If you want to support the channel further please pledge to my patreon. www.patreon.com/battlebrothersam Donate to the project and get your own personal model in youtube history! www.paypal.com/donate/?hosted_button_id=4DEDDFSBRDT3Q
Joined the discord earlier this month when I got back into the 3D Printing hobby. Not sure how I lived without it before. Thank you, Sam, and everyone else who makes this community possible!!!
Holy Crud........ Never thought you would call me out brother, but I'm humbled. And also impressed as heck that you are bringing this Omnissiah creation into existence. Keep working thru the obstacles..... A wise old Master Chief once said: calm waters never made for a skilled sailor. Continue on course Brother Sam.
@@skankhunt_-42 If he were to do that the STL would get taken down within days, if it hasn't already. Games Workshop protects their IP like it's their precious one ring.
If you ever have to break a super glue bond in future, it’s easier to break the bond with a short sharp application of force rather then gradually increasing the force. Putting the item needing to be broke apart into the freezer for a few hours and the super glue becomes even more brittle making it easier to break the bond.
Im glad that its such a supportive community - and while I feel the dedication has a sad story behind it - you've put that memory into something tangible that the family may revisit - and that's a really nice thing to do. Im very hyped for the chaos titan legion. Hope Liam's family are able to find some peace 💖💜💙
You are single handedly the reason I had my Titans 3d printed. I just had a Ta'unar done, it turned out gorgeous! I can't stress enough how much better some of the 3d prints are compared to the FW stuff.
Looks great man, amazing turn in the project. I personally do Print -> hot water -> clip supports -> washing -> RINSING with fresh spirit(it really gets these tiny white flakes disappear. Great job, keep up the good stuff.
if its any reassurance dude, i feel like half the draw of this chsnnel is you being "in over your head", you're not the most experienced hobbyist but that makes your experiences more relatsble and compelling ^^ These are big projects but you give me, and i imagine many other people too, aspirations to tackle the challenges you face in the name of hobbying fun
Yes YES!!!!! It is completed. Resin for the resin god !!!! I’m glad you were able to complete it and those makercults look sick. I don’t understand what’s going on with little Liam ?
I dunno if you agree here but I make sure supports never touch when I'm printing Sam mate. That may be why a lot of stuff get's pulled off from suction force, I dunno what happened to you but it's maybe a thing to consider. printing bigger, heavier stuff is a pain so best to separate it best you can xD
@@battlebrothersam I thought that too but as long as they aren't touching I think most print alright. With bigger things though you are right, you need heavies. I'm, so paranoid now and over support. The trick is always orientate iot so you can hide most big or medium supports. A bit of m,illput and methylated spirit can fix the holes once sanded anyway xD
That trick works on mainly specific types of super glue, mainly insta-cure/cyanoacrylate or other curing type glues. They are the most common types but for anyone wondering if it's not working, it's probably a different type! (The actual reason why is as the glue cures it forms a crystalline matrix, and freezing it causes water to get into the gaps of said matrix, which break apart as it solidifies, making the contact very brittle!)
Use putty, or the reusable painting/poster tack, or anti earquake stuff. Little blobs of sticky reusable putty for holding things on walls or keeping stuff on shelves if they shake, get the good stuff and you can use it in place of glue on bigger models like this to make sure they go in that way first, it's not a perfect fit, being a bit thicker than glue, but helps a ton in previewing ideas, especially when kitbashing. I use "Aleene's Instant Tacky" craft putty, and "QUAKE HOLD!" The first one is better on the residue side, it's less for working on parts before painting, while the second has very slight residue if you don't clean it up or wash aftewards, but is a bit stronger of a hold for bigger or heavier parts.
Sunlu ABS-Like has been an absolute godsend! Found it far better than Anycubic/Elegoo equivalents… both printability & when you bounce it! The beige colour was £33.95/2kg on Amazon prime day, think grey is back up at about £50/2kg sadly!
Sunlu ABS-like was amazing when it was under £20/kg. I think it was £17 a bottle at one point. Then Jayo ABS-like kind of filled that niche. I can't find anything equivalent that's cheap now.
For small parts, you might want to try small mesh laundry bags. Use a binder clip or something to hang the bag on the side of your wash. Works well for me.
Sunlu Standard has a lower viscosity than the ABS like, so you can actually reduce your cure time by .1 or .2 depending on your printer. Going as long as ABS like might overcure it a bit and make it more brittle. I add some siraya tech tenacious to my resin to make it more flexible and durable.
That’s interesting i’ve found the opposite personally! I’ve ended up having to go up a whole sec or more, I might have to do calibration cones to really dial it in.
