Such clean and efficient work. I am amazed more by your technical skill and precision with each video I watch. If I didn't have such a knack for learning and doing things myself, I would definitely send off to you for repairs. Maybe one day I'll be beyond my capabilities. 😂 Have an awesome day.
A true brilliant workmanship quality right here. Also, a huge Eid Mubarak shoutout to you and your family and may Allah shower you all with great health and prosperity.
The DC jack/charging connector should not be soldered straight on to the mainboard! It's a component that does/will/can take a battering and should be easily replaceable. I've done (replaced) it twice now on my 6/7 year old dell XPS and it requires nothing more than a screw driver!
That's when laptops manufacturers still had in mind repair ability. Now days modern laptops are soldered to reduce size and cost. They try to force you into buying a whole new motherboard if a component that is soldered goes bad.
I remember we didn't have to worry about a simple connector before and my laptop was working for more than few years without replacing it The more we go forward the more fragile things has become
QUESTION: even though you use Low Melt Solder, don't you still need to reach the melting temperature first for the Lead Free Solder? I assume once they are both molten they mix into anew alloy? Just curious. Thanks.
Yes exactly. You need to apply the soldering iron to the joint so unleaded can melt and mix with Low melt solder, otherwise low melt will just be laying on top of hard unleaded and it won't do any good.
I have the MSI Crosshair 16, it uses the same type of power connecter. I have tried to be very careful with the laoptop plugged in, I can tell the power connecter is a weak spot and figured at some time I would have to replace it.
my son has a msi gaming laptop, its my 3rd time replacing the charging port. He's now paying for the repairs and making me rich so I'm not angry on him tripping over his cord all the time.
Msi laptops have good quality motherboard board and usually wont brake and we see in this video it was only connector issue ,, but asus 💀 old subscribers to this channel know well 💀💀
the chassis on those types of laptops are always so horrid. Ive dealt with a couple of them before and have always had some sort of structural failure in the hinge or screen
I fixed one of these too, the problem is i get it repaired and it turmsnout someone ripped the wifi port off the board. Ill try to pop a new one by an adaptor into the spare nvme slot
MSI sucks. Especially their motherboards. I made a huge mistake in buying the B650 Tomahawk. Absolute garbage. I will never buy MSI products ever again.
He’s not interested in sponsoring visas. He’s gone over this a million times, you have to be local and already have authorization to work in the United States.
"You can't melt anything with Fahrenheits" !!!!
That was awesome!
Got my nf.mini and my low melt solder. desoldering charging ports/usb/usbc conectors are a breeze. love your content Alex!!!!
This man can repair anything electronic, I'm sure his customers are very satisfied. 🎉
Its because he uses a big tip! They are left very satisfied
Better Than Factory !
we need t-shirts like this!
Such clean and efficient work. I am amazed more by your technical skill and precision with each video I watch. If I didn't have such a knack for learning and doing things myself, I would definitely send off to you for repairs. Maybe one day I'll be beyond my capabilities. 😂 Have an awesome day.
A true brilliant workmanship quality right here. Also, a huge Eid Mubarak shoutout to you and your family and may Allah shower you all with great health and prosperity.
The DC jack/charging connector should not be soldered straight on to the mainboard! It's a component that does/will/can take a battering and should be easily replaceable. I've done (replaced) it twice now on my 6/7 year old dell XPS and it requires nothing more than a screw driver!
That's when laptops manufacturers still had in mind repair ability. Now days modern laptops are soldered to reduce size and cost. They try to force you into buying a whole new motherboard if a component that is soldered goes bad.
I unlock my phone , you tube was already on , then Pow 30sec ago ! Good luck on this one
Eid Mubarak🌙
Please forgive my ignorance but I am new to your channel and to the repair can you tell us what microscope your using
I'll have to remember to use water when I take my next shower !!
I remember we didn't have to worry about a simple connector before and my laptop was working for more than few years without replacing it
The more we go forward the more fragile things has become
Sung to the tune of Puff the Magic Dragon: "Low melt the magic solder lived by the bench...."
Big bos should wear TShirt with "bos of all bosses" line at the back😊
Your work is hard to tell wealth it's a replacement or factory much love from zambia 🇿🇲
Super professional in what you do; including being hilarious, with little effort. God bless. Jokes almost always ship out ; “same day.”
The quality of that wick and flux is amazing! I can never find that anywhere else near me.
