ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to install reverse camera on golf 8
ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2023
- Coding list for RVC:
Gateway 19 - long coding
paco_video_parksystem Byte20Bit1 - RVC_compact_smart
Multimedia 5F - adaptation
Vehicle function list BAP - VPS_0x0B (activated)
Vehicle function list BAP - VPS_0x0V_msg_bus (Ethernet)
function_configuration_unit - RVC_video_input (ethernet)
parkingsystem_video_input - carrier_resolution (1392x656)
Some useful links:
My first video:
• Where to plug wires fo...
OBDEleven device i used:
obdeleven.com/?src=link&ref=uk o76LhFZ8XOFZfz
(Because of YT there is space between ..uk and o7..)
Camera and harness in video:
www.aliexpress.com/item/1005 004899501330.html?spm=a2g0o.order_list.order_list_main.68.21bb18021ikHVi
(Because of YT there is space between ..1005 and 0048.. )
How to get to fuse box (the right way)
• VW Golf MK7 (5G) RVC H... - 18:40
How to replace rubber grommet connecting car to trunk door
• MK7 Rear Hatch Rubber ...
This is NOT a step by step tutorial about how to install RVC. This is like a walk through how i installed RVC.
The only step i didn't record is at the very end. If camera module isn't added automatically. Go to module list. There is a plus button. Press there find camera module 6C module and mark it. When you press save or ok. App will ask you to autocode gateway, press yes. And now you have one more module on list (camera module). Do this after installing and coding camera.
Heeeey man, thank you! I appreciate the effort!
I will start the process in the weekend with my friends. Let's see if we can make it happen.
I'm glad to help :)
That is a real help. What a nightmare :)
Awesome.
I saw your video, very interesting video with good tricks. Where did you finally placed the 12v wire?
I pigyback the fuse for parking sensors.
Hi, I coded my golf but it hasn't parkingsystem_video_input menü. How can I do ?
Bravo za odlican video👏👏👏.
Znas li mozda da li gateway mora da bude high, ili to nije uslov?
Hvala. Koliko sam ja video da. Na golfu 7 mogao je i analogni video ulaz. Na golfu 8 koliko sam ja video nema mogucnost za analogni video ulaz (iskljucen je pin u softwareu). Drugim recima mora high gateway zbog digitalnog signala.
Thanks for this video, will this be the same process for UK cars?
Can you list the coding you did in the comments please easier to follow.
Thankyou so much
I added coding list to description. As far as i can dig up "yes". You just have to go on opposite side (right). Gateway should be under steering wheel. I still recommend you route wires via grommet where connector is on trunk door (there is more room inside that grommet)
@@alexadabic thanks so much mate this is a huge help, and your happy with the quality if camera ? I just need to check gateway is same before I order
Yeah quality is good. In standard mode cameras edges are a bit blurry but when you switch to wide angle picture is crystal clear.
Yes you have to check! You can watch first video i made about RVC (link in description)
Hey, did you connect the washing hose and how did you do that? Did it come with the kit?
I dont remember if i got a new one. I just reused the original since it is the same size anyway. And ofc vw factory original should always be better quality
Thanks a lot.... I'm struggling with activating the camera feature on an Octavia 2023 - which is the exact same as the Golf 8. I'm a bit lost with the SFD activation, did you have to do anything about it? Contacting a workshop and paying is enough to have the codes? I'll have access to VCDS so I will check if I can do these but any help would be appreciated.
I used obd11 since it has built in SFD deactivation/bypass. I read somewhere that there is a way to baypass SFD with VCDS. But since i don't have it I don't know. I'm so sorry 😔
If you can't find it on forums maybe the best/easiest way is to pay workshop to code it for you
@@alexadabic Thanks a lot Aleks :) I've ordered an OBDEleven with Pro Pack so I'm impatiently waiting for it. I don't know how well I would be welcome at a workshop for such activity so I went OBD Eleven first and I'll see... I did my first OBD tools with ELM323 around 2002, then my own with just 3 optocouplers back at the vanilla VAG-COM times so I'm having hard times paying VAG for it... lol ... I rather pay other companies developing their tools :)
@@alexadabic Hello, small update from my side.... I received the OBDEleven PRO Pack and coded as you indicated and everything is working fine! Thank you so much, you're the BEST. The camera resolution is not astonishing but it's decent (...I bought it from an expensive well known German company who does retrofits)
Hello, is it necessary to calibrate the camera as part of the installation? I mean how the orange guiding lines react to the steering wheel, or any distance?
