So Much Money WASTED On A 3D Printed Warhound Titan For Warhammer 40k!
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- When I was sent the files to 3d print this imperial knight warhound titan for warhammer 40k I thought it would be simple. This has been the most expensive 3d printing failure to date so many mistakes were made.
/ battlebrothersam
Subscribe to make sure you see part 2 where i finish the build and paint this beast of a model.
This video was inspired from channels like Midwinter Minis, Goobertown Hobbies, WintersSeo, Say Hi Paul, Squidmar Miniatures, Miniac Painting, Black Magic Craft, Real Terrain Hobbies and Geek gaming scenics, Vince Ventruella and James Wappel.
![Shareปลาวาฬ ส่งท้าย SS1 พาเปียโน ขึ้น Ferrari ก่อนไปขาย แลก Nissan l [Nickynachat]](http://i.ytimg.com/vi/KAknGkTNIvg/mqdefault.jpg)
If you want to support the channel you can pledge to my Patreon and get access to my discord server 🙂 www.patreon.com/battlebrothersam
with printing the warhound, what parts are hollow or is it all solid
its good to see peoples mistakes as alot of the 3d printed videos make it out to be easy. looking forward to part 2
Yeah you don't really see too many mistakes anymore but this couldve been avoided if I watched more videos on how to build it 😂😂😂
wow i mean ok i get it you went through alot of trouble but still brother wow. The final prints are mint and the over all model is amazing. I bet if you did do another it would go much smoother. So glad i got a printer and found this channel, i just dont need GW anymore. Sam your knocking it out the park buddy.
Thanks brother, yeah I know i could do another one easily which I guess I'll have to do but a chaos version 😁😁😁 brother 3d printing has made this hobby so much more enjoyable
GW Psykers finally cursed Your printer . Now You have to sell Your soul to the gods of plastic
😂😂 Never!
Err! Did you not hollow the large pieces to save resin/weight?
Similar thing happened to my warhound, not enough resin to print the whole top part so I ended up splitting it into two pieces. Next major error was not hollowing it and the third was it’s unstable pose.
That all came together to make a really top heavy Titan that eventually came crashing down. Hollow your models people.
Now stockpiling resin for a warlord.
Sounds like me and you have similar plans brother 😁😁😁 the unstable pose is currently my issue, I've semi resolved it by literally screwing the feet to a base.. But now the feet are cracking 😂😂 fml
Honestly for a first attempt not bad. My first "large" print was a Chaos war mammoth (Known as Disorganized snuffaluffagus) and It took me 3 attempts to print the body the third being mildly scuffed and some of his coat was poking out like blades. However, at that point I said screw it and made him work. However, I printed 2 more since then and they all came out a breeze. Don't give up, when you are feeling up to it print off another one.
Thanks for your comment. That's a relief to hear that it's not just me lol I seen that war mammoth from the great EmanG. I definitely said screw it to this 2nd body to make it work as it's a little scuffed in places but I will do another one but the chaos version
Yo, how do you find all the code names?😊
You'll hate me for saying this, but in the journey along 3D Printing- shit happens!! Night time paranoia of resin running out tends to lead to sleepless nights, getting up to check vat levels! As for assembling issues, it's a case of dry-fit first and checking balance when larger pieces go on top. Action poses are best done one leg at a time (and add armour plates to make sure you have clearances to attach later!!) Study your desired poses to learn what others did first (can avoid blunders by learning from theirs!) Multi-part printing projects are a blessing and a curse in equal parts! Even when I get a stl, before I print, I will "assemble" all the parts in Meshmixer to be sure of scale, prior to printing (it's also a good way to see your pose come to life at no cost...yet lol) At least you started with a Warhound! I just did 2x Nemesis Warbringers at once! (Tip: Never do that because when you finally see the task you've set yourself up with, it's enough to put you off!! lol)
Finally, don't throw mis-prints- they could be useful for wrecks on bases.
Haha your just speaking the truth brother! Lessons were learned from this. I usually use 3d builder to assemble models if I'm not sure but obviously not in this case lol
@@battlebrothersam Oh I've used this method to print some great ruins bases too, like a Warsuit astride a destroyed Death Guard Leviathan Dreadnought.
@@odin741 now that sounds cool! I plan to use the failed warhound body for terrain or maybe the base to a warlord 😁
@@battlebrothersam I did an Ebon Keshig leaping over a wrecked Kataphron Destroyer. I also took time to create marine corpses, some impaled on blades that I can add to bases too (my fav is one slumped on its knees propped up by a powersword lol)
Nice!!! I need to improve on my bases yours sound so much more involved than my basic ones 😂😂
Did you use the dead marines stl file from cults? I keep meaning to print off a load of them for projects
what mic are you using? if I may ask?
