Very clear, concise, professional, no waffle, no mumbling, Excellent. (Didn’t realise it can’t control hot water) Now have to figure how to turn OFF hot water on my Bosch green slave
Excellent tutorial, I have to say as the guy says "maybe you're old school where you think on is on and off is off" I AM "old school" I have to admit I didn't realise that whatever I set the off temperature at, it didn't matter the heating would go off, so I have had the setting at 15 in an empty rented property and wondered why the heating kept clicking on and off . . . . I know now! AND? I will probably set it to manual now and set the temperature at around 12 just to keep the place aired. Thank you Adam.
Excellent .... I now understand how to use my EPH. I prefer manual mode and you confirmed that its the cheapest setting to use. Autumn/Winter setting is 21.5 and spring/ summer 18.0. Hoping thats cost effective in 2024.
Hi there, getting shot of my hive home heating (a nightmare for me) will this EPH controller work with my Worcester Bosch Greenstar 24i junior boiler. Appreciate in advance.
It will stay at that temp until it reaches the desired temp, when it drops it will come back on and try to hit that temp again. It will stay on until your next OFF time has been reached
This video was so useful, thankyou! Recently my thermostat is showing a much higher temperature than what the actual temperature is in my home, it is not positioned near a window or a heating source, would very much appreciate any advice!🙏🏼
Hi very good video iv just had a new worcester 4000 installed replacing my 50 yrs old boiler ! So very new to all this can you help how do I program different times for different days over 7days as some days I'm not in alot & some times away the auto in the video shows the same time across the week mon- Fri Thanks to anyone who can help
Is it possible to interchange it? Example you have your settings for when you want it to come on or off but if you get home before the set time is it possible to manually turn it on without messing up the auto settings?
Yes absolutely. Just press MAN and then use the + - buttons to control. When you want it back to the timer press AUTO and it will be exactly as you first set 👍
@@newboilerblackpool our bolier is in the bedroom and when we first had this we had the control downstairs, then we noticed the radiators kept going off, I looked at the control and the WiFi signal had gone off so I took it upstairs into the bedroom and it came back on , which is very strange considering our WiFi router is downstairs 🤷♂️
@@nickking2491 very strange. Manufactures do cover themselves with this by saying depending on WiFi strength and wall thickness etc. however it’s something we haven’t ever had tbh. You may need to have a hard wired version. Not ideal
My EPH Control fell into water and stopped working and I have got a fairly used on EBay. How do I connect it to the receiver connected to my Boiler, please?
my EHC combi boiler has its own program in the main body. Which does it follow? The one on the main boiler body or the one in this remote. I have seen that even if i put the remote on manual mode from 10 am to 11 am , if the program in the main unit does not have the central heating program from 10am to 11am , the boiler does not swtich on , even though the fire symbol comes on in the remote. Can you help ?
Is there no how to turn off the heating entirely? It keeps coming on when I don’t want and going off when I don’t want. It’s exhausting and I am overspending
Does anyone know how to then connect it through the Ember app? All the videos show a gateway that I don’t have and can’t for the life of me workout how to get it to connect to the app so I can control it away from home.
Very clear, concise, professional, no waffle, no mumbling, Excellent. (Didn’t realise it can’t control hot water) Now have to figure how to turn OFF hot water on my Bosch green slave
Thank you. It’s a decent controller this one. 😊
Thank you
Excellent tutorial, I have to say as the guy says "maybe you're old school where you think on is on and off is off" I AM "old school" I have to admit I didn't realise that whatever I set the off temperature at, it didn't matter the heating would go off, so I have had the setting at 15 in an empty rented property and wondered why the heating kept clicking on and off . . . . I know now! AND? I will probably set it to manual now and set the temperature at around 12 just to keep the place aired. Thank you Adam.
No problem . Glad it has helped 👍
Hey, thank you! Very clear instruction. Much appreciated 🎉
Glad it was helpful!
very helpful
Glad to hear that
hey mate, thanks a lot. we're nice and cosy now!
No problem 👍
Thank you 🙏
You’re welcome 😊
Thanks for your video. That's helpful. Could we make it connect to my mobile wifi so that I can control it even if I am at outside.