There is no need for calibration. Exept if you want self park function to use it. But as to my knowledge you need more than obd11 for that.
Lines move with front tires. They are using front steering sensors. As far as i know.
Ma con questa codifica si può usarla anche per 8 sensori o solo 12?
Hello is it the same installation with the audi a3 8y? And same coding no?
You can see coding on obd eleven. It should be the same as on golf. The platform is same
Hello Aleksa, you're video was perfect for me to fit my rear camera I done all that you did, but I have a small issue, when the camera is activated the picture doesn't fill the full screen! And Also the parking sensors covers some of the image as well. But when I swiped the parking sensors away the camera image now shows in full screen! Weird. Do you have any ideas how to fix
Thanks John
Just looked at your instal video and your parking sensors are on the left side of your screen but mines is in the right side and that's the part of the screen that's blacked out! Do you think because my car is right hand drive that's the problem?
If what you see is the same as the picture in 39:25 than thats normal.
If sensor "data" or picture of the car with forward and backward sensors (that has grey background on mine) is on top of camera image, then you probably have an older model of gateway. Same as on golf 7.5. That's normal too, and i think there isn't anything you can do.
If your car is right-hand drive. Then, sensor data will be on the other side as well.
@@alexadabic yes my car is right hand drive, so my parking sensors cover the video image on the right side of scree but leaves a space on the left side of the screen, I will have a look on obdeleven to see if possible to change left to right
@jonl6280 Aha, i think i got it now. Just make sure not to switch driving sides. That would cause any number of errors regarding driving aids. Also, i would recommend coding the car just like i did and leaving it for the night. Golf 8 gateways have auto troubleshoot and auto diagnostic built-in. So leaving it for the night gives a car time to sort itself out. Ofc if something is coded wrong car will not correct that. But leaving it will give you an idea at least.
Do you have video of the codering ☺️
You have everything in the description of the video 😁
yes I know but I have no picture and for me it is the 1st time hence my question, can you put the codes here for convenience
Did you mean this?
Gateway 19 -long coding
paco_video_parksystem Byte20Bit1-RVC_compact_smart
Multimedia 5F - adaptation
Vehicle function list BAP - VPS_OX0B (activated)
Vehicle function list BAP - VPS_Ox0V_msg_bus (Ethernet)
function_configuration_unit -RVC_video_input (ethernet)
parkingsystem_video_input - carrier_resolution
(1392x656)
@@alexadabic , Thnks, I ordered my self a obd11 pro 👍☺️
Alexa, koliko je komplikovano ugraditi senzor bočnog udara?
Nije mnogo. Moj auto je dosao sa njima. Koliko sam video treba uzeti nosace senzora, senzore i kontroler njihov. Posle samo sa odb11 da se programira
Treba obratiti paznju samo za verziju kontrolera. To je mozda najbolje videti po forumima. Koliko ja znam golf 8 je izlazio iz fabrike sa 3 verzije glavnog kompljutera
Très bien le tuto. Merci. Par contre j'ai toujours un défaut de caméra. Le 6c me demande de faire une mis à jour. Je ne sais pas comment faire, si quelqu'un a une idée ? Merci encore
Very good tutorial. THANKS. On the other hand, I still have a camera fault. The 6c asks me to do an update. I don't know how to do this, does anyone have any ideas? thanks again
Hello, di you have a link fir the camera?
Just found this amazing item on AliExpress. Check it out!
€184.61 20%OFF | Boot opening and closing Flap with VW logo switch Control system For VW Golf 8 MK8 5H0 827 469 5H0827469 5HG 827 469 C
a.aliexpress.com/_EHGrXEv
@@alexadabic hi , can I ask if you know the difference between the rear cameras? As I've seen some with different letters after the part number ! Like the link you sent is C and I've seen some with D and F. Thanks john
Hi thanks for the link I have ordered one , may I ask what the live cable gets connected to in fuse box? Is it a switched live feed? Or constant live? Thanks again
@jonl6280 You need constant live. You need it because of the switch for trunk
As for the letters at the end. To *my* knowledge, they just represent the country/continent where they are meant for.
Hi, the ali express link doesn't work
Here is a new link:
www.aliexpress.com/item/1005004899501330.html?spm=a2g0o.order_list.order_list_main.56.323f1802Zs3xal
This is the one i got
@jonl6280 Hey did you ever find out how to fix this I also have a right hand drive car
I’m wondering if you managed to fix this in the same position😅