TOOLS and SUPPLIES We Manufacture the Power Carver/400xs Order here...scmsysteminc.com/system_prices.php Main Website... www.scmart.com 1-800-755-0261 1-262-252-3989
Instant sub...awesome how you briefly broke down everything from pricing and different methods...most are too much info drone on n on..or they run through everything like you know what they are talking about... your awesome !
I think you sell yourself short , when you have skill & knowledge to the point at which you can say you have really no skill , then your very skilled . Lovely work , but it's those other 20 / 30 years of looking at designs & ideas that has come to the zenith point of really no skill ........ keep up the great work , very impressive & great kit for tuning & honing model glow plug engines .
The SCM bits are 1/16" (1.58mm) shanks. Most of your dremmels are much larger shanks 1/8"inch ( 3.175mm). There are adapters out there. The only problem is that the slower speed electric drills have so much tugging and pulling that you will bend or break the bits right away. The slow speed electric drills are not really designed for detailing. The 400xs Power Carver have the amazing speed (400,000rpm's) with total control. You don't have that tugging and pulling at all. I hope this helps you.
Sure...You can order direct from SCM Engraving here... www.scmartwork.com/index.php?l=product_detail&p=15 Best prices anywhere....You can use a laser printer, photocopy machine or inkjet. Inkjets you will need to set on high gloss photo paper setting
All you need is a small 3/4 of a horsepower or larger (2cfm or higher). This can be tankless or with a tank. If you have a tank we suggest a 3-4 gallon or larger. You also need a filter/ moisture trap to provide clean dry air going into the 400xs. We carry our Ultra Quiet compressor. This is rated at 60 decibels. www.scmartwork.com/index.php?l=product_detail&p=4 You can use your own filter/moisture trap or we carry on as well here. www.scmartwork.com/index.php?l=product_detail&p=146
What do you recommend for wood,bone, glass, and stone? Do you recommend one of these tools? Or am I better off with a dermel tool? Can this be Ann all purpose tool? Love your work by the way
We have been manufacturing the high-speed engravers for 31 years. You can find them here... scmsysteminc.com/power_carver.php The slow speed electric drill are ok for bulk removal. They vibrate and cause your fingers to go numb. The 400xs/Power Carver are just like drawing with a pen.
Sure...You can order direct from SCM Engraving here... www.scmartwork.com/index.php?l=product_detail&p=15 Best prices anywhere....You can use a laser printer, photocopy machine or inkjet. Inkjets you will need to set on high gloss photo paper setting
The Power Carver / 400xs is run off of compressed air. We do not have the limits of an electric motor. We have been manufacturing our systems for over 32 years. They really are just like drawing with a pen.
I'm looking for that stencil-paper. Where could I get that? I didn't have any luck finding it so far. It would have to be so I can see through to copy a picture.
You can order here...www.scmartwork.com/index.php?l=product_detail&p=15 You can buy it by the sheet or in 25 pack or 100 packs. These will work with laser printers and most ink jet's. When using with ink jet's set your printer to high glossy photo paper. The stencil is so micro thin it is so easy to trace through with the 400xs Power Carver.
Hello! i'm interested in your products for carve gemstones, but i'm not an United States resident. I'm from Mexico, can you give me an email for contact you?
Это ключ. Вам не нужно быть мастером-гравером для получения профессиональных результатов с нашей системой Если вы можете проследить линию, вы можете сделать это. Eto klyuch. Vam ne nuzhno byt' masterom-graverom dlya polucheniya professional'nykh rezul'tatov s nashey sistemoy Yesli vy mozhete prosledit' liniyu, vy mozhete sdelat' eto.
TOOLS and SUPPLIES
We Manufacture the Power Carver/400xs
Order here...scmsysteminc.com/system_prices.php
Main Website... www.scmart.com
1-800-755-0261 1-262-252-3989
Thank you l will be in touch soon.
400xs Power Carver High-Speed Engraving Equipment Here. scmsysteminc.com/system_prices.php
Instant sub...awesome how you briefly broke down everything from pricing and different methods...most are too much info drone on n on..or they run through everything like you know what they are talking about... your awesome !
That was cool thanks for the video
Love it, this drill is awesome
Great job thnk you for the tutorial.
Can you use these tools to engrave on car parts as well?
You sure can. You can engrave on any of the chrome to rims. We also have customers engrave on the glass as well.
Splendid
I think you sell yourself short , when you have skill & knowledge to the point at which you can say you have really no skill , then your very skilled . Lovely work , but it's those other 20 / 30 years of looking at designs & ideas that has come to the zenith point of really no skill ........ keep up the great work , very impressive & great kit for tuning & honing model glow plug engines .