Getting ready to print the warhoud myself... any suggestions on orientation and supports? Printing on Anycubic Mono X
Thanks and love the channel
Where did you find the model, I would like to give it a try
A sub sent me it! If you search teliri warhound you should get similar models
Where do you get the titan from?
Any advice on support the main torso? I may have a bad doggy printing at the moment and my god the body is ruining my wallet!
I've just started printing my first imperitor titan leg. I think I have enough experience to make it work.... God I hope. Not nervous at all. Thing about huge models is it's just fucking hard to make work. I've printed big, and I've printed multi part. But I've never printed multi part where each part was the full size of my printer. Problem with things like this is just the smallest mistake is amplified tenfold by the sheer stupidity of the very concept. It's a very fun stupid, but goddamn is it stupid. I will know if my first part print even worked in like.... 8 hours.
make sure to level the table where you put the printer to the micron its very important for big models cause you can tell if the balance is wrong..i work in Mclaren i print car pieces and we actually print them on vacum cause they need to be that level
Its a nice model though. But somewhat expensive mistakes :(
Before you look at the Warlord Titan you need something else.
3 more Wahounds, 2 Reaver, and then you try the big boy. So you can have a full "lance" of Titans :D
If I wasn't a pirate and bought the official model and made the same mistakes I honestly would've gave up 😂😂 Looking at some reaver files funny enough, I was thinking of having a line up of titans similar to warhammer worlds display but 3 warhounds 2 reavers? You mad lad I need to do it now damn you! Although should I do 2 chaos warhounds and 1 chaos reaver? 😁😁😁
@@battlebrothersam I think both ideas are great you should do both.lol
It will end in 1 of 2 ways
1 you will be victorious with the deadliest army ever for the price of a imperial knight.
2 you will end up on the golden throne dribbling in the corner of the room throwing dice against the wall.
Ether way a great youtube vid for me to watch. lol
@@chris-ri1zu Hahaha I think it will be the 2nd option let's be serious 😂😂😂😂
@@battlebrothersam Making these mistakes with a og model would have been a substantial waste of Money. I'd punch myself for that.
Technically nothing stops you from printing both sides in Titan form. Still cheaper than og Models but still an investment. Let alone the Time you have to put into it.
But it would be a really nice Project, i think. If you have the Space for that ofc.
And not to burden you with even more stuff but optional: how much Skitarii do you think all these Titans need ;P
@@S1lentJo space is a serious issue at the moment because I don't want to put him on any shelves incase he Swanton bombs off and through the table 😂 but your right it would be cool... I guess I could find space on the floor 😂😂😂 oh now skitarii is something I've thought about for a while and station forge have some cool models! Your a bad influence for my resin crack addiction sir 😂
I can’t find the Warlord Titan STL anymore
the Warlord or Warhound? GW have done a few banning waves recently
Добрый день. Пишу на русском языке поскольку плохо владею английским. Не могли бы Вы поделиться сайтом или исходными материалами для конкретно этой модели "Warhound Titan" ? Да, в сети есть исходники "Lucius Wardog Titan", но меня интересует тот, что Вы собрали "Mars Pattern Warhound Titan". С уважением, Ваш зритель.
Thank god for Google translate 😂 it is the telari warhound file I know it was uploaded recently but taken down again
@@battlebrothersam Понятно...Спасибо за уделённое Вами мне внимание. Ждём новый видеоотчёт по покраске миниатюр.
Yeah but you see inquisitor, I only said he should corrupt the titan to chaos an-
😂😂😂😂😂 All must fall to CHAOS
Out of interest without the balls up how much resin would you estimate this thing takes?
1.5 ltrs which is nothing when you think about it lol
@@battlebrothersam Yea great stuff. I was wanting to have a go myself but I've only got about 2.5litres of resin left and can't be putting more cash into it for a while.
Would hate to think I got half way through 😂
Well that's more than I started out with lol just remember to fill up the vat when it's the body printing 😁
@@battlebrothersam Did you hollow the big pieces?
Yeah i think I hollowed most of it except the legs
All user errors sorry dude, I've ballsed up enough times. No curse just half assed it lol
😂😂😂 100% user error and lack of preparation lol
dry fit dry fit dry fit
Hey man! I sent you a business email regarding this video, would you mind checking it out? thanks!
Replied brother 👍
Easy and simple Mr gw manager, if Warhammer would have a normal price I wouldn't have had to buy a 3d printer. Now I agree with brother Sam, I've saved bucket loads of money and there's no way back! The problem of most companies that hit the stock market, profits become their only objective and they lose it