for anyone watching this, it takes 30 seconds to pop the grill off, clips hold it in. The chrome piece and nissan logo can also be unclipped in another 5 seconds from the black mesh piece.
Looks good. Hell maybe you didn't wanna pop the grill off. But you got patience with the paint. Most people would have tried to do that in one coat. Lol. Great job
I dug the video. I did the same, taking the grill wouldve been easier but at the time I didnt know how to. From my experience the more coats the better coverage and easier to peel off when you want to do so. Great music btw. Anyone know who is the artist?
Great Video Man. Very Informative.. How is the Paint Holding up After all this Time?? Is the Paint Good?? OR Does is Fade Away?? Please Advise, as I'm thinking Of Doing Same to My Xterra.
@@kingrodriguez5207 well.. if you guys noticed he didn't really do actual "coats", he did "partial coats". Looks like he was just being really safe to ensure he did "run" anything, doing really light coats.
Ok so leave like a Square around it so you have an easier way to peel rather there trying to peel off smaller pieces of the dip? Am I getting this right?
Man that's a lot of extra work and a high risk for over spray for something that takes less than five minutes to pop off to paint. Just FYI for anyone that doesn't know the only tool you need is a slotted/flathead screwdriver, there are six push pins on top(just lift up with the screwdriver), and then simple lift tabs (or sometimes there are also plastic square head screws seen from the front of the grill) that need the screwdriver to be rotated to allow the grill to slide out.
yo pal i have a 2015 nissan frontier sv crew cab and have been looking to do the same thing... yours looks awesome any tips or issues that you ran into? I'm litter nervous about doing it so any advice would be greatly appreciated
+obrien184 just make sure you leave a little edge don't try to line up the tape perfect. The last dip will peel right off the edge and make a cleaner edge. other than that its really easy.
Yeah now I'm looking at the xtra large ugly chrome grill on my 2014 black Silverado ..I'm for real painting black between bumper headlights and that ugly xtra large grill ...its going black some how some way
Plasti Dip doesn't last. Why is it that no one post vids of how long it last. That's because it last like shit. Especially on the front end of a vehicle. Be there done that. Waste of money and time. Looks good thought right after you do it.
Just careful when washing car. It's designed so you can peel it off if you don't like it. I've used this on three cars now without problems apart from door handle cause my key catches it.
for anyone watching this, it takes 30 seconds to pop the grill off, clips hold it in. The chrome piece and nissan logo can also be unclipped in another 5 seconds from the black mesh piece.
I was thinking the same😂
Why are you watching the video if you already know how to do it? 🤣🤣
@@JaviSailorMauto teach dumb people
@@JaviSailorMau Why not?
Looks good. Hell maybe you didn't wanna pop the grill off. But you got patience with the paint. Most people would have tried to do that in one coat. Lol. Great job
why in the world would you not just pop the grill off? You made this way too much work for yourself...
Great job, looks good.
how is it holding up today is any of it chipped off?
I dug the video. I did the same, taking the grill wouldve been easier but at the time I didnt know how to. From my experience the more coats the better coverage and easier to peel off when you want to do so. Great music btw. Anyone know who is the artist?
yes the more coats the better with plasti dip
Music sucks
Logic - The Come Up
Great job ... I plan on doing the same thing ...
What is the result of it now 4 years later? Reapplication? Once a year or?
now do a review on it 4 years later :) curious how this holds up
kamadomatt ham he sold this clapped fuckin pussy truck
@@EliteGamer21 got something against frontiers?
gonna do it tomorrow. Thank you for posting!
What type of black paint you used?
Great Video Man.
Very Informative..
How is the Paint Holding up
After all this Time??
Is the Paint Good??
OR Does is Fade Away??
Please Advise, as I'm thinking
Of Doing Same to My Xterra.
Nice video but would have been so much easier to remove the grill it only tskes 5 minutes
Gavin Richardson true that! and also he put tooooooo many coats i did mine and rear bumper as well and it only took like 3 coats lol, Rockies!!
DoItYourSelf /HazloTuMismo yup 3 coats that's it 1-2 light and last one a good strong coat
@@kingrodriguez5207 well.. if you guys noticed he didn't really do actual "coats", he did "partial coats".
Looks like he was just being really safe to ensure he did "run" anything, doing really light coats.
RPD FIX haha since it’s the front grill 8 coats is the recommended number😉
RPD FIX lol actually no you did it wrong 1 light coat and 5-6 heavy coats lol rookie
Nice truck bro, I have mine the same
Cold weather, man - bad for application, for good job it wants 70+F. Have to warm up the cans even for warm weather. But thank you for video
I use hair dryer between coats and no problem even in cold weather.
Ok so leave like a Square around it so you have an easier way to peel rather there trying to peel off smaller pieces of the dip? Am I getting this right?
+obrien184 Yes Exactly do that it will be a lot easier.
Great work. Thinking about doing the same.
How many cans did he use ?
Can i have the link to where you buy this plasti dip? I don’t know what brand to use from amazon. Thank you. Truck looks awesome by the way!
amzn.to/2KvGoQg for the black
amzn.to/2Mz1HBl for the clear coat
You'll probably need 4 cans + 1 or 2 of clear
Tyler Monagan thank you! Do you do clear coat after black?
Why deal with overspray on the truck? It takes like 2 minutes to remove it...
All vehicles are different some you can't take off easy.
Man that's a lot of extra work and a high risk for over spray for something that takes less than five minutes to pop off to paint.
Just FYI for anyone that doesn't know the only tool you need is a slotted/flathead screwdriver, there are six push pins on top(just lift up with the screwdriver), and then simple lift tabs (or sometimes there are also plastic square head screws seen from the front of the grill) that need the screwdriver to be rotated to allow the grill to slide out.
Awesome thanks for the tips
yo pal i have a 2015 nissan frontier sv crew cab and have been looking to do the same thing... yours looks awesome any tips or issues that you ran into? I'm litter nervous about doing it so any advice would be greatly appreciated
+obrien184 just make sure you leave a little edge don't try to line up the tape perfect. The last dip will peel right off the edge and make a cleaner edge. other than that its really easy.
Well done...6 coats minimum.
I was thinking the same!
. гораздо легче снять решотку . там пластиковые держатели . 3 минуты нужно чтоб снять . Покрасить на столе и опять ее прикрепить
why didnt you just take it off? its like 5 pins
Some grills are a pain in the butt to take off. I always keep mine on as its done in a few hours.
Plasti dip looks good but it fades fast
do i want shine or no shine XDD
Midnight edition lol..
Yeah now I'm looking at the xtra large ugly chrome grill on my 2014 black Silverado ..I'm for real painting black between bumper headlights and that ugly xtra large grill ...its going black some how some way
the paint will stick longer if you scuff the chrome first
Easier to remove grill js
Plasti Dip doesn't last. Why is it that no one post vids of how long it last. That's because it last like shit. Especially on the front end of a vehicle. Be there done that. Waste of money and time. Looks good thought right after you do it.
Mark Fasulo so what would you use I'm trying to do the same but I'm scared to try plasi dip
Its held up for 2 years on my front bumper with minimal chips. Even if it does chip its plasti dip spray another coat on and your good
Just careful when washing car. It's designed so you can peel it off if you don't like it.
I've used this on three cars now without problems apart from door handle cause my key catches it.
HORRIBLE texture warm the bottles next time
That is the texture, it's like a rubber it becomes smooth by the end.
Do it all the time.