I love how vividly clear you made it as to how hurt you could be if it got out of whack. I've actually seen what happens to a bell housing when a clutch assembly fails. Not pretty at all, and I knew the person driving the truck it happened in. He got injured but was lucky enough that he didn't lose any limbs. Absolutely agree spinning bits Loctite non-spinning bits anti seize and torque down
You like your legs kids? I know I do, but if you don't, here's how you lose them. 😂 I love your content... Today in Luke's shop we're taking about transmissions, mission critical components, and health hazards related to rapid unscheduled disassembly. Really though, I feel like I'm just hanging out with you while you answer a question I asked.
Love this video, loaded with tons of info as usual. Can you please do a teardown comparison between the OM606 vs OM648 like you did with the 606 and the M57? Do your adapter kits work with the OM648?
hi , i would like add 40/50 HP to my OM606.961 , i dont wanna have black smoke in exhaus just more power and engine sound still quiet , and i dont wanna make a lot of change (keep the engine stock with IP Pump) you have any suggestion to do this ? Many thanks Cdlt/BR
Nice video and great information. I do like my legs attached as well. 😂😂 Any updates on the Patrol giveaway? I don’t use any other social media platforms to see your other posts.
So where would i pull the rpm signal, tps and boost signal for the turbolamik controll if im running one of your mechanical IJ pumps ? I just ordered the IJ pump amd a bunch of other stuff
Great vid. Question: any advice / comments on engine mounts when repowering a full size chevy pickup with a 606 that had an LS or a SBC? Do you know if the mounts need te fabbed or can / do you sell those??
Proper kit from a true pro! I have a 1972 Ford LTD land yacht. But has a 400 smog motor. I know what needs to be done to get over 500 hp. Do you do a adaptor plate for the Ford 400 transmission.
My dream is to drop one of your 606 engines in my Land Rover. She's got over 206k miles and I've always wondered what a bit more power would feel like.
HI. CAN YOU MAKE ME A 606 WITH 250-297 HP TO FIT 6 SPEED MANUAL FOR MY DISCOVERY 3. THIS FOR MY TRIP AROUND THE WORLD. LET ME KNOW WHAT THIS MAY COST ? REGARDS , COLIN
Can I mate the OM606 to my w460 1983 GE280 5 speed manual transmission? Do I need an adaptor or will it fit? I want to put an HX35/40 on it. Is it strong enough by itself or do I need a new clutch and/or flywheel? If so which one? Thanks in advance, your video’s are very helpful and Im gonna buy your g wagon snorkel intake one of these days.
Similar question, as found below, but this time from the U. S. I love to hear the engine rattle, but I also want it to run smooth, efficient, a bit extra power (maybe 250hp to 300hp), very dependable, no black smoke, mate up to an 8HP70 trans, and ride off into the next 500 km, without much likelihood of fail!
I know this is completely off topic and other than being diesel wizards I know you are also Mercedes wizards and your adapter has made me think to ask here. I have a w211 e320cdi straight 6 like the one you got 400hp out of. My car won't drive anymore no matter what gear I select. D or R or tip tronic. Is there anything it could possibly be before I swap my gearbox. I have another waiting to go in but I'm worried if I get it changed and its still not fixed. Any advice or information would be greatly appreciated. Thank you and absolutely love your work and really hope to get my car to you for work in the future
Dont say the word flexplate its making me sad😂 my 380 bhp 335d has been off the road for a year due to flex plate rattle and cant bring my self to do it on my drive💀 im an ex transmission specialist and know its going to be days of swearing and oily bloody nuckles😂 gonna bite the bullet and pay someone with a ramp to do it soon
I love how vividly clear you made it as to how hurt you could be if it got out of whack. I've actually seen what happens to a bell housing when a clutch assembly fails. Not pretty at all, and I knew the person driving the truck it happened in. He got injured but was lucky enough that he didn't lose any limbs. Absolutely agree spinning bits Loctite non-spinning bits anti seize and torque down
Such detailed, concentrated nuggets of gold for anyone trying to find their way through this kind of conversion!
You like your legs kids? I know I do, but if you don't, here's how you lose them. 😂
I love your content... Today in Luke's shop we're taking about transmissions, mission critical components, and health hazards related to rapid unscheduled disassembly. Really though, I feel like I'm just hanging out with you while you answer a question I asked.
Another fantastic video, always a pleasure to get more informed on your version of gearbox installation. 😊
You've definitely convinced me, I need one of these engines in my 1984 BJ42 Toyota LandCruiser. I'll be in touch.... Unfortunately, in Australia
Love this video, loaded with tons of info as usual. Can you please do a teardown comparison between the OM606 vs OM648 like you did with the 606 and the M57? Do your adapter kits work with the OM648?
hi ,
i would like add 40/50 HP to my OM606.961 , i dont wanna have black smoke in exhaus
just more power and engine sound still quiet , and i dont wanna make a lot of change (keep the engine stock with IP Pump)
you have any suggestion to do this ?
