Hey bd alchemist I've installed romraider and tactrix on my laptop I've done everything it says but I'm having problems with the definitions files.. Do u have a number I could call u on or messenger u seem like u now a lot what ur doing eny help would be great thanks
Tactrix alone cannot. The program you are using has to have the ability to do that. Depending on the vehicle, ecu access and manipulation level changes.
BD Alchemist I appreciate the response. Such as rom raider making all codes “passable” I’m just curious if the car will stay that way till you reset it and if a shop doing an inspection will catch it. I want to straight pipe but would like to not change the exhaust every year. Again thank you!
you can disable the CEL for it, but the emissions ready-ness won't verify and the car will run the same. However this is very useful in disabling secondary air smog system and egr CEL's
open source just means you tuned your stock ecu. nothing to remove. you can put the stock tune back if you want which will remove all the calibrations but make sure all the hardware is also stock.
@@MKF27 u can use flashpro from hondata. I think they support ur platform. Once u get the product , flashing it back to stock rom (which is a built in feature of the flags pro) should solve ur issue. Ecuflash cna be used too but u need the stock rom (can be found on the internet) and definitions for the ECU flash + cable needed. I feel hondata is easier.
![เปิดบ้าน นาราเครปกระเทย 1 ไร่ ขายขาดทุนหลัก10ล้าน เอามาใช้หนี้!!! l [Nickynachat]](http://i.ytimg.com/vi/0jz84VFWVP4/mqdefault.jpg)
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
This the information I've been looking for man !! Thank you !!
Your welcome
@@bdalchemist where do I get more romdata files I only have 4 when I go into Mitsubishi then lancer. Do I need a custom one made ?
@@westtexas501 update ur ecuflash , the new version has alot more. U also have to collect over time like the tephra ones
@@bdalchemist ill try that out. Im only really trying to get the one for my car. But I mean in never hurts to have extra ones .
starting my tuning research and everything helps! Thanks for takin the time to make and post this vid 👍✊
I'm trying , but there are alot of info. I feel not as articulate as I should be the content .
Hey bd alchemist I've installed romraider and tactrix on my laptop I've done everything it says but I'm having problems with the definitions files.. Do u have a number I could call u on or messenger u seem like u now a lot what ur doing eny help would be great thanks
@@jaygtgarage6489 find me on FB, "BD Alchemist"
@@mehidihassan7362 I've ended up sorting it all out but thanks for ur help
I’ve just started my tuning research for my subie too, what videos you recommend?
Can u help me out…need a tune for my 04 sti swap.
Yes I can , contact the shop
@@bdalchemist where is your shop located?
@@Ahoooie Illinois
Great videos
Thank u
Hey man so can the tractrix make your car passable if you have a cat code popping up all the time?
Tactrix alone cannot. The program you are using has to have the ability to do that. Depending on the vehicle, ecu access and manipulation level changes.
BD Alchemist I appreciate the response. Such as rom raider making all codes “passable” I’m just curious if the car will stay that way till you reset it and if a shop doing an inspection will catch it. I want to straight pipe but would like to not change the exhaust every year. Again thank you!
@@LeavEyeDDrum which car are u reffing to. If no one changes those specific tables of a map, it won't change.
BD Alchemist thank you this helped a lot!
you can disable the CEL for it, but the emissions ready-ness won't verify and the car will run the same. However this is very useful in disabling secondary air smog system and egr CEL's
How do you remove open source tuning? I have a FK8 Civic Type R
open source just means you tuned your stock ecu. nothing to remove. you can put the stock tune back if you want which will remove all the calibrations but make sure all the hardware is also stock.
BD Alchemist all the hardware was removed but now there’s no boost
How was the car tuned ? Using which program/device ?
mehidihassan1 I’m not even sure. They previous owner isn’t being very helpful other than disclosing that it’s an open source tune
@@MKF27 u can use flashpro from hondata. I think they support ur platform. Once u get the product , flashing it back to stock rom (which is a built in feature of the flags pro) should solve ur issue. Ecuflash cna be used too but u need the stock rom (can be found on the internet) and definitions for the ECU flash + cable needed. I feel hondata is easier.
Hey how can I contact you? I need to get a tune for my wrx
office@bpautosports.com
Haha them voice cracks bro xD
Lol