I've used a 220cdi dual mass flywheel with the pressure plate from the 320cdi (rated to 550nm) .on my 300td om603 with an hx35 and 7.5mm dieselmeken. Has been running for about 10k km by now, works great and cheap as well. plug and play
More these english videos, please! Could you make an video at your turbo/supercharger setup because i'm doing the same on my w202 om605 with edc pump dsl1 controller. How your boostpipes goes?
The Audi clutchplate fits! See my instagram for a picture of the testfit ✌ But you might actually want to machine the surface for the pressure plate half a mm down as the clutch plate is a little thinner than i expected
Wie teuer ist denn das gesamte kupplungs setup? (Ohne bearbeitungskosten) ich überlege derzeit zwischen dem sprinter kupplungs set und dem 260mm/700nm kupplungsset von thekangaroosteam (450ps om606)
Is the diameter of the starter ring gear the same as the original for OM605 and OM606 so you can use the same starter motor without problems? Do you know how thick the fywheel is from the friction surface to the crankshaft muonting surface?
So i have. DPUK budget flywheel and clutch kit I want to only change the clutch as the flywheel fits good. Will this volvo pressure plate and TTRS diisc work on it ?
Is there any kind of clutch disk and pressure plate that can handle +350hp that can fit into om605 with 200d flywheel and 270cdi 6-speed manual gearbox? Or do you need different flywheel/modifications for the 200d flywheel?
Hallo, kannst du mir ein paar Fragen beantworten. Motor OM 606 / Getriebe 711.113 (10Zähne) welches EMS und welche Druckplatte müsste ich nehmen? Wie kann ich dich kontaktieren?
@@CZSMotorsport can you please go into more detail about this linkage change? The cable setup is not ideal for my w124 conversion and I have read that shortening it is a pain.
@@CZSMotorsport That 712 is used in the 940 Turbo. That pressure plate is a direct fit to the Sprinter SMF flywheel stock threads and the 3 guide spigots? Sprinter flywheel need machine to flat surface, but best machine 0,5mm more to best clamping force? Will be interesting know 712-707 Sachs pressure plates bolt pattern measures, and the 765 from E34 M5 BMW, this last can be 2,5-3mm height the friction surface up, looking photos in Google, all for 240mm disc.
Thanks for this great video! I have Nissan 180sx with m104turbo engine and 716.654 gearbox. Now I know more about the clutch. Can you write your actual Instagram account?
Thankyou, this is such valuable information. Please keep uploading stuff like this! Things like this make my current m104 build much easier!
I've used a 220cdi dual mass flywheel with the pressure plate from the 320cdi (rated to 550nm) .on my 300td om603 with an hx35 and 7.5mm dieselmeken. Has been running for about 10k km by now, works great and cheap as well. plug and play
W203 320 cdi?
@@joshuahien8796 yes
@@paulzarth5349 what power do you have ?
@@ukaszupina2661 hasn't been on the dyno yet, but the pump is set to 150cc. Maybe around 300hp and 500nm
Hello Paul. Do you know if this setup (220 CDI wheel and 320CDI plate) will fit OM605 as well?
More these english videos, please!
Could you make an video at your turbo/supercharger setup because i'm doing the same on my w202 om605 with edc pump dsl1 controller. How your boostpipes goes?
Thank you for that feedback! I will make a detailed video in english on the whole setup of my car soon :)
Thank you for sharing all this info so clearly you are a talented man for sure 👍
Sehr gutes Video, passt das auch in den M111 2.3 Kompressor ?
The Audi clutchplate fits! See my instagram for a picture of the testfit ✌ But you might actually want to machine the surface for the pressure plate half a mm down as the clutch plate is a little thinner than i expected
I would like to know the dual-mass flywheel from Audi
Wie teuer ist denn das gesamte kupplungs setup? (Ohne bearbeitungskosten) ich überlege derzeit zwischen dem sprinter kupplungs set und dem 260mm/700nm kupplungsset von thekangaroosteam (450ps om606)
sprinter flywheel as in the flywheel from a Mercedes sprinter bus?
Danke für das informative Video!!!
Thank so so much for all the help and information ypur the real mvp!!
Great video🤩
Thanks for all the info.. you know if this flywheel has the same diameter for a m112 engine on a slk320 6 speed
Hello, you have an link or an website to the flywheel and pressure plate from the beginning op the video? Great Video!
I was in Gambia
Which clutch disc are you sure will fit with this flywheel and pressure plate?