@battlebrothersam That's interesting. I've also noticed that Sunlu/Jayo in the standard resins, the viscosity changes based on color. Darker colors like black tend to be thicker, and lighter colors like beige or mint green are much thinner.
Ive come to find the best results is a 2:1 mix, 2part sunlu abs(I prefer dark grey) to 1 part sunlu nylon like in black. This mix works out to about $33/kg so still not bad
Absolutely stunning model agian bro i got a question what printer did u use for most of the bigger pices i finally looking into another printer and want something a lil bigger than my mars 2pro
have you recorded a video talking to your support settings? Your heavy supports look way different than the lychee standard and I'd love to see your settings.
I have an interest in 3d printing Titans, any idea where the stl’s are after GW purged the internet of them in 2021 like an exterminatus? Would greatly appreciate any help
Great Video! I don't have a big printer but, I might be able to get a war hound printed. I am however curious as to where I might find this model? I really like both your versions of the war hound and reaver, would you be so kind as to point me to a creator or place to look. Thank you
Really amazing work on this project. I do have to mention that your legs are backwards though. The eagle embossed side is rear facing, not front facing. I'd highly recommend using GW's 360 view when assembling their titans. I know it helped me!
I'm glad to see the supports worked out! I'm almost done with my warlord and this project has taught me to love heavy supports. The next one is gonna be much easier to print. I tried this first one with the pelvis join down being 100% solid but I think I could do it fully at 20-25%. So gonna try that next. How much of the reaver did you do solid?
If you make a file supported I'd do mouth stuff for it. I have a few forgeworld titans, warlord, couple hounds. Would love to model a couple reavers!!!!
hey sam great stuff as always bro but quick question do you have a annual membership my wife and i have a fixed income with a balloon payment in august/ September, so i was wondering if there might be an option for that thanks again and great work
Hey Sam, I am currently the owner of a Standard Elegoo Neptune 3 (going on 3 years owning and using) and are going to be purchasing a resin printer. Would the Mars 4 Max 6k be a good purchase for the beginnings of my resin printing adventure? Always enjoy the content, keep them coming brother!
I don't think so, you probably want a mars 12k or anything on the mars line with a large plate. Just have to level it a lot but can also just get a wham bam plate. If you are printing miniatures you really need at least an 8k, and it's super annoying trying to print a tank or land raider on a smaller printer.
Ahhh the joy of resin printing, no matter what the result is, sucess or failure, you still gotta clean up the resin that gets everywhere.... seriously that thing feels like nanobots, just goes everywhere
I read 'adorable' over affordable and thought 'wtf?' lol. someone should design a larger models so the leg joints all snap fit together, adjust it how you want it, and then and have like a hole or something that glue can be shot into to hold the model's legs in that pose. I read and seen a few places of people that build these larger models say they glued the legs a little funny, if they were push fit to get the pose perfect and then glued to hold permanently this would help with that problem. I have never modeled miniatures but have modeled ball joints into my models for FDM prints so it isn't that difficult. Not sure how brittle resign is, PLA and PETG is very forgiving.
Great video bud I was laughing at your expressions throughout and yeah I saw the posts the other day on the discord (I dont hang around to much just pop in, post links and chat to people a bit) but damn that was so sad :-( hope his family is ok.
It was a roller coaster of emotions printing this! I don't seem to have the best of luck with titans do I brother lol I hope so too brother but he knows he has a discord full of brothers to fall back on as do we all
If you want to support the channel further please pledge to my patreon.
www.patreon.com/battlebrothersam
Donate to the project and get your own personal model in youtube history!
www.paypal.com/donate/?hosted_button_id=4DEDDFSBRDT3Q
You sir have a lot of patience regardless, awesome build.
Not sure who Liam is, but I'm guessing there's a very, very sad story behind it. So my sincere thoughts to his family.
I'll be sure to send this along to brother steamboat
Joined the discord earlier this month when I got back into the 3D Printing hobby. Not sure how I lived without it before. Thank you, Sam, and everyone else who makes this community possible!!!
Thanks brother!
Glad you didn't give up!!!!!! Printing up a Warhound titan right now and finally got the legs all printed up.
I like your tea strainer idea, but if you overlap the rafts of small parts, you can put them in the wash together without them getting lost.
Ah now that's smart! Work smarter not harder
I'm always afraid they will pop off the supports and bang around in the soup
100% doing that all the time
I also do that
Holy Crud........ Never thought you would call me out brother, but I'm humbled. And also impressed as heck that you are bringing this Omnissiah creation into existence. Keep working thru the obstacles..... A wise old Master Chief once said: calm waters never made for a skilled sailor. Continue on course Brother Sam.
