Diesel Heater Install (Mercedes Sprinter Camper) - EP17 Van Build
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In this video we install a diesel heater in our Mercedes Sprinter as part of our off grid camper conversion. We used the auxiliary fuel connection on the van's main fuel tank to supply fuel for the heater.
We hope you enjoy the video and if you want to see more behind the scenes you can follow us on:
Instagram & TikTok ▶ @brookandjulius
Products:
Diesel Heater ▶ amzn.to/3SbUVnU
Cable gland ▶ amzn.to/3xzUESl
Tools:
Torx set ▶ amzn.to/3xw4zs8
Holesaw Kit ▶ amzn.to/3Inqh7G
Socket set ▶ amzn.to/3XOEkrn
Step bit ▶ amzn.to/3S94ofX
Drill & Impact driver ▶ amzn.to/3xjVJ0t
Impact wrench ▶ amzn.to/4166Yau
-------
The above may include affiliate links. Wherever possible we have linked the exact products we used, however some are equivalent products due to availability.
very detailed! really thankful to see this!
Good idea if you run a 1 way valve off the line in the tank.never drop line pressure from the heater
Nice video and install mates! Good details. Thanks!🤙
Cheers mate!
She's a lucky lady ;)
Love the tip of the auxiliary on the tank for the sprinter will definitely come back and check this out again when I get to the heater install. Awesome vid 🙏
Thank you! Yeah the auxiliary port definitely made it easier. If you can get the right fitting it would be even easier 😅
Thanks heaps for exposing where the auxiliary out let was hiding! I had looked everywhere today on my Sprinter. I was about to make a tank out of 100mm PVC sewer pipe and strap it up under neath as there is heaps of room between the main tank and the LHS sliding door step..... now to buy some ramps 🤦♂️
No worries! Hopefully you can find the right connection for the top of the tank! We used that space between the fuel tank and sliding door for one of our water tanks
Have a nice holiday❤ from germany Henning
Thanks Henning ❤️
Thanks so much for the detailed video it’s much appreciated
No worries!
This was a great video, very useful, many thanks for sharing.
But recommend using protective thin gloves when fiddling with all that diesel..
Thanks 🙏
Yeah I probably should have!
Well done video. I would move the muffler/silencer to protrude beyond the edge of the van and not trap CO underneath. It will infiltrate.
The ramps looked a little sketchy for such a heavy vehicle also.
But the tank drop video is very nicely documented. Did you ever find out what kind of fitting that requires? Never seen anything like it.
Thanks for the feedback and concern. The ramps have actually had extra reinforcing added. Will look at the exhaust but would be very surprised if exhaust gasses were infiltrating. Never looked into the fitting again after the install. The one I thought it was meant to be from the research I did was a Dorman quick connector so must be something very similar. This was the one I ordered: amzn.to/3lBqafW
Might be a silly question, but when the fuel tank is reinstalled do you have to bleed the fuel line to the engine?
Not a silly question at all. We didn’t prime it or bleed it, just let it prime when we turned the ignition on and had no issues
Can you tell me what year your sprinter is. Mine is a MWB 2013 and the floor under the seat isn't flat. Apart from being corrugated, it also slopes on an angle from front to back. I haven't seen any others like mine in any videos as yet. Surely mine can't be the only one like this. I imagine the heater needs to be installed on a flat level surface?? Thanks for your very informative video.
We have a 2008 518 sprinter. Weird that floor is sloped on yours 🤔 we had a few corrugations but there was enough flat area for the part that mounts to the floor
@@brookandjulius ok. Thanks for the info 😊
The exhaust gets quite warm. Any issues with the exhaust and the factory undercoating?
We haven’t had any issues with it
Hey can you install my diesel heater in the sprinter ?
No can do sorry! It’s a relatively straightforward install, but I’m sure a caravan or van builder could do it for you
Gloves 😂
In hindsight, yeah that would have been ideal…