How To Start A Car Without A Key | How To Hotwire A Car

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ก.ย. 2024
  • How To Start A Car Without A Key | How To Hotwire A Car
    jpautofleet.com/
    Josh from JP Auto & Fleet Services is going to teach you how to start a car without a key. Now, let’s be clear, this is not to be used for nefarious purposes and stealing cars.
    This technique is to be used when you are stuck and in a bit of trouble as you will see in this video. It is also used for diagnostic purposes such as those shown in the video as well.
    Let’s get down to business. I received a call from a customer of mine, his engine light started blinking on his car, flashing going crazy while has was on the highway. Luckily, he was able to get off the highway because his car died.
    He actually had to get off the highway and got to a store that was close by to me so I went to help him out. The Kia van wouldn’t crank over but I was able to get it started and back to my shop.
    The battery in the van was completely dead and the starter wouldn’t crank at all. I’m going to share with you exactly how I was able to get the van started and over to my shop in Lake Dallas, TX.
    Diagnosing the inside the car first, the lights are showing on the dashboard with the keys in the ignition but no “click-click” when turning the key. Now, I’m going to look under the hood.
    I knew the battery was toast so I had brought a new battery to the store where he pulled over and installed that prior to getting it started. I needed good voltage to be able to do all the diagnostic testing.
    I took my power probe, which can send power and ground to any accessory, and tested the battery I installed. It tested at 12.3 volts and that is enough battery voltage to crank this vehicle over.
    The van should have been at least turning over and cranking if not starting so I went to the next stage. Before I get into the starter, I’m going to start with the starter reply.
    One way to check the starter without getting into it fully is to send voltage down to it with the power probe. By sending voltage directly to the starter via the starter reply it cranked right up and started.
    What this tells us is we don’t have a bad starter. The next stage was to test the alternator. Using the power probe again, the alternator was at 12.1 volts which is below what is needed to start a vehicle. The acceptable range for an alternator is 13.3 - 14.8 volts.
    This brings us now to one of two things, we either have a bad alternator or an electrical issue somewhere that is not allowing the battery to charge properly. My bet on this is that we have an electrical issue.
    Several indications show me that this is a rust bucket vehicle. I came across a break in the wire on the fuel injector. I also came across several places with open copper wire and this can result in short circuits.
    Important note: this video is for diagnostic purposes only, we are not trying to steal cars here. However, a lot of times, this particular technique showing how to start a car without a key or how to hotwire a car is needed to rule out a bad starter, a faulty ignition, or troubleshoot an alternator battery charging issue.
    JP Auto & Fleet Services
    4 Tanglewood Drive
    Lake Dallas, TX 75065
    214-836-9333
    goo.gl/maps/Jf...
    • Automotive Service Sho...
    #howtostartacarwithoutakey
    #howtohotwireacar
    #jpautofleetservices

ความคิดเห็น • 119

  • @stephmaines3555
    @stephmaines3555 2 ปีที่แล้ว +20

    This really works. Again, not for stealing but great when you have a crazy person take your keys thinking they own you.
    Thanks, thanks... Have a Great day, be Happy and Safe. Love one-another....

    • @loragoff1969
      @loragoff1969 ปีที่แล้ว +1

      Good point!

    • @msmlsbcb
      @msmlsbcb ปีที่แล้ว

      ❤❤❤❤❤❤❤😊

  • @loragoff1969
    @loragoff1969 ปีที่แล้ว +7

    This is really cool. I lost my car keys and missed a very important event. Still looking for my keys so it’s really nice to know that I can drive my car. I wish I had thought of this before that event. Thank you so much for this video!

  • @stevenwatson3496
    @stevenwatson3496 7 หลายเดือนก่อน +3

    Yes this will activate the starter, but without the key on, the fuel pump or ignition system won’t be on either.

  • @hvaciqguy2655
    @hvaciqguy2655 หลายเดือนก่อน

    Damn son!!! You reckon that little tool makes you like, certifiably genius?
    Golly man, that gave me a feelin like, as if, if I speak it? So it shall be, or some shit… could get used to that… listen to this shit, I’m stranded here at a 711 in okc. I went in, laid my keys down? Walked away for a sec? And one of the employees stole my keys😭🤷‍♂️why? No good. Why? I don’t understand some people. Now I’m forced to hoy wire my daughters 2008 Chevy cobalt… help me out bro, please!!!

