SIMPLE ENGRAVING on metal with the rotary tool. Carving shapes with pendant motor
ฝัง
- เผยแพร่เมื่อ 28 มิ.ย. 2024
- Please give this video a thumbs up and subscribe! 🙏 It will help the channel grow ❤️
Simple engraving on metal with the rotary tool! Let's try carving shapes with the pendant motor. You've asked me a lot to share how I do engraving on my designs, so today I'm excited to show you how! It's nothing complicated, I'm using various attachments called burrs for the pendant motor. Hope you enjoy this video!
⭐️ My mini online course: How to make silver flowers: art-of-metalsmithing.thinkifi...
⭐️ Instagram / stardustmine.art
⭐️ SOME OF THE TOOLS I USE:
- Dremel torch: amzn.to/3UafQtc
- Third hand: amzn.to/4bgB9jJ
- Soldering tripod: amzn.to/3JljTxC
- Soldering block (honeycomb): amzn.to/4azIgnp
- Soldering charcoal brick: amzn.to/3xI8c1t
- Solder pick: amzn.to/3UkLoO0 or amzn.to/3W6otHB
- Borax cone US: amzn.to/3W2A0Yt
- Hot plate for pickling: amzn.to/3xGZ8tP or amzn.to/3UiMie2
- Glass beaker amzn.to/4d3rSgg or glass bowl amzn.to/4cUlkRj
- Basic saw frame: amzn.to/4aUBbgP
- Saw frame: amzn.to/3U2jULN
- Bench peg: amzn.to/3w6LIGO
- Bench peg and anvil: amzn.to/49GfUGJ
- Saw blades: amzn.to/43YYMe9
- Dremel 3000 hand rotary tool set: amzn.to/3U2EqvZ
- Dremel 4000 hand rotary tool set: amzn.to/3U14Q11
- Dremel Flex Shaft Attachment: amzn.to/3xJmaQQ
- Foredom Rotary Tool - amzn.to/3vVGMEI
- Center punch: amzn.to/3JkV9FR
- Rawhide mallet: amzn.to/3vXYs2I
- Ball pein hammer: amzn.to/3W3ZFAa
- Chasing hammer: amzn.to/3UahCKS
- Ring clamp: amzn.to/3JjcIGi
- Ring bezel pusher: amzn.to/3xBCH9f
- Set of pushers: amzn.to/3Uknpyq
- Burnisher: amzn.to/3UkE4lt or Agate knife burnisher amzn.to/49LH3I5
- Barrel (tumbler) polisher: amzn.to/3xyraaE
- Ring measuring mandrel: amzn.to/4aWF2do
- Ring measuring tools set (mandrel, mallet, sizer): amzn.to/3xBD0AV
- Half round pliers: amzn.to/49EJtbF
- Flat nose pliers: amzn.to/4cUkp3j
- Round pliers: amzn.to/3TWpgrY
- Pliers SET: amzn.to/441lJgI
- Wire Cutting pliers: amzn.to/3Q6BGMP
- Flush cutting shears: amzn.to/3xzwwCu
- Steel block for bench top: amzn.to/4aVPeCF
- Selection of sandpapers: amzn.to/3Q5GZMl
Some of these links are affiliate links, which means I may receive a small commission if you make a purchase through this link. Completely optional and no extra cost to you!
⭐️ Additional resources can be found on my Patreon page!
Find out more about becoming a Channel Patron and ways to support the production of the videos: / stardustmine
⭐️ GEMSTONES RESOURCES (PDF to download):
- LIST OF SELLERS: / list-of-gemstone-27415416
- EXTENDED LISTS OF SELLERS & suppliers:
/ extended-list-of-27415903
/ list-of-gemstone-30289794
- LIST of additional RESOURCES for further reading: / list-of-gemstone-27415416
⭐️ TUTORIALS - HOW TO MAKE:
UNISEX RING step by step tutorial: • HOW TO MAKE A RING - t...
BEZEL step by step tutorial: • SILVER BEZEL for caboc...
RING from start to finish: • How to make a ring - f...
LABRADORITE RING: • How to make a ring wit...
EASY STACKIG RINGS: • How to make EASY STACK...
AN EASY PENDANT: • HOW TO MAKE A PENDANT ...
STUD EARRINGS: • How to make Alpaca ste...
STEAMPUNK RING: • STEAMPUNK ring - turni...
GOLD FILLED STUDS: • How to make GOLD FILLE...
⭐️ ADDITIONAL RESOURCES:
Metal starter pack: • BASIC METAL for silver...
Most Basic Tools: • MOST BASIC SILVERSMITH...
