Camry, didn’t think you had a video about it for your Camry 😂
Can I use this sway bar on my 1997 V6 Camry because mine is making a clunk noise over bumps from the rear.
Where do u buy your 18" rims n tires from for the Camry n wat size tires should I buy for those rims?
I replaced my bushings & links and routed the sway bar UNDER the control arms instead of above them oops.
this is next for my Camry
Id be down to see a body kit or swap out the stop bumpers(no rice)
just got a 05 v6 camry, did you feel any difference on the road with the aftermarket sway bars?
Did you bought rear end links for your camry?
How many miles does your camry have now bro?
i drive a 2011 camry and motivated to add more on it lol
i have a 95 camry dx which sway bar would fit any tips thanks
Sounds good but... the bolts don’t fit
Now I wanna do the same to mine, might post ya a pick....
So I'm just curious at about 440 on the video he makes a comment that he had to MacGyver it… If you got a second feel free to give me some detail on that what that means And I don't mean MacGyver park I know what that is ha ha ha I'm talking about the actual fix that you did to make it fit… Run down to the store and get a new bushing etc. etc.because I'm getting ready to do the exact same thing… Thank you
ARE YOU GOING TO SELL THE OLD ONE BY CHANCE ?
Where did you get powerflex for that car :)?
If u come to Florida let me know! That way we can go to Camry meet!!
JR'S I'll make sure I let you know if I ever come down :)
Where in Florida are you located bro ? I live in GA !
Anybody else did the front? I did them but they're so thick I can't get the control arms on
why am i so good looking?
Lachy's Garage chill fam
Whose mans is this
Will this sway bar work for my 2000 le v6?
my car makes a little annoying clunk noise on my front end when i go over bumps. I was thinking its probably the sway bar bushings. Do you have any suggestions of what else it may be ?
xjacobx 20 I had the exact same problem but I could hear it coming from the rear. It is most likely your sway bar bushings and they're really easy to replace! Defs do it because if your bushings are out then your handling will be compromised.
Rex H thank you!
What is the little gold sway bar stopper piece called? Trying to find where to buy some that I can use on my stock sway bar
I wish i knew :/ try searching "sway bar stopper" or something like that
When you boys live in my area xD Driving that stock 96 celica life
My 98 v6 camry gave out it has some problem with one of the o2 sensors on the engine and the car had low power that only accelorated up to 45 or 55 mph
FSU EBK god damn hope.i don't get that
Rex H luckly some bitch rear ended me and i got 2400 through the insurance mate cheers from California
FSU EBK hahahah lucky as! Hopefully I'll get to come down there one-day if the channel takes off
Rex H fuck yeah man i got a friend in Australia he drives a red S15
i would love an s15, they're so damnnn niceeee
do MR2 vs. 330I
So when’s the 2J install?
haha i wish
Nothing better than a thick one.......apparently 😁
Big Keg HAHAHAH so true
You've inspired me to do something with my interior Keg
I didn't really explain it that well but I will on another panel...... that indent around the cloth is nasty lol
I should do that on mine!
you may want to Instal Led interior lights ..that will be an easy cheap mood I have a Honda accord and a camry for V6 and I did a lot of work on it u just don't do videos
Great Idea!
No more new videos?????
JR'S soon man soon
Me gustaría que tus videos tuvieran los subtítulos
Put a lip kit on the Camry
100% will happen
Cars