  • @jessicajackson6263
    @jessicajackson6263 4 หลายเดือนก่อน +1

    On the starter relay 87 doesn't close 30 power is sent through 85 and 86 which energizes a coil that magnetically pulls 87 and 30 switch closed which allows power to go to the starter I'll explain ... 87 is constant power key on engine off and when you turn the ignition switch to start it sends power to 85 through 86 that energizes a coil that magnetically closes the switch between 87 and 30 then power is sent to the starter a relay is a switch that controls a bigger switch
    Just to clarify I'm Adam Jackson ASE certified technician on my wife's account just realized that LOL

    • @jessiewilson7590
      @jessiewilson7590 2 หลายเดือนก่อน

      So which ones you need to jump together

  • @lammy8967
    @lammy8967 4 ปีที่แล้ว +5

    Man I don't know what but, I like this guy. His facial expressions and eye gestures show some type concentration I can't explain.

  • @devinjones4563
    @devinjones4563 2 หลายเดือนก่อน

    Question, i have a 2004 f250 5.4l, i replaced the ign switch, and o burned out relay... What else could i be looking at?

  • @Viper87th
    @Viper87th ปีที่แล้ว +4

    Not everyone got a probe tool, so if you dont have, you can just jump connect pin 30 and 87, with ign on , just for the info

    • @jessicajackson6263
      @jessicajackson6263 4 หลายเดือนก่อน

      It's me adam again you could take the plastic cover off the relay and manually work the switch inside the relay

  • @dragona.wizard7376
    @dragona.wizard7376 หลายเดือนก่อน

    Hey crazy eyes how you been man. I haven't seen you since we were locked up

  • @NewLife4GVN
    @NewLife4GVN 11 หลายเดือนก่อน +1

    "You had to let him know you're not stealing the car cuz he knows me." 😂

  • @B00tlegsamurai
    @B00tlegsamurai 2 ปีที่แล้ว +1

    Have a really stupid question I am new into this scanner world. Is there a scanner that will start cars? Or try to crank it over / mimic the key. So I can see if it's worth getting a key made for the car?

    • @B00tlegsamurai
      @B00tlegsamurai 2 ปีที่แล้ว

      I have a power probe hook
      I use the powering the starter, but some times I can't use this technique. With out mimicking the key. Didn't know if there is a scanner out there that is able to start a car with out the key or mimics the key

  • @nofatchicks2315
    @nofatchicks2315 2 ปีที่แล้ว +1

    Love the video just liked And subscribed. Somebody tried stealing my 06 ford freestar van and destroyed the immobilizer module and ignition plus the alarm wont shut up now. Is there anyway to disconnect the pats system I dont want to fix it because every time i loose the key it costs me $200.00 bucks. I lost the hand held last year so the alarm is worthless to me, i spoke with 4 guys at the ford dealership, they referred me to another guy from their collision center, he referred me to car toys. The closet thing that I've seen to a solution is if i get a bypass module. Can i use that trick with the relay pins to start it and does it have to be a certain tool or will anything work? Sorry to ramble on and bombard you with questions. This is my work van and I'm loosing a lot of money not be able to use it. Thanks any suggestions from you or anyone else would be greatly appreciated.

  • @dennishollenbeck5924
    @dennishollenbeck5924 ปีที่แล้ว

    This video is supposed to show how to start a vehicle without keys. So to that issue it sucks

  • @caseyjones8410
    @caseyjones8410 3 ปีที่แล้ว +4

    I loved it learn something new everyday

    • @JPAutoFleet
      @JPAutoFleet  3 ปีที่แล้ว

      Glad you got some nuggets bud 👍

  • @CaptainMSH
    @CaptainMSH 2 ปีที่แล้ว +1

    I recently lost my key (pontiac g6 gxp 2009) in a house fire and i was wondering if there was any information that you could tell me that would be useful?

  • @ultramanxk7
    @ultramanxk7 ปีที่แล้ว +1

    My computer car reads service, even though I did the service but the computer won't reset, so therefore wouldn't start, so I got hot wire it, to make it work again. Great video.

  • @corrustofthehive
    @corrustofthehive 2 ปีที่แล้ว +2

    Anyone know what tool he used to send the voltage down the line?

    • @KarasCyborg
      @KarasCyborg ปีที่แล้ว +1

      That's a "Power Probe" there are various versions. You press a button and it will supply 12v from the battery directly to the location to bypass wiring that might be bad. Try amazon or harbor freight tools.

  • @tteuvky
    @tteuvky 3 ปีที่แล้ว +1

    How did the car started without fuel pump working??
    The key must be turned to On position to activate fuel pump.
    Please someone explain thanks

    • @JPAutoFleet
      @JPAutoFleet  3 ปีที่แล้ว +1

      The key was in the vehicle turned to the on position. This was more of a demonstration on how to check a starter and starting system electrical circuit.