Books to learn silversmithing: • Silversmithing BOOKS &...
DIY workbench: • Easy DIY JEWELER'S BEN...
How to fill a butane torch: • Learn silversmithing: ...
Soldering surfaces: • My SOLDERING SURFACES ...
Rotary tool and flex shaft attachments: • Pendant motor ATTACHME...
⭐️ LET’S CONNECT!
My website: stardustmine.art/
Instagram: / stardustmine.art
Facebook: / stardustminejewellery
Pinterest: / thestardustmine
#jewelrymaking #silversmithing #basicengraving - บันเทิง
Make sure to leave a comment and subscribe if you haven't already! The bell icon will notify you whenever new video is posted ❤️ I hope you've enjoyed this video, now you know my "secret" to those patterns on my designs! :))
أدوات ممتازة للحفر هلی المعادن
لكن إذا كان المحور أقصر من ذلك يعطي دقة أكثر في الحفر
سلمت يداك
شكرا لك كثيرا
I was just wondering whether you have to mark your jewellery to prove its silver, or do you simply send it without any markings?
Link for buy this but? Link please
So many types of burrs, so, so many possibilities. Thanks Basia.
Oh yes! My little collection has grown since then, another video is due soon 😀 I've found several really great burrs that I need to show you!
I really learned a lot. And your way of teaching is so serene. Thanks so much! 🙏
Thank you so much Basia for all your videos !! It's always a real pleasure to watch them and to hear your voice (so relaxing !!) !!
oh wow, that's so sweet! Thank you so much ❤️
Mesmerizing! 🤩💖
Seeing you do this, makes me wanna try this too....maybe I’ll give it a try with my dremel! Thanks for another great video!
You should try it! I'm sure you would enjoy it a lot 🥰 thank you so much for watching 🙏
Gm, this is a great video...especially as I am already thinking of all the different engravings I want to add to the jewelry pieces I make. TY!!
Finally!!❤️ I really wanted this video, I was so curious about your (not so) simple engravings 😃... I will try it!
amazing, Faby! 💖 I'm really happy this was useful and you should definitely give it a go! I'm sure you'll be able to make wonderful patterns 💖 Thank you so much
Thank you for the tutorial, Basia! I've been exploring texturing techniques with hammers but can't wait to try these bits on my Foredom.
I will be making one with the hammer texturing in the future too! :)) It's a lot of fun, and maybe there will be something interesting for you too 💖 Thank you so much for watching!
This video is very useful for me and seeing you dooing this is also really relaxing
You are really helpful for everyone
I'm so glad! Thank you 💖
Great information and direction .
Mike Espo .
I will try this . Thanks
👍👍👍👍👍
Thank you for sharing this! we love you!!
Thank you so much! That's so very sweet, I appreciate it a lot 💖💖💖
Useful tips. Thanks a lot.
This video was very helpful and explained everything clearly! Thank you!❤
Glad it was helpful! Thank you for watching :))
I'm so glad I found your channel after traveling so long
Great video, I have never tried to engrave & I’m just getting into metal working making jewellery. Now I’m excited to try engraving with burrs. Thank you!
You absolutely should! I love this technique, feels much easier and safer than any other type of engraving. Definitely worth trying and experimenting with :)
Another Great tutorial, this was really helpful. Thank you 👍❤
awesome! Thank you so so much 💖💖💖
This is a great video and so helpful, thank you so much.
Thank you Dana! That's great 😀❤️
Very helpful thank you 👍
very insightful video thank you
Outstanding work my love!
thank you so much! 🌺😍 That' so sweet xx
This was very helpful! I have used burrs to engrave before, but I intend to be more invested into my engraving so I'll be getting the Power Graver by Foredom. Thanks For Sharing.💚
wow, that will be an amazing upgrade!! I'm excited for you, I'm sure you'll have wonderful effects with it and a lot of fun! Good luck! :))
Thanks for the Video, I enjoy your Video's and Learn alot.
Thank you! Great information. I’m a jeweller that want to learn this new skill. 👍
Literally just dozed off listing to your voice. It’s very soothing :) thanks for the video it was exactly what I was looking for exactly what I wanted to see and helped tremendously. I’m now going to be going around with my lil hand dremel and engraving every bit of metal I can find haha.
I'm so happy you think so! Thank you so much for watching and your sweet comment 🙏 Good luck and have fun engraving! :))
i needed this🙏🏻
I'm really happy you enjoyed it! ❤️
This is exactly what I was looking for! Thank you :)
Awesome! Glad I could help :))
@@TheArtOfMetalsmithing can use on stenlis ?
Gr8 tutorial!👍
awesome! Glad you think so :))
Thanks, so much!
