Replacing And Setting Throttle Position Sensor on Toyota Starlet GT 4efte EP82

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 22

  • @epwiring
    @epwiring 8 หลายเดือนก่อน +2

    That's a really good demonstration of setting the TPS 👌

    • @shedworxxx
      @shedworxxx  8 หลายเดือนก่อน +1

      Thanks Brother. I try my best 🙏🏻 hopefully it’s not on the car for too long 😉

  • @BrettSauve
    @BrettSauve 3 หลายเดือนก่อน

    I be looking at plenty of videos of all types in case i be needing to work on my Glanza V. With every 'new to me' vehicle i tend to dilly dally and keep purchasing maintenence parts until i can also find paper manuals and online videos so i can make sure of what im doing and if i can skip a step to make it smoother work. Thanks for posting your videos.

    • @shedworxxx
      @shedworxxx  3 หลายเดือนก่อน

      @@BrettSauve thank you, really appreciate the kind words.

    • @BrettSauve
      @BrettSauve 3 หลายเดือนก่อน

      ​@@shedworxxxIf I recall correctly those specificactions for that TPS are close to the AE86. interesting.

  • @NMG-Shawty
    @NMG-Shawty 5 หลายเดือนก่อน

    When you say back it off what do you mean? Are you sliding the sensor away from the actual throttle flap?

    • @shedworxxx
      @shedworxxx  5 หลายเดือนก่อน

      @@NMG-Shawty can you post a time stamp?

    • @NMG-Shawty
      @NMG-Shawty 5 หลายเดือนก่อน

      @@shedworxxx around 6:18 it’s when you adjust it for continuity

    • @shedworxxx
      @shedworxxx  5 หลายเดือนก่อน

      @@NMG-Shawty yes so start at “I” (open circuit) and then move the sensor until you have continuity. You want the sensor positioned at the first point of continuity (switch just closed).
      When it’s set correctly the tps switch should open in sync with the throttle flap itself.

  • @officialtimcruz3077
    @officialtimcruz3077 8 หลายเดือนก่อน

    Cool content as always man.Can I ask what catch can setup you have ?

    • @shedworxxx
      @shedworxxx  8 หลายเดือนก่อน

      Thanks brother 💪🏻 it’s a smooth rocker cover with AN fittings connected to a China spec can. I fitted a sock air filter for bike carbs to the top as the one it came with wasn’t clearing the bonnet.
      Previous I had a RW developments one on the car but it had to go to make space for the coolant bottle…

    • @officialtimcruz3077
      @officialtimcruz3077 8 หลายเดือนก่อน

      @@shedworxxx Thanks man. I was thinking of getting an RWD one but as you said they seem to take up a lot of space in the bay. Do you have a link to the china spec?

    • @shedworxxx
      @shedworxxx  8 หลายเดือนก่อน +1

      @@officialtimcruz3077it’s from max speeding rods but I wouldn’t recommend it… a knock off cusco one would be better but RWD is definitely the best option available atm.

    • @officialtimcruz3077
      @officialtimcruz3077 8 หลายเดือนก่อน

      @@shedworxxx Thanks. Also with the td04 rebuild you did with the hybrid kit, was it Mamba rebuild kit you used?

    • @shedworxxx
      @shedworxxx  8 หลายเดือนก่อน +1

      @@officialtimcruz3077 I think it was just a Chinese kit. Got it from eBay.

  • @cjbarnes2010
    @cjbarnes2010 8 หลายเดือนก่อน

    This is massively helpful, I have a GT and and the idle just keeps hinting from 1800 - 2200 rpm, im hoping thos resolves it

    • @shedworxxx
      @shedworxxx  8 หลายเดือนก่อน +1

      You’re welcome bro and thanks for watching. Be sure to check that you don’t have any vacuum leaks first.

    • @cjbarnes2010
      @cjbarnes2010 8 หลายเดือนก่อน

      @@shedworxxx it's been a mind field chasing leaks and finding a new TPS is near impossible, you got super lucky having a new OEM one

    • @shedworxxx
      @shedworxxx  8 หลายเดือนก่อน

      @@cjbarnes2010message me on instagram I might be able to help you find one.
      It fixed a problem I was having with the ignition timing on my car.

  • @fc1jz51
    @fc1jz51 4 หลายเดือนก่อน

    Hey ya, sup bro, my 4efte is running rich and black plugs please help.