Where can you get the STLs for this Reaver?
He's ignoring everyone and not crediting the artist!
@@skankhunt_-42 If he were to do that the STL would get taken down within days, if it hasn't already. Games Workshop protects their IP like it's their precious one ring.
If you ever have to break a super glue bond in future, it’s easier to break the bond with a short sharp application of force rather then gradually increasing the force. Putting the item needing to be broke apart into the freezer for a few hours and the super glue becomes even more brittle making it easier to break the bond.
Ah if only my freezer was big enough for a titans legs lol
Try turning a can of dust off upside down and spaying the joint
It's also not water proof so a good soak often does the trick , as does acetone
this channel is criminally underrated, your production level is beyond awesome, thx for the content
gw loves his channel too, practically hands them the creators names and links to them, so useful
Im glad that its such a supportive community - and while I feel the dedication has a sad story behind it - you've put that memory into something tangible that the family may revisit - and that's a really nice thing to do. Im very hyped for the chaos titan legion.
Hope Liam's family are able to find some peace 💖💜💙
Any recommendations on how you located this version of the reaver titan?
Why have i never thought of a tea steeper to hold tiny bits!?!?
😂😂 It took me 2 years
I started my 3D printing journey! thanks to you buddy!
I’m glad you seen the light brother!
I printed my reaver hollow, helps a lot with supports. A few small holes are a small price to pay for an easy to print and overall lighter model.
You are single handedly the reason I had my Titans 3d printed. I just had a Ta'unar done, it turned out gorgeous! I can't stress enough how much better some of the 3d prints are compared to the FW stuff.
Looks great man, amazing turn in the project. I personally do Print -> hot water -> clip supports -> washing -> RINSING with fresh spirit(it really gets these tiny white flakes disappear. Great job, keep up the good stuff.
Where did you find the STL???
if its any reassurance dude, i feel like half the draw of this chsnnel is you being "in over your head", you're not the most experienced hobbyist but that makes your experiences more relatsble and compelling ^^
These are big projects but you give me, and i imagine many other people too, aspirations to tackle the challenges you face in the name of hobbying fun
Haha I'm glad you said that I feel like I just bumble my way through things 😅😂😂
Yes YES!!!!!
It is completed. Resin for the resin god !!!!
I’m glad you were able to complete it and those makercults look sick.
I don’t understand what’s going on with little Liam ?
Thanks brother! A patreon in the discord shared some very sad news so I wanted to pay my respects and incorporate him into this project.
@@battlebrothersam oooh i see. then god bless them and im praying for them.
where did you get the STL's from ? have you a download link ?
I dunno if you agree here but I make sure supports never touch when I'm printing Sam mate. That may be why a lot of stuff get's pulled off from suction force, I dunno what happened to you but it's maybe a thing to consider. printing bigger, heavier stuff is a pain so best to separate it best you can xD
I probably should print less on the plate to counter act it
@@battlebrothersam I thought that too but as long as they aren't touching I think most print alright. With bigger things though you are right, you need heavies. I'm, so paranoid now and over support. The trick is always orientate iot so you can hide most big or medium supports. A bit of m,illput and methylated spirit can fix the holes once sanded anyway xD
If you need to undo superglue, put it in the freezer. It will become brittle enough to Crack apart
That trick works on mainly specific types of super glue, mainly insta-cure/cyanoacrylate or other curing type glues. They are the most common types but for anyone wondering if it's not working, it's probably a different type!
(The actual reason why is as the glue cures it forms a crystalline matrix, and freezing it causes water to get into the gaps of said matrix, which break apart as it solidifies, making the contact very brittle!)
Bro, thank you so much, just ordered my first printer, and I'm nearly ready to begin printing. Thank you so much!!!!!
Thanks for the kind words brother
This looks so awesome and your resolve is insane.
Where did you get such an amazing model? Also is it possible to print it in epic scale?
Ayyy, just finished putting together the legs of the exact same one! Printing the upper body as we speak.
Coming back to this video after some rough prints I’m gonna redo the supports and wait for more resin to arrive
Use putty, or the reusable painting/poster tack, or anti earquake stuff. Little blobs of sticky reusable putty for holding things on walls or keeping stuff on shelves if they shake, get the good stuff and you can use it in place of glue on bigger models like this to make sure they go in that way first, it's not a perfect fit, being a bit thicker than glue, but helps a ton in previewing ideas, especially when kitbashing.
I use "Aleene's Instant Tacky" craft putty, and "QUAKE HOLD!" The first one is better on the residue side, it's less for working on parts before painting, while the second has very slight residue if you don't clean it up or wash aftewards, but is a bit stronger of a hold for bigger or heavier parts.