I always try to leave a comment; that was great Basia, thank you for showing us. I'm wondering if you don't mind telling, what size sheet do you find is best for the overlay? And, how is the Lion Forge engraver? One more tip from me (yay), Amazon sells big sets of those diamond burs for CHEAP - like $4-$7. Buying from jewelry supply is at least 6-10 times more expensive - who knows why. The cheap ones from China work well (they are the same as the Rio or Cookson, etc). They come in all one kind or mix sets - I love them. great video as always!
Add water and this technique is just fine for stone carvings. The bits that have the deep curves are not good for stone. Good video.
great job very skillful
Thank you very much John ❤️
Nice video
Thank you
Thank you so much! When you're just starting out it can be a little intimidating to lay out a lot of cash for expensive tools you probably can't afford and may end up not using. Really appreciate this, and you make it look so easy!
Thank you so so much Vinette! I totally agree with you. This is a great solution before it's possible to invest in other engraving tools! :)
Oh this is FANTASTIC!!! I love my LPFG engraving attachment but I am struggling and just cannot seem to get it to work properly. This will help me achieve the desired affect I am looking for. As always your such a beautiful inspiration Basia!! Thank you!!! 💙
Glad I could help! It's a good alternative to proper engraving tools. It's not actual engraving of course, but definitely helps to add some patterns to the metal, and make it interesting! :) Thank you so much for watching love!
@@TheArtOfMetalsmithing B, why is it "not actual engraving, of course"? My dictionary says you ARE engraving!! And, you're good at it!
Hello thank you for this very instracctive video new suscriber looking forward for learning a lot from you tho I have studied jewllery more than 30 years ago I havent done any jewellry lately cheers
Have you ever tried to print those plates? I am a printmaker and was curious of the results you could get by doing this. Thank you!
Nice
Could you make a video for this? I mean each and every element and techniques u used for exactly this. Awesome work ✨
Awesome video! Keep it up, you deserve so many more subscribers.
thank you so much! 💖
@@TheArtOfMetalsmithing Your studio is awesome too. I can't wait to see more adventures and projects. =)
Great video, super helpful and informative!
Do you know what the sizes and names of the smallest burrs you're using are? I'm having a hard time finding them
Hi i'm from Indonesia
Thanks for the great video! I have a question. I want to start engraving, and I was wondering do you hand engrave all of your pendants or do you use any other methods such as laser as well? :)
Hi! Do you have an easy way to transfer designs to the metal for engraving? I’m guessing tracing paper and maybe even carbon paper? Not sure if it would transfer onto metal.
Also, do you have the burs yoy demonstrated listed anywhere?
Great question
I would also really like to know how you transfer the designs
❤❤❤
Love it...what about the thickness of the copper ? which one is best?
I bought a cheap dremel from Michael’s. And the burrs leave rough superficial lines that enamel will not stay in but maybe I can still use it to practice having control of my line work.
👍🏻👍🏻👌🏻
There is so much stuff....I want to do and make ... I need a clone.
Hi are you able to engrave inside rings too? Any tips on that project please
Many thanks
What’s best bits to use with rotary tool like you have for engraving motor cycle parts, like primary covers and tail pipe, rims ,,,etc??? Thanks for your time!!!
💯👍👍
Which is the best one to deepen fading lines on a silver pendant?
Another fabulous video!!! Do you have a list of the burrs and where to purchase? Thanks!!
May I ask if you polish your metal before engraving or after you are finished with your design? Thank you for your great tutorials!
Thank you so much Heather! It depends on what type of finish I want to achieve. But usually I will try to have the surface nearly finished before engraving, simply because any additional steps will remove fine amounts of silver, therefore making the lines less deep. So usually the very last stage would be polishing or matte finish :)
Can you please please please give the specific tools and burrs you used, I want to do this kind of drawing/engraving a lot but there are too many types of dremel to choose from, would you have any advice?
If the metal sheet is stainless or normal steel does it work the same? I imagine the toold are steel too, does it work on any metal?
Thank you so much for this video I have been wanting to start using some burs in my work for texturizing. Do you use sandpaper or something else to finish up the design with after using the bur to texturize.?
You need to try it out asap! You'll love it :) yes, I use something, but not sanding paper. I usually use different rotary tool attachments, but not too coarse, as they would affect the texturing. Mostly medium to fine grades of bristle wheel attachments
What type of material should I use to practice stuff on should I flatten a copper pipe in a vice I don’t have equipment to melt small amounts and roll it flat yet
You got wonderful and pretty comments. But no technical questions, really. How do you clean up all the jagged lines? I noticed you did not zoom in on the lines, but I was able to see jagged lines in your demonstration.