Many thanks
Cdlt/BR
I wanted to give this video multiple likes...TH-cam won't let me.
Nice video and great information. I do like my legs attached as well. 😂😂
Any updates on the Patrol giveaway? I don’t use any other social media platforms to see your other posts.
Best in the game 606 god's 😎💪
Luke, Thank you!
Do you have or can you make an adapter for a ZF 8HP trans?
Will the Lady kit fit a 02 Range Rover?
So where would i pull the rpm signal, tps and boost signal for the turbolamik controll if im running one of your mechanical IJ pumps ? I just ordered the IJ pump amd a bunch of other stuff
Great vid. Question: any advice / comments on engine mounts when repowering a full size chevy pickup with a 606 that had an LS or a SBC? Do you know if the mounts need te fabbed or can / do you sell those??
Good day how much for a kit for a Land Rover discovery 2 v8 auto want to put a 605 in
Proper kit from a true pro! I have a 1972 Ford LTD land yacht. But has a 400 smog motor. I know what needs to be done to get over 500 hp. Do you do a adaptor plate for the Ford 400 transmission.
Send me the box and I will build you a kit.
Can you make a video about om602 5 cilinder tuning?
Have you got any om605s for sale. The 1s i can find seem to be missing most the parts. Need to get rid of this cheese block in the engine bay
Would love to have the money to put a 606 into my 1996 automatic land cruiser
Very nice , hey Luke any adapter for 606 to Nissan patrol zd30 auto transmission?
How about to the RFE Dodge/Chrysler?
Hello is it possible to put a 606 on a w163 fully working?dashboard ,gearbox etc?
Thanks
Will the OM606 bolt on directly to a W126 OM603 trans?
the second you go offroading with a om606 the starter will fail,
make shure all seals have a little bit of silicone on them ore dirt will get in
How bout a kit for the Tremec 5 spd?
Is that Bob Lutz from Street Outlaws?
It is indeed.
When is your pump going to be available
They are you have to email us.
You and Millyard need to build something, some version of a Morgan 3 wheeler, F1 style
My dream is to drop one of your 606 engines in my Land Rover. She's got over 206k miles and I've always wondered what a bit more power would feel like.
Hey sorry abit off topic but what do you think of om602? its off a ssang yong
HI.
CAN YOU MAKE ME A 606 WITH 250-297 HP TO FIT 6 SPEED MANUAL FOR MY DISCOVERY 3. THIS FOR MY TRIP AROUND THE WORLD.
LET ME KNOW WHAT THIS MAY COST ?
REGARDS ,
COLIN
Is the NA manifold better than the turbo one in terms of cylinder filling?
Hi Dieselpump
Could help me with wanting to fully manual a 722.6 auto
Buick-Oldsmobile-Pontiac= BOP (Cadillac too)
Hello , thanks for the guild. How can buy one for Nissan y60
Someday when i have a lot of money i hope these people are still in bussines.
Hi sir. What happened in the competition to win the Nissan Patrol? I bought a shirt from your online store.
This, who won??
Not drawn till end of the month
Love the information
Can I mate the OM606 to my w460 1983 GE280 5 speed manual transmission? Do I need an adaptor or will it fit? I want to put an HX35/40 on it. Is it strong enough by itself or do I need a new clutch and/or flywheel? If so which one?
Thanks in advance, your video’s are very helpful and Im gonna buy your g wagon snorkel intake one of these days.
👍
Similar question, as found below, but this time from the U. S. I love to hear the engine rattle, but I also want it to run smooth, efficient, a bit extra power (maybe 250hp to 300hp), very dependable, no black smoke, mate up to an 8HP70 trans, and ride off into the next 500 km, without much likelihood of fail!
I know this is completely off topic and other than being diesel wizards I know you are also Mercedes wizards and your adapter has made me think to ask here. I have a w211 e320cdi straight 6 like the one you got 400hp out of. My car won't drive anymore no matter what gear I select. D or R or tip tronic. Is there anything it could possibly be before I swap my gearbox. I have another waiting to go in but I'm worried if I get it changed and its still not fixed. Any advice or information would be greatly appreciated. Thank you and absolutely love your work and really hope to get my car to you for work in the future
Dont say the word flexplate its making me sad😂 my 380 bhp 335d has been off the road for a year due to flex plate rattle and cant bring my self to do it on my drive💀 im an ex transmission specialist and know its going to be days of swearing and oily bloody nuckles😂 gonna bite the bullet and pay someone with a ramp to do it soon
Will you guys ever make a GM or Ford manual trans adapter? Something to mate up T5s, TKOs, TKXs, T56 etc.
Great vid as usual. 👍 I will be using your products on a W123 project in the future.
Om606 in a R170 SLK! That would be sweet. If it fits
These Videos are my evening safe space.
Another great video mate.