Sunlu ABS-Like has been an absolute godsend! Found it far better than Anycubic/Elegoo equivalents… both printability & when you bounce it!
The beige colour was £33.95/2kg on Amazon prime day, think grey is back up at about £50/2kg sadly!
Sunlu ABS-like was amazing when it was under £20/kg. I think it was £17 a bottle at one point.
Then Jayo ABS-like kind of filled that niche.
I can't find anything equivalent that's cheap now.
I cannot believe my positive response of "Stop crying and do better bitch!" Helped! Great job on this titan!
For small parts, you might want to try small mesh laundry bags. Use a binder clip or something to hang the bag on the side of your wash. Works well for me.
i really want to thank you because you got me in to 3d Printing
where do you find the titan print files?
Awesome build (loved the inclusion of the Jawa figure at the end 👍🇦🇺).
“For the love of Horus” sounds an awful lot like heresy brother Sam…
Sunlu Standard has a lower viscosity than the ABS like, so you can actually reduce your cure time by .1 or .2 depending on your printer. Going as long as ABS like might overcure it a bit and make it more brittle. I add some siraya tech tenacious to my resin to make it more flexible and durable.
That’s interesting i’ve found the opposite personally! I’ve ended up having to go up a whole sec or more, I might have to do calibration cones to really dial it in.
@battlebrothersam That's interesting. I've also noticed that Sunlu/Jayo in the standard resins, the viscosity changes based on color. Darker colors like black tend to be thicker, and lighter colors like beige or mint green are much thinner.
where did you get the pattern for the prints from?
Petition to make Sam the CEO of Games Workshop.
You either go out a hero or live long enough to see yourself become the villain
the standard is not bad but more brittle I find. Just finished a sokar on mine :)
I think I'm going to go into detail in the next video or after but this standard resin isint all it's cracked up to be, pun intended lol
Ive come to find the best results is a 2:1 mix, 2part sunlu abs(I prefer dark grey) to 1 part sunlu nylon like in black. This mix works out to about $33/kg so still not bad
FYI super glue debonder is just vinegar.
Avoid your problems with superglue forever, get some blue tac and then stick things together with that for a temp fit and pre-fit the fiddley bits.
Absolutely stunning model agian bro i got a question what printer did u use for most of the bigger pices i finally looking into another printer and want something a lil bigger than my mars 2pro
Thanks brother! I used the phrozen sonic mighty 8k a beast of a printer
Very nice, I've got the elegoo 8k Saturn 2 and am very tempted to take this on, but lack of space is a major issue.
I was wondering what liquid you were using when you were cleaning the resin.
have you recorded a video talking to your support settings? Your heavy supports look way different than the lychee standard and I'd love to see your settings.
I have an interest in 3d printing Titans, any idea where the stl’s are after GW purged the internet of them in 2021 like an exterminatus? Would greatly appreciate any help
How many plates did that take overall?
Hey where did you get the 3D print file?
Great Video! I don't have a big printer but, I might be able to get a war hound printed. I am however curious as to where I might find this model? I really like both your versions of the war hound and reaver, would you be so kind as to point me to a creator or place to look. Thank you
hey im new to 3d printing for warhammer and dnd, what do you recommend for paid stl creators on patreon or tribes?
man that little liam mini hit home here.....
Really amazing work on this project. I do have to mention that your legs are backwards though. The eagle embossed side is rear facing, not front facing. I'd highly recommend using GW's 360 view when assembling their titans. I know it helped me!
Glad someone said something. I have a few forgeworld versions, that was gonna drive me nuts lol
NO WAY! a Tea Infuser for small bits! OMG so simple why did I never think of this!
It took me 2 years to think of it brother
@@battlebrothersam brilliant
Where are these STLs I can't find anything good online
the stl i've got has instructions in the file folder lol, i'm glad i've wathed this before i print the reaver. its my favourite of all the titans!
fdm printer would be grand for all vehicle army or larger
@@battlebrothersam yeah I've just got an fdm, still learning to use it properly. Much prefer resin!
I'm about to start printing soon, do you have any recommendations for my first print?
Anything by the makers cult! Valor korps are top tier
Because of you my 3D printer is back at work as of right now
what liquid do you use for washing?
do you share where you get your STL files on your patreon?
I'm glad to see the supports worked out! I'm almost done with my warlord and this project has taught me to love heavy supports. The next one is gonna be much easier to print. I tried this first one with the pelvis join down being 100% solid but I think I could do it fully at 20-25%. So gonna try that next. How much of the reaver did you do solid?
dud what are those supports? new heavy? what is that?