Excellent .... I now understand how to use my EPH. I prefer manual mode and you confirmed that its the cheapest setting to use. Autumn/Winter setting is 21.5 and spring/ summer 18.0. Hoping thats cost effective in 2024.
Glad it was helpful!
All I want to do with my newly installed boiler is to manually switch my heating on and off without using the timer. Old school. How do I do that?
Re watch the video it tells you. Press MAN. Then use the up and down arrow to choose temp! . Nice and easy 👍
Thank you
You're welcome
Trans for the video, super simple
Excellent instructions - clear and simple. Also, the only one I could find that shows how to ADJUST an incorrect time. Phew!
Thanks for the comment 👍
Hi there, getting shot of my hive home heating (a nightmare for me) will this EPH controller work with my Worcester Bosch Greenstar 24i junior boiler. Appreciate in advance.
Yes it will absolutely 👍
When setting Prog temps, how long will it stay at that temp? Is there a way to choose how long it is at that temp?
It will stay at that temp until it reaches the desired temp, when it drops it will come back on and try to hit that temp again. It will stay on until your next OFF time has been reached
This video was so useful, thankyou! Recently my thermostat is showing a much higher temperature than what the actual temperature is in my home, it is not positioned near a window or a heating source, would very much appreciate any advice!🙏🏼
Hi. Thanks for the comment. How do you know it’s showing a higher temperature? It might be the actual temperature ….
Hi very good video iv just had a new worcester 4000 installed replacing my 50 yrs old boiler ! So very new to all this can you help how do I program different times for different days over 7days as some days I'm not in alot & some times away the auto in the video shows the same time across the week mon- Fri
Thanks to anyone who can help
Unfortunately you can only set mon-Fri and then sat/sun. Not daily times . Hope this helps
Great video 🎉
Thank you 😁
does this not control the hot water at all then?
No this is for heating a combi boiler boiler
Is it possible to interchange it? Example you have your settings for when you want it to come on or off but if you get home before the set time is it possible to manually turn it on without messing up the auto settings?
Yes absolutely. Just press MAN and then use the + - buttons to control. When you want it back to the timer press AUTO and it will be exactly as you first set 👍
Good evening, does the remote have to be near to the boiler to work ,
No not at all 👍
@@newboilerblackpool , every time I move it away from the boiler it turns off ,
@@nickking2491 it’s designed to work independently around the home. 🤔
@@newboilerblackpool our bolier is in the bedroom and when we first had this we had the control downstairs, then we noticed the radiators kept going off, I looked at the control and the WiFi signal had gone off so I took it upstairs into the bedroom and it came back on , which is very strange considering our WiFi router is downstairs 🤷♂️
@@nickking2491 very strange. Manufactures do cover themselves with this by saying depending on WiFi strength and wall thickness etc. however it’s something we haven’t ever had tbh. You may need to have a hard wired version. Not ideal
My EPH Control fell into water and stopped working and I have got a fairly used on EBay. How do I connect it to the receiver connected to my Boiler, please?
my EHC combi boiler has its own program in the main body. Which does it follow? The one on the main boiler body or the one in this remote. I have seen that even if i put the remote on manual mode from 10 am to 11 am , if the program in the main unit does not have the central heating program from 10am to 11am , the boiler does not swtich on , even though the fire symbol comes on in the remote. Can you help ?
If this has been wired up to the boiler then the boiler will listen to this one always 👍
Hi
How do i take lock from this thermostat
How does it connect to the boiler?
Small received wired in to the boiler close by
Is there no how to turn off the heating entirely? It keeps coming on when I don’t want and going off when I don’t want. It’s exhausting and I am overspending
Press the OFF button under the front flap
What if if is switchedon but the light won't go out
Does anyone know how to then connect it through the Ember app? All the videos show a gateway that I don’t have and can’t for the life of me workout how to get it to connect to the app so I can control it away from home.
I’ve a red triangle 🔺 and no hot water,
Mine won't connect after changing batteries, connect button doesn't do anything when i press it. No other keys responding.
Hey i have the same problem, have you got a solution?
Factory reset. See instructions or download from google