  • @scowlsmcjowls2626
    @scowlsmcjowls2626 4 หลายเดือนก่อน

    What about the steering lock

  • @joeblow8431
    @joeblow8431 3 ปีที่แล้ว +1

    How did you unlock steering wheel

  • @jennyjogladney3111
    @jennyjogladney3111 ปีที่แล้ว

    Hi i need your help i have a 2004 chevy colorado . My truck keys àre gone ? For two days ive misswd . Y doc app. I called the dealeship to ask how much it would cost to make me another key and they said this was the first year they chipped them they won't make me a new key without a key fob and a new starter and it's going to cost me $300 and I've been sick I just don't have it I need my truck to run it's got half tank of gas in it omigod I live out in a rule area I live in Oregon you sure seem like an awful nice guy I don't have one of those around I have a 26 year old son but he works full-time and because I raised him right d I would be ever grateful

  • @kristollawson3608
    @kristollawson3608 ปีที่แล้ว

    I lost the keys to my Push start 2014 Kia Optima Ex gdi. I don't have $200 to get a new key fob made. Will this work to start my car to get my car home until I can get a new fob made?

  • @homayon2011
    @homayon2011 4 ปีที่แล้ว +1

    Is this trick for any car?

  • @whiterose20237
    @whiterose20237 หลายเดือนก่อน

    YOU DON'T BLINK....

  • @lisaslay-z8342
    @lisaslay-z8342 2 ปีที่แล้ว

    Will tjis work for a car with a dead battery? I own it so idc if i kill it lol. Please help. Thanks!
    P.S.- ain't no Kia either lol

  • @timothykarn3081
    @timothykarn3081 ปีที่แล้ว

    Theft system light,it cranks good, I got the wheel unlocked o k, I lost my keys gotta get home

  • @williamgray4238
    @williamgray4238 2 ปีที่แล้ว

    Hey I took my ignition sylinder out.i tried to start it with a screw driver but won't start.2005 Ford Taurus

  • @charlenarosas830
    @charlenarosas830 ปีที่แล้ว

    How do you bypass the system when you lost your key to a Buick lasabera 1993

  • @davecornelisen6961
    @davecornelisen6961 ปีที่แล้ว

    I have a question I have a 04 dodge dakota 4.7 hem it no keys I want 2 start it or at least tune it over at least before I put a key switch in it I herd 2 hook up a starter switch u can't on that moter because the starter plugs in is it true I haven't been under the truck yet 2 see it was or not

  • @noreltucker4567
    @noreltucker4567 4 ปีที่แล้ว +7

    hot damn! great style! entertaining and informative and fun. you have a gift!

    • @JPAutoFleet
      @JPAutoFleet  4 ปีที่แล้ว

      Thanks brother! I appreciate the kind words very much👍

    • @dalewasko6943
      @dalewasko6943 3 ปีที่แล้ว

      Envoy start with no key

  • @laurahudson1272
    @laurahudson1272 11 หลายเดือนก่อน

    I have a 98 lincoln continental that I lost the key to how can I get it started to move it without the key

  • @johnmartin3517
    @johnmartin3517 ปีที่แล้ว

    could you make one on how to bypass the switch and power up the fuel pump on a chevy 1998 seirra i think its grey +12 and thick black wire not a thin one. starts and runs but pump stops when the key is released.

  • @leechion2933
    @leechion2933 ปีที่แล้ว

    Dude why do you look like Jamie Madrox from Twiztid

  • @kieratalks2662
    @kieratalks2662 3 ปีที่แล้ว +1

    works for all cars or just certain ones??

  • @shannondonley1716
    @shannondonley1716 9 หลายเดือนก่อน

    I need your help

  • @JuanCisneros-j1i
    @JuanCisneros-j1i 9 หลายเดือนก่อน

    Does this work for my g 6 2006 Pontiac i lost my keys

  • @vn978
    @vn978 5 ปีที่แล้ว +1

    How to start a car without $200.00 power probe!!!

    • @JPAutoFleet
      @JPAutoFleet  5 ปีที่แล้ว +3

      Power probes arent that expensive anymore. You can also use a jumper wire. Thanks for the view!

  • @victormugo8130
    @victormugo8130 ปีที่แล้ว

    Thank you alot I have learned what I never knew, indeed you are a professional mechanic, kudos 👍

  • @tacocharlie9715
    @tacocharlie9715 10 หลายเดือนก่อน

    Anyone know if this works when you’ve lost the key fob?