So just recently stumbled upon your videos and they are great. I was curious though what you use in your wash station?
Thanks! Methylated spirits
Brother, I knew you could do it!! 🎉
Thanks brother
@@battlebrothersam Of course, Brother! Battle SGT Turbo is here for support 😶🌫️
Where can i get this file??
I’m not crying. We’re all crying.
Cant wait to see the rest of the legion
Is that a Jawa with a blunderbuss?
Could we get an iron warrior start collecting
These videos are cool and all, but where are people finding these 3d print files. I can find them anywhere.
Are these available to purchase?
Titan and Secutarii. Awesome
Wait, where did you even find the files to do this?
Great video! Where did you find this model?
Are there many folks in the discord who print with PLA? I'm rockin the Ender 3 because I don't have a well ventilated area for a resin printer.
How much resin you used ?
Test fit with bluetac (poster putty).
youtubers que dejan el link directo merecen el cielo
Does anyone know where I can buy a 3d printed titan?( actual model, not stl files)
I do if you still looking for!
what slicer are you using? heavy supports in photon workshop rip the absolute hell out of my prints and are a nightmare to get off
If you make a file supported I'd do mouth stuff for it. I have a few forgeworld titans, warlord, couple hounds. Would love to model a couple reavers!!!!
hey sam great stuff as always bro but quick question do you have a annual membership my wife and i have a fixed income with a balloon payment in august/ September, so i was wondering if there might be an option for that thanks again and great work
Thanks brother I thought I had it set up but I didn't! I've enabled annual memberships on patreon
@@battlebrothersam thank you sir and look forward to that discord in the future
I see you use a tea steeper just like I do for small bits 😂
I put my model in hot water after washing in alcohol. It's much easier to break off the supports without damaging the model.
where can we find this file ?
Where do you get the file for this?
Any luck on finding out? I am tempted to ask him but looks like he did not respond.
I don't know Liam but I'm a mom. My deepest and most heartfelt condolences.
Hey Sam, I am currently the owner of a Standard Elegoo Neptune 3 (going on 3 years owning and using) and are going to be purchasing a resin printer. Would the Mars 4 Max 6k be a good purchase for the beginnings of my resin printing adventure? Always enjoy the content, keep them coming brother!
I don't think so, you probably want a mars 12k or anything on the mars line with a large plate. Just have to level it a lot but can also just get a wham bam plate. If you are printing miniatures you really need at least an 8k, and it's super annoying trying to print a tank or land raider on a smaller printer.
Awesome, here is the question most want to know. Where is the STL?
Can anyone tell where to find these files? Or better yet, provide me with a link?
Any Luck? Also looking.
Where are the files at for this ??
I hope you got some of that elegoo resin on sale Sam mate lmao. I bought 20 litres there haha.
Unfortunately I didn't brother 😅 I instead loaded up on 20kg of this sunlu resin which I think was a big mistake
@@battlebrothersam It's probably all made in the same factory in China anyway lol.
Why did you not mention that you messed up the knees too and glued em backwards? ;)
No I didn't?! Did I?!!? Not again 😢😅
Way too late now but you should have used the "killer of world" file. Its got a full interiour and it almost identical parts wise to the FW original.
Can someone help me get the files to print it myself ?
Ahhh the joy of resin printing, no matter what the result is, sucess or failure, you still gotta clean up the resin that gets everywhere.... seriously that thing feels like nanobots, just goes everywhere
man ive been trying to find this file for ages but every single one is always taken down annoying as shit
I read 'adorable' over affordable and thought 'wtf?' lol. someone should design a larger models so the leg joints all snap fit together, adjust it how you want it, and then and have like a hole or something that glue can be shot into to hold the model's legs in that pose. I read and seen a few places of people that build these larger models say they glued the legs a little funny, if they were push fit to get the pose perfect and then glued to hold permanently this would help with that problem. I have never modeled miniatures but have modeled ball joints into my models for FDM prints so it isn't that difficult. Not sure how brittle resign is, PLA and PETG is very forgiving.
Great video bud I was laughing at your expressions throughout and yeah I saw the posts the other day on the discord (I dont hang around to much just pop in, post links and chat to people a bit) but damn that was so sad :-( hope his family is ok.
It was a roller coaster of emotions printing this! I don't seem to have the best of luck with titans do I brother lol
I hope so too brother but he knows he has a discord full of brothers to fall back on as do we all
兄弟，可以分享 Reaver Titan 的 3D 打印文件吗？
if you ever want the warbringer files let me know