Why are you policing other people's comments?? 😂 If you have a technical question, then ask away, no need to get all worked up over what others say. This was a fast demo that was supposed to show only WHAT can be done, not how. Therefore, I didn't pay attention to the whole process, cleaning included. When I make lines on my actual projects, I'm usually not actively filming, so I'm able to focus 100% on the technique, and my lines don't require much cleaning. If they do, I use appropriate attachements for the rotary tool. Hope that helps with your concern.
hello, I enjoyed the video. Can you tell me the speed you use your rotary tool at?
Do you have links for the burrs you use? I'm having trouble finding bits that are best for engraving.
Are any of these burrs sharp enough to cut a shape in the sheet metal if traced enough times? Or would a different tool be needed for that I wonder?
Hmm, do you mean like piercing? If so, it's best to use the jeweller's saw for that and simply cut this space out. These burrs are pretty sharp, so you can use them to make deeper lines/grooves, but I\m not sure how well the would do to essentially drill trhough the metal. I also don't thing that would be a safe job. So better use this for the work on the surface. And use drills to make holes in the metal and jeweller's saw to cut out. Hope that helps :)
For decorative name wich one
What can I use to smooth out metal
:) found it.
Hallo, is there any way to do this on a ring? Would you suggest engraving the metal prior to forming the ring? Or engraving it after the ring has been formed?
with these simple techniques, and for someone who isn't advanced, I would recommend doing it prior to forming a ring. It's much easier! However, if you feel confident, you can try after the ring has been formed! Make sure you have good equipement to hold the ring in one place, like engraving ball for example
Do you ever go over with marker?
Can I use this in my miniature Base wood carving
I have something laid out on a piece of paper which I'm going to put on the side of a water bottle...if the paper is glued down to the metal, will the bur cut through along the lines?
Yes, it will. Although later, after you remove the paper, you might need to fix or deepen the lines, by running the burr through the once again. I usually do that
Hello, I am building some religious and Good luck plaques. I want to do my own lettering on brass plates, what would you recommend using a rotary engraver? Metal stencils?
What do you use to protect your fingers? :)
Heyy! firstly thanks for such amazing tutorial! I have a quick question, do you have any idea for how to erase a line drawn wrong? I’d appreciate your reply or maybe a new video ;) . best of luck 🌸
Fill it with solder or weld.
My best suggestion is to just try and incorporate it. Also I use a vinyl cutter to have “stencils” basically.
You should use a clamp to grip your metal
Amazing!
But I can't hold my burr, it always slides through the metal and ruining my whole piece. I everything!
please help me.
keep up the amazing work.
Did you know to avoid that now?
@@c.dreadz9197 Yes I figured if you moved your hand the opposite direction of the motion of the burr it will work out for you, so if the burr rotates clockwise you move your hand anti clockwise.
I hope you get my explanation.
@@sarahazem9176 thank you so much!
🤝🙏👍😍
I just wanna state that this is amazing. Though is there a way I can trace a picture onto a sheet of metal? It’s for my girlfriend and her favorite animal is a raccoon
Hello, Please I would like to know if you have to draw the design first with a pencil before engraving?
That definitely helps to know where to make the line! So I would suggest using some sort of giude, like the drwaing for example :)
@@TheArtOfMetalsmithing Thank you
Les premiers ne servent pas à graver le métal mais à sertir une pierre ! Mais là, cela relève de la joaillerie !
Me prchej tool what praise
What's the price of these tools?
Hey there I have subscribed to your channel.Please can you tell me what the machine is called you are using to make the patterns with the burrs? And is their a cheaper option to buy? I’m just starting out. Thankyou 😊
This is a speed motor, also called pendant motor or a rotary tool, with a flex shaft. The one I'm using is by Foredom, but Dremel also makes great ones and they're a bit cheaper :) There also other brands available, but I recommend Dremel and Foredom the most
@@TheArtOfMetalsmithing Thankyou so Much ❤️
Where to buy
what speed do you recommend for engraving?
The speed I use with these particular bits is medium. Not too fast and not very slow. It's fast enough to have a smooth line, but not too fast, so I can still control it well. It's better to try it out and see what works for you, get the good feel of the tool. So I would recommend practicing on a brass or copper sheet! Good luck! :)
@@TheArtOfMetalsmithing thanks I used 3 out of 6 and it works very well
@@IsZelev Perfect! :))
What’s the name of your tool how many rpm
Beautiful pronunciation this woman makes English sound sexy.
Thank you for the informative and instructive video.
i dont even know what a rotary tool is