Very nice demonstration showing the different camera setting options and how they look. Well done. I don’t know some people have been saying that the image sucks on the ZMP and that the ZMSE is better... As you can see here, the video image quality is much better than the SE version. It’s all about setting the parameters to your liking. Thanks again for making this video my friend. Bravo! 