Is the diameter of the starter ring gear the same as the original for OM605 and OM606 so you can use the same starter motor without problems?
Do you know how thick the fywheel is from the friction surface to the crankshaft muonting surface?
Hello, does fit the original rev counter from the w124 in this setup thanks alot
Does the single mass sprinter flywheel have the 5 teeth for the edc pump sensor pickup? Or is this only for mechanical pumps?
Only for mechanical pumps and dsl
So i have. DPUK budget flywheel and clutch kit
I want to only change the clutch as the flywheel fits good.
Will this volvo pressure plate and TTRS diisc work on it ?
Could you tell me please what exactly model of the sprinter engine the singlemas flywheel comes from ? Does it have the number on it ?
Hi, will this transmission work with original clutch master cylinder from w202 , or I have to install one from w211? Thanks
Hi, it will work with original w202 master cylinder
Can you help me through. Chain Tensioner Dismount /mount on om605.? Please
Is there any kind of clutch disk and pressure plate that can handle +350hp that can fit into om605 with 200d flywheel and 270cdi 6-speed manual gearbox? Or do you need different flywheel/modifications for the 200d flywheel?
Hello I have 5 speed manual transmission, this flywheel and clutch works?
Can you use full stock sprinter kit without changing pressure plate and disc for m111? Does the timming marks are the same?
No the Timing ist different
hi I have a m103 engine I got one of this flywheel that you show here but it is not working it is brushing on the sensor
Can you help me my car is 6 cylinder been sickness is automatic now I want to
So with the audi plate it will be fully unsprung?
Great info
did you try the ttrs disc to see if it works ?
I am new at this have 1999 om606 I would manual trans what gind please do I need to buy adapter thks onyrs where could I buy this trans
Hallo, kannst du mir ein paar Fragen beantworten. Motor OM 606 / Getriebe 711.113 (10Zähne) welches EMS und welche Druckplatte müsste ich nehmen?
Wie kann ich dich kontaktieren?
Does anyone know what a 716.640 6speed came out of and what is it rated to ? Many thanks
same as 603 also?
how many hp can it hold?
What is the original application for the pressure plate you are showing? Also what did you do about the shifter linkage?
Hi, it's originally used for volvo, not sure the model. For shifter linkage i removed the cable and used connecting rods with ball joints
@@CZSMotorsport Thanks for the info. I read somewhere that a modified bmw linkage could also be used
@@CZSMotorsport can you please go into more detail about this linkage change? The cable setup is not ideal for my w124 conversion and I have read that shortening it is a pain.
@@everettnewtonable I will on the next video 👍
@@CZSMotorsport That 712 is used in the 940 Turbo. That pressure plate is a direct fit to the Sprinter SMF flywheel stock threads and the 3 guide spigots? Sprinter flywheel need machine to flat surface, but best machine 0,5mm more to best clamping force? Will be interesting know 712-707 Sachs pressure plates bolt pattern measures, and the 765 from E34 M5 BMW, this last can be 2,5-3mm height the friction surface up, looking photos in Google, all for 240mm disc.
Hi the transmission and clutch is working for OM603?
Yes , it will fit.The 603 and m103 have same flywheel and clutch.
Could you please answer me with a link to the flywheel? Thank you
Hi, just search for this number on ebay: BOL-G061224
Sorry if im dumb but would this fit the 717.413 transmission ? its an dual mass originally and and sits in my 93 s124 om605
Hmm i think it should, but better to check whether the gearbox has a long or short input shaft.
Its fit?
Please I need your help I need your area
Will this setup work in a m111 gas engine with the 6 speed? I read different things and can't find a direct answer
Yes it should work
Does this have the proper 60-2 timing teeth?
@@michaelmayfield9901 yes
thank you for doing the videos in English!
What number is the flywheel?
BOL-G061224
Ok thanks
How abaut daily driving smf flwheel with clutch disc without springs? Driveble?
It will be quite a pain in traffic and will rattle a lot. I drove that kind of setup in a big city daily for 2 month. Wouldnt do that again.
Yeah it's automatic but I want to change it for manual
How are you doing sorry big man
Мне похрен, у меня на 603.960 стоит корзина и сцепа на 228мм,а ты загоняешься, тем более с двухмассовым маховиком,, который не каждому по карману
This is single mass flywheel
Thanks for this great video! I have Nissan 180sx with m104turbo engine and 716.654 gearbox. Now I know more about the clutch.
Can you write your actual Instagram account?
@w202_performance