QUESTION: even though you use Low Melt Solder, don't you still need to reach the melting temperature first for the Lead Free Solder? I assume once they are both molten they mix into anew alloy? Just curious. Thanks.
No you just need to kick off the reaction of the 2 metals combining into a new amalgam. It can happen at lower temperature depending on the chemistry.
Yes exactly. You need to apply the soldering iron to the joint so unleaded can melt and mix with Low melt solder, otherwise low melt will just be laying on top of hard unleaded and it won't do any good.
that laptop looked like it took a beating
I have the MSI Crosshair 16, it uses the same type of power connecter. I have tried to be very careful with the laoptop plugged in, I can tell the power connecter is a weak spot and figured at some time I would have to replace it.
Ustam bende kombi kartları tamir etmeye çalışıyorum harikasın kolay gelsin
BETTER THAN FACTORY! Easy, i understand you, im an expert too, im still licking 9v battery to know if there is something left... 🙃😘😚
That's by far the fastest way to test batteries. Just don't try it with 9v power supplies! 🤣🤣
@@BSnicks I avoid 120amp lab supply, just licking 9v battery 😗
FYI - I've noticed the lip sync is slightly out on your recent videos, both on PC and smart TV app.
@@1newme425 Yes, all other YT videos are fine.
Better Than Factory Sir
Hi Alex, hows the leg now? All ok?
my son has a msi gaming laptop, its my 3rd time replacing the charging port. He's now paying for the repairs and making me rich so I'm not angry on him tripping over his cord all the time.
I only buy certain things from NRF now and thick solder wick is one of them
Looks like that power connector had a bad day last night!
BOSS I AM FROM INDIA I AM REGULARLY WATCH YOUR VIDEOS....
Same
nothings better then a better then factory joint
Wondering if that wick is magnetized ?
Msi laptops have good quality motherboard board and usually wont brake and we see in this video it was only connector issue ,, but asus 💀 old subscribers to this channel know well 💀💀
Akhi, you need to clean your PC Desktop I think 😂
3:59 That's what she said
the chassis on those types of laptops are always so horrid. Ive dealt with a couple of them before and have always had some sort of structural failure in the hinge or screen
" Taking a shower with air. You're gonna clean nothing " ... Hold my beer 😆
I wash myself with a rag on a stick.
Great work as usual.
BISMILLAH. The magic of low melt solder.
❤ ur " yes yes" and the happy smirk
i see a new video, i thumbs up
Fahrenheits are small, while Celsiuses are big. For big brains.
Goddamn Fahrenheits, don't melt nothing!
I fixed one of these too, the problem is i get it repaired and it turmsnout someone ripped the wifi port off the board. Ill try to pop a new one by an adaptor into the spare nvme slot
BIG BOSS T-SHIRTS. when can we have them by??
Boss please make video Desktop Mother Board also
00:09:38 minutes to completion. 😊
All I see is Jon Stewart fixing electrical stuff 😀
Regards to big boss 🌹
Eid Mubarak Alex. Did you do Qurbani ?
Another video. Great!!!
That is a very nice shirt!
The pointer on the upper-left corner 😭
Nooo! OCD Triggered cannot unsee Proceed to rock on floor saying "Hold the door!".
Big boss
Boss of all bosses
Let me switch tips!!! That’s what I said to her🤣
MSI sucks. Especially their motherboards. I made a huge mistake in buying the B650 Tomahawk. Absolute garbage. I will never buy MSI products ever again.
Nice
Awesome ✌🏻✌🏻✌🏻
How do I get you to fix my phone for me by shipping I'll pay for it but Is that possible
When are leaving California? Everyone seems to be on the way out.
It’s not about the tip, it’s how you use it😅
❤❤❤
🎉
Boss I can understand English I cannot speak properly..
👌👍👌👍
90% of this channel feels like rtx 4090 and laptop repair. Why do people buy faulty products?
You want to say that you always buy something that dosent get faulty ever?
The S stands for $**t
You do work for the CIA dont you?
First!
Do you want employees to work? I have experience in repairing and certificates in electronics, and I am also from Lebanon.
if you're local (around California) then you can contact him
@@maklogetrich2378 no i wish
He’s not interested in sponsoring visas. He’s gone over this a million times, you have to be local and already have authorization to work in the United States.
Eid Mubarak and Love from Pakistan.