  • @MrMrBigro
    @MrMrBigro 3 ปีที่แล้ว

    Ok and when it's a 2001 ford ranger and there is no key the ignition is on position will it crank it over?

  • @noellefritz5678
    @noellefritz5678 4 ปีที่แล้ว

    I'm here because I'm writing a BOOK, google search watchers

  • @felixortiz4695
    @felixortiz4695 ปีที่แล้ว

    Same year 2008 saturn astra and everything

  • @kristiegilley333
    @kristiegilley333 ปีที่แล้ว

    How do you start a 2003 ford trust without key

  • @felixortiz4695
    @felixortiz4695 ปีที่แล้ว

    Hello I have the same problem can you help me

  • @andreayanochko4758
    @andreayanochko4758 4 ปีที่แล้ว +1

    Your presentation was excellent.

  • @abdelaaladawi5701
    @abdelaaladawi5701 ปีที่แล้ว

    Grat work bro .
    I like it .
    Keep going 💪.
    You are a professional man .have the knowledge and skills

  • @Craig-i6y7l
    @Craig-i6y7l 8 หลายเดือนก่อน

    What are pins 30 & 87 for

  • @chadmaxwell7134
    @chadmaxwell7134 2 ปีที่แล้ว

    now does that work with the key with the chip

  • @timothykarn3081
    @timothykarn3081 ปีที่แล้ว

    I am so screwed here ! Help !

  • @davidthompson62
    @davidthompson62 2 ปีที่แล้ว

    How do you jump start an old car from the starter to the battery on classic cats?

    • @Viper87th
      @Viper87th ปีที่แล้ว

      right here : th-cam.com/video/46atY0OlVQc/w-d-xo.html

  • @bty1471
    @bty1471 3 ปีที่แล้ว

    Title Didn't match

  • @YoDaddy-u9r
    @YoDaddy-u9r ปีที่แล้ว

    How do u turn it off after

  • @courtneykh24
    @courtneykh24 3 ปีที่แล้ว +2

    I lost my 2016 Sierra truck keys recently. Any tips on how to crank it without damaging anything in the steering/ignition area. Please and thanks 🙏

  • @matthill9340
    @matthill9340 3 ปีที่แล้ว

    I am having this same issue. What ended up being the culprit on this particular vehicle. Just looking for some more ideas

    • @JPAutoFleet
      @JPAutoFleet  3 ปีที่แล้ว +1

      A bad engine control module and corroded wiring. A bad combination that took a lot of diagnostic time

    • @matthill9340
      @matthill9340 3 ปีที่แล้ว

      @@JPAutoFleet got my car to start up and run after getting one of the ECUs flashed.

  • @tonykollar6870
    @tonykollar6870 3 ปีที่แล้ว

    What happens if I don't turn my ignition and go straight to relay to connect pins?.. Will it turn over and fire up engine?

    • @JPAutoFleet
      @JPAutoFleet  3 ปีที่แล้ว

      If it's an older vehicle possibly but most newer vehicles need the ignition voltage to start

    • @davidcadwalladersr6262
      @davidcadwalladersr6262 2 ปีที่แล้ว

      @@JPAutoFleet p

  • @justinhensley2290
    @justinhensley2290 3 ปีที่แล้ว

    Hey Josh I've lost both my keys on my 2003 Ford ranger and I'm sitting here with like 60 bucks and locksmith wants 150. I was suppose to be moved 3 days ago and here I sit is there anything I can do to bypass the anti theft on my own vehicle and get past this Ford pats system so I can get the hell out of this spot I'm stranded in?

    • @JPAutoFleet
      @JPAutoFleet  3 ปีที่แล้ว

      No sory brother

    • @mr.gilson2894
      @mr.gilson2894 2 ปีที่แล้ว

      Damn man. I'm in the same situation. Best I've been Ble to find is remove the ignition switch and use a screwdriver

    • @Daniel-xx9bw
      @Daniel-xx9bw ปีที่แล้ว

      @@mr.gilson2894 iv also lost my key to my 2001 Ford Torres how do I bypass the anti theft system

    • @Daniel-xx9bw
      @Daniel-xx9bw ปีที่แล้ว

      Please help

  • @mysterion9050
    @mysterion9050 2 ปีที่แล้ว

    METH(ODMAN)

  • @abdelaaladawi5701
    @abdelaaladawi5701 ปีที่แล้ว

    *great

  • @tteuvky
    @tteuvky 3 ปีที่แล้ว

    You mean to pin 30 with 87 or 30 with anyone if we are using a wire?

