Hand Engraving Quick Tips #4 Pt2- Engraving a Scroll Sampler Plate. Engraving for Beginners
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- In this episode I'll demonstrate how I engraved the master scroll sampler plate that created the castings featured in my last Quick Tip video #4. You can use this video to follow along as you cut your own practice plate.
The castings used for transfer can be found in my web store at:
www.southerncu...
I use GRS Tools in my studio on a daily basis. Here are some links to the tools I use. Most of these will include free shipping and the channel gets a small kickback so you are helping support more content creation.
GRS GRAVERMAX G8- amzn.to/2H0otlq
GRS STANDARD VISE- amzn.to/2ZWeFRa
GRS MAGNA BLOCK- amzn.to/2VL23gi
GRS APEX SHARPENING SYSTEM- amzn.to/2WjNRb8
GRS POWER HONE- amzn.to/2Vdrgkc
GRS BASIC GRAVER SET- amzn.to/2DOu2S6
LEICA A60 Microscope- amzn.to/2DN1Qz6
GRS QUICK CHANGE TOOL HOLDERS- amzn.to/2VL4Hmc
GRS C-MAX GRAVER- amzn.to/2Y5mjq
![[TH] FS vs BME - VCT Ascension Pacific - Lower Bracket Final](http://i.ytimg.com/vi/wnygqsR2Fig/mqdefault.jpg)
Once again, you demonstrate the skills that show evidence of a master. You make the difficult look easy and that is a sign of a master. It's always a pleasure to watch a skilled artisan.
It's always a joy watching you work. You have such a steady hand. Thank you for sharing.
Just wondering if you’re planning on doing any more videos? The tutorials are great, but I’d love to see more of your commissioned work.
Watching you work is a pleasure. Thanks for sharing your skill and experience. 👍
You guys should do some kind of collaboration video!
Youll forever live in our hearts my friend.
??
I love watching your videos. You make difficult work look so easy. You are amazing. Thanks for your inspiration.
Thank you for sharing with us. Very informative and it's great to see master's different techniques.
Thanks for taking the time to share your process....very good / informative. Looking forward to your next video.
Great video as usual. Thanks for uploading. Haven't seen you around for a while, but I've learned a lot from people like you and I hope you keep making videos for upstarts like myself.
The information in this video is going to help me greatly in my leatherwork
Good technique. Seem roughly at first stages but final result is amazing. Cross lines shading attach completeness of composition and looks like old school.
I am looking forward to new videos. I really have learned a lot from watching you work.
Thanks for sharing👍 love to watch You doing this amazing piece of art.
Wonderful video... I've really been wanting to try engraving! Learned a lot just watching. Thank you for posting this
Great stuff. Thanks for sharing your knowledge, very gracious and much appreciated.
Happy to have a new video!
This is fascinating to watch, and I am learning a lot.
I'm determined to teach myself how to do this and this video is very helpful and very appreciated thank you
Are you still practicing now my brother🎉
Amazing work!! This guy is amazing!! He can work on any of my guns 👍👍👏👏👏👏
Layne... thanks so much for the videos... Im trying to learn and they are helping me alot. Thank you and hope you have a great new year!
How's practice going now, man? What tools do you use for practice🎉
Awesome video. Thanks for the info. Your work is beautiful.
Hey Layne! Thanks for all these kick ass videos, I can’t tell you how much they are teaching me.
Just wanted to ask how the rotary hand piece compares to a Foredom? Is it worth adding the handpiece to my collection?
Also, just wanted to give a quick video suggestion! As someone who is pretty new to engraving I have had a lot of trouble finding videos on how to make some of the more uncommon gravers. Maybe you could do a video showing how to make a bunch of different gravers using the dual angle dial on the Apex? I know it would help me out a lot and many others I’m sure.
Great tips video for the beginner. Probably a few good tips in there for someone who's a little more experienced (although I wouldn't know)
The video was, for me, hugely overshadowed by the smooth dobro playing of who can only be Jerry Douglas. I've never heard the piece before but I'd go my house against yours that it is indeed Douglas on dobro and in the CD/LP credits.
Great instructional video! Thank you.
Thanks so much for uploading. I love watching this skill....
Great job sir I really like your all videos awesome❤️❤️❤️❤️❤️
excellent - thank you
MORE THEN EXCELLENT🙏👌
Magnifico, gracias!!!
Great stuff mate
Hi, I just found your videos. I love them. I'm just starting out to do a few things for myself. Would you consider answering some questions? I looked for a school or classes in my area and there are none. Thank you for the videos you already put out. I'm already learning a lot.