I was wondering where you buy they bits, can I buy them at a local store or do I need to special ones?
You can order them here... www.scmartwork.com/index.php?l=product_list&c=3 These are rated for the 400,000rpm's. They are a 1/16" shank size.
@@scmsystems will these bits work with a dremmel?
The SCM bits are 1/16" (1.58mm) shanks. Most of your dremmels are much larger shanks 1/8"inch ( 3.175mm). There are adapters out there. The only problem is that the slower speed electric drills have so much tugging and pulling that you will bend or break the bits right away. The slow speed electric drills are not really designed for detailing. The 400xs Power Carver have the amazing speed (400,000rpm's) with total control. You don't have that tugging and pulling at all. I hope this helps you.
Great - does anybody have a good source of transfer paper?
Sure...You can order direct from SCM Engraving here... www.scmartwork.com/index.php?l=product_detail&p=15 Best prices anywhere....You can use a laser printer, photocopy machine or inkjet. Inkjets you will need to set on high gloss photo paper setting
What kind of air supply is required to power the 400xs?
All you need is a small 3/4 of a horsepower or larger (2cfm or higher). This can be tankless or with a tank. If you have a tank we suggest a 3-4 gallon or larger. You also need a filter/ moisture trap to provide clean dry air going into the 400xs. We carry our Ultra Quiet compressor. This is rated at 60 decibels. www.scmartwork.com/index.php?l=product_detail&p=4 You can use your own filter/moisture trap or we carry on as well here. www.scmartwork.com/index.php?l=product_detail&p=146
The emphasis is, that it must be very high speed as you say, or you may have bouncing and skipping.
What do you recommend for wood,bone, glass, and stone? Do you recommend one of these tools? Or am I better off with a dermel tool? Can this be Ann all purpose tool? Love your work by the way
We have been manufacturing the high-speed engravers for 31 years. You can find them here... scmsysteminc.com/power_carver.php The slow speed electric drill are ok for bulk removal. They vibrate and cause your fingers to go numb. The 400xs/Power Carver are just like drawing with a pen.
hello..what kind of engraving tips you use ?
thanks
Where do I buy the tool?
www.scmart.com
Where do you get those tools..is it dremal tool's
We Manufacture the Power Carver/400xs Order here...scmsysteminc.com/system_prices.php All of our systems run off of a small air compressor.
How much this tool plz? thanks
You can find all the high speed 400xs Power Carver High-Speed Engraving Equipment Here. scmsysteminc.com/system_prices.php
Where do u get the transfer paper
Sure...You can order direct from SCM Engraving here... www.scmartwork.com/index.php?l=product_detail&p=15 Best prices anywhere....You can use a laser printer, photocopy machine or inkjet. Inkjets you will need to set on high gloss photo paper setting
Where can i get that exact tool you use on here?
You can order direct here. scmsysteminc.com/system_prices.php
Dear SIR , where can l buy that metal engraving ?????
Let us know what you are looking for and we can send you to someone that can personalize it for you.
400,000 rpm???!!!? How is it possible???
The Power Carver / 400xs is run off of compressed air. We do not have the limits of an electric motor. We have been manufacturing our systems for over 32 years. They really are just like drawing with a pen.
@@scmsystems wow that's awesome, i didn't know that
I'm looking for that stencil-paper. Where could I get that? I didn't have any luck finding it so far. It would have to be so I can see through to copy a picture.
You can find the blank stencil sheets here... www.scmartwork.com/index.php?l=product_detail&p=15
What paper is that?
You can order here...www.scmartwork.com/index.php?l=product_detail&p=15 You can buy it by the sheet or in 25 pack or 100 packs. These will work with laser printers and most ink jet's. When using with ink jet's set your printer to high glossy photo paper. The stencil is so micro thin it is so easy to trace through with the 400xs Power Carver.
Hello! i'm interested in your products for carve gemstones, but i'm not an United States resident. I'm from Mexico, can you give me an email for contact you?
My dremel only goes up to 35,000 rpm lol
Same lol about to buy a air powered one now😂
И где здесь гравер?! Нет здесь мастера! Есть копировщик с технологичным инструментом. В цирке ,например,и медведи на великах ездят.
Это ключ. Вам не нужно быть мастером-гравером для получения профессиональных результатов с нашей системой Если вы можете проследить линию, вы можете сделать это.
Eto klyuch. Vam ne nuzhno byt' masterom-graverom dlya polucheniya professional'nykh rezul'tatov s nashey sistemoy Yesli vy mozhete prosledit' liniyu, vy mozhete sdelat' eto.
You can find all the high speed 400xs Power Carver High-Speed Engraving Equipment Here. scmsysteminc.com/system_prices.php