    • @JPAutoFleet
      @JPAutoFleet  3 ปีที่แล้ว

      Correct

    • @tteuvky
      @tteuvky 3 ปีที่แล้ว

      @@JPAutoFleet
      What correct 30 with 87 or 30 with anyone or both way are correct?

  • @sebalnakji
    @sebalnakji 3 ปีที่แล้ว

    Thank you!

  • @kingbobo4729
    @kingbobo4729 3 ปีที่แล้ว

    u

  • @paularata3945
    @paularata3945 4 ปีที่แล้ว +1

    You DID steal that car. There is no reason the customer wouldn't give you the key.

    • @JPAutoFleet
      @JPAutoFleet  4 ปีที่แล้ว +5

      If you paid attention to the video youd realize the key/ignition was faulty & not working. No crank/no start smart guy 👍. Only way I could start it was with the method I show in video. Atleast until I repaired the fault. Thanks for the view though! Hope you subscribed 😉

  • @xavierarellano7242
    @xavierarellano7242 4 ปีที่แล้ว

    That was great info brother thank you

    • @JPAutoFleet
      @JPAutoFleet  4 ปีที่แล้ว

      Glad it helped bro👍

  • @Gundisalvus_97
    @Gundisalvus_97 4 ปีที่แล้ว

    Great video

  • @ryandeegan8185
    @ryandeegan8185 3 ปีที่แล้ว

    I lost my key and my keypad to my 2004 Ford expedition how do I get my vehicle off of anti-theft mode using a screwdriver

  • @brianmontgomery8268
    @brianmontgomery8268 4 ปีที่แล้ว +2

    I have 2 queastions.
    1) If you are able to start it without a key, how would you shut it off?
    2) When at a junkyard is there a way to spin the motor over without a key? I would like to know if it makes any noise while spinning over before I buy it.
    I will have a jump box with me.

    • @JPAutoFleet
      @JPAutoFleet  4 ปีที่แล้ว

      This more a technique to test cranking ability/starter condition and not to get the car running. But it will get it started on many cars. Mostly older vehicles prior to 2002. With newer vehicles often the anti theft and pass lock systems will prevent it from actually running. To answer your junkyard question it depends if the engine is still wired to the vehicle. If it is then do the technique in the video. If not, send 12 volts to the starter via your jump pack. This should atleast get the engine to turn over. Which is ultimately what you want to verify (the engine not being locked up). Hope this helps

    • @stephendees291
      @stephendees291 4 ปีที่แล้ว +1

      @@JPAutoFleet no it didn't, how do you turn if off? Need answers, not a history rundown.

    • @Evan_Floyd
      @Evan_Floyd 4 ปีที่แล้ว +2

      @@stephendees291 pull the EFI relay on the fuse box. It'll shut off the fuel pump and the car will shut off.

    • @gretchenbridges1661
      @gretchenbridges1661 2 ปีที่แล้ว

      Need. To start 2005 Buick without key

    • @Viper87th
      @Viper87th ปีที่แล้ว

      @@stephendees291 if you have the key, just turn it off like normal, if not, just take off the main relay for example,

  • @timothykarn3081
    @timothykarn3081 ปีที่แล้ว

    Cranks won't start,my 98 Cavalier

  • @Affalterburch
    @Affalterburch 10 หลายเดือนก่อน

    great explanation!

  • @kayleenmathews6189
    @kayleenmathews6189 2 ปีที่แล้ว +2

    I just thought I'd show some love by saying thanks for sharing the knowledge that u have gained ! Not only this, but also the quality of the video 👌 .. yes the image came in clearly but thats not the quality that I'm pointing out. I'd say that ur ability to keep what u where teaching sweet and simple.. the cameras eye showed me exactly what I needed to see and it matched up with the choice of words that u used to explain each step to fallow to complete a task was well spoken.. vocabulary kept my attention because u where nit changing topics and u didnt start telling me ur whole life story .. i mean ive watched videos that are so dragged out that i have not much desire to finish watching the video. And i think its because u have a quality and strength to be a teacher! All im saying is im thanking Ģªhəđ right now and I appreciate u ! Thank u very much! Now imma probably going to watch every single video that u have put on Here!
    I haven't looked yet! But hey Josh what would be the best material and what would be the best solution for cleaning inner the hood and the underside of an eclipse mitsubishi!?!? And are u able to look at a car and see if part under the hood are not it's original parts?! 🤔

    • @JPAutoFleet
      @JPAutoFleet  2 ปีที่แล้ว

      Thank you for the kind words! Yes I do virtual auto appointments via zoom. If you'd like to set one up DM me via Instagram @jpautofleet.