Thank you so much for videos
AWESOME
Mr Layne will you be makeing anymore videos? I hope you do sir your craft and art is amazing
Thank you for sharing!!!
Pretty cool! Real well. Arriba la suerte!
I wish they had this on PBS instead of Bob Ross and his happy trees, I would have definitely learned an awesome skill early on in life.
Hello My friend,
Your videos are absolutely amazing.I am a french guy and i would like to begin engraving but My english is approximate and I have some difficulty to understand what tools you use. Can you give me the differents links of the tools you use?
Kind regards Michael!
Que lindo trabajo ánimo espero algún día saber bien aser ese trabajo tanl lindo
got my set, thank you!
Thanks so much
any tips for bulino engraving? What type of graver, dot methods?
thank you Master.
Here I am again with another question. How do you get the shading? I know how the lines are done but, I’m not confident in the shading. Is it a dye, bluing, ???
Thank you again for an amazing video! I need to find out where to get those burs from.
Question were can I get the engraved tips? Also the machine
Just purchased my castings a couple of days ago and I'm looking forward to transfer and engraving them and studying the art and creating a design of my own. By the way what's the name of the music around 6 minutes in to the video?
It’s been years since your last upload. Are you still with us? Would really love more videos/instruction
Glad you like the videos Barbara. I will at some point return to youtube. Between large commissions, teaching engraving at the GRS Training Center and writing a new hand engraving "how to" manual, youtube had to take a back seat for awhile. I hope to get back to it some time in the next year.
@@MasterEngraverTV So other than that you’re doing absolutely nothing!🤣
great video, quite mesmorising, but one question, how do you tell the "cut away" areas from the "STAY" ones, as each side of those lines all look alike!! ( and most likely your head is stuck to a microscope to see what you are cutting).
Congratulations on your work, which black patina do you prefer to use to highlight the engraving?
Amazing wow.
curious if you were still planning on giving us a video about hand push engraving, its the only style i can really afford to do at the moment and i certainly find myself running all over the place at the moment lol
Rich Nelson I do plan on doing something about basics but it’s really something that is best learned in an apprenticeship type setting. Jason Marchiafava offers a hand push video lesson but it’s a fairly expensive set of DVDs and it doesn’t really replace hands on lessons. Hand pushing is by far the most difficult method and takes a few years of cutting straight lines and circles to gain proficiency. Plus you are limited to soft metals. Hand push gravers are only used by jewelers and bulino engravers.
@@MasterEngraverTV yeah I'm a jeweler, just trying to improve since I'm mostly self taught in this area, didn't get nearly enough graver training
Rich Nelson as a jeweler you have a leg up on most. Jason’s video is the most comprehensive lesson available. There’s just too much info to convey on TH-cam. It takes 20 hours of editing to make a 20 min video. So I keep things simple.
@@MasterEngraverTV alrighty I'll check them out, since I can't afford a power system mostly just trying to make sure I'm still doing the basics right, like hand placement and pushing technique.... Your video on sharpening was helpful I think I have been making my heel way to huge and that puts me at a funky angle and makes following the curvature of a ring much harder when I'm cutting a channel, course I'm also doing this all with just a ring clamp, bench pin, and optivisor, so can't get any more bare bones lol
I have all I need now but don’t know how to sharpen new graver
I was almost getting withdrawals awaiting ur video
мастер!!!
Hello Im Looking To Get Into Engraving. The Majority Of People Would Consider Me To Be Artistic. I Have Been Drawing All My Life, Done Tattooing, Airbrush, And Painting. Now I Would Like To Get Into Working Art Into Metal. I Feel I Will Pick Up The Art Very Easy, Just Need Some Tools To Practice And Get Started In The Trade.
So I Was Wondering If Anyone Would Have Some Old Tools, That They Would Be Willing To Give To A Starter.
Thanks And God Bless.
How do you not have 1B subs???
Can you emboss a coin printing template
Awesome information, thanks for sharing!
After your finished with the work, do you treat the job to prevent corrosion? If you do what do you use ?
Texaskid09 09 stainless doesn’t need treatment. Carbon steel guns get blued.
Thank you sir I admire ver much your work and it’s my dream to be on the same road like you thank you
do you sell the template that has the horizontal lines for shading background?
Umm is your video sped up ?or is it real time?
Hi Layne. I miss watching your videos. I hope all is well with you.
Jim H thank you yes. I may produce more this year. I’m simply too busy and they cost too much to produce. Basically a 20 minute video requires 20 hours of editing not to mention the time filming. I may change the format to more engraving related informational.
@@MasterEngraverTV
I totally understand. I can probably speak for all your subscribers, to say that your time and effort is sincerely appreciated!
Where’s that new content? @Master EngraverTv
Hi. Like
👍👍👍
What type of graver is it? Onglette? RRF point?
Diego lindemann it’s just round stock shaped to a 120deg point. GRS Tools sells jigs to sharpen this easily. Steve Lindsay Tools also sells an easy to use jig.
@@MasterEngraverTV do you recommend cutting out the backbone first?
The backbone is always cut first as long as the design allows that. On more complex work where many leaves cross over the backbone that becomes impossible.
C'est sûrement très très très beau et très intéressant mais c'est dommage qu'on en a pas en français il devrait y avoir un traducteur encore merci
Too much machines...
Вот много показывают подобного . Считаю что с пневмо ты не мастер ты мастак . С пневмо любой дурак сможет при нужде . Хочеш удивить руками коллега руками .
Is he dead or something?? Seriously! 😐
Busy man.
I'm very patiently hoping that you'll go back to making and uploading videos 🙂
When I first started watching your content I was deployed to the middle east and it was a great way to pass the time and learn something new. Your editing, the calmness of your voice and superb talent at engraving is captivating! Loved the music in the background as well. I sincerely hope all is well in your world 🌎
صديقي لماذا لا تنشر اعمالك الجديدة
Nice to meet you, I am Japanese and I have started studying engraving.
My question is, where can I buy such a draft of an artwork?
I have tried searching on Amazon, but I can't seem to find anything, so I would appreciate it if you could tell me.
Good afternoon, first of all I would like to congratulate you on the beautiful work. I live in Brazil and would like to have a .45 acp 1911 pistol with your work. I would like themes related to the Brazilian Empire. How do I purchase a product of yours?
Awesome work! What graver do you use for shading the leaves?
Will you do a video on gold enly in the micro small numbers and letters? Thanks!
Do you use the same gravers on guns that you use on the practice plates?
Why did you stop making videos, everyone really enjoyed them.
Great job nice to watch a true master in his field. Impressive
Is this man still around??
4 YEARS AGO 😢???!!!!!!!!!!!!!!!
Where can we buy the tool's ?
Very very nice 👏👏👏
Золотые руки👍🏻
I so want to do this.
Oh man, u changed my mind from engraving stones to engraving silver 😅
Thanx for sharing ur exp⚘
Can you please give me some information how I can build one of those hand Engraving guns myself??
Really a pleasure to watch your skills and you clear instructions as you go alone. I have a couple of questions, or requests. 1. would you take some time to show in more details the tools you use, as it is hard to get a picture of them in the close up engraving. 2. I mostly find it hard to pick up names of people and their other channels like Instagram as my hearing is not great. maybe add these to your video in text would be great. My interest in engraving is to try some on knives or axes that I make. My late father was a watch maker and jeweller. He used and electric engraver. We used to get your style of engraving done with a master engraver up in Belfast, that N. Ireland where I live. I have a gold ring I got for my 21st birthday back in 1978 which was hand engraved, it is beautiful. Thanks again for taking the time to share you craft, I really appreciate you skill and time to communicate it. Hugo Dale N. Ireland.
thank you so much for sharing your valuable knowledge ✌🏻
Le quedo hermoso esas dos formas ,gracias por compartir tus conocimientos eres un buen ser Humano te Felicito con Ud se aprende mis respetos MAESTRO.
👍👍👍👍👍👍👍👍👍👍👍👍👍최고입니다,
Seu trabalho é incrível..........Your work is amazing.......
Really enjoy the demo Layne & I will need one of those line transfer plates, again, thanks
Amazing, thanks.
Love it ! Thanks
Amazing work! I don't know if I heard you mention it, but what graver do you use for the shade lines?
Nolan Gaudreau I used a 120 for all of this but a 105 or 116 would work fine. The 120 is a little hard to learn to use.
@@MasterEngraverTV Got it. Thanks. I'm still pretty new to this, but I'm learning!
Is master engraver tv ever gonna post new videos?
angus leahy working on changing the format of the channel. They are simply to time consuming and expensive to produce in the current form. 20-30 hours of work for a 20 min video.
@@MasterEngraverTV gotcha, I can understand that completely. I appreciate efficiency and strive for it myself so I definitely get it, I really appreciate you taking the time to respond and look forward to more videos in the future! i still havent decided between the GRS and Lindsay gravers but plan on acquiring one soon. thanks for the inspiration!
Were you using the 120 degree graver for the shading section? Lovely work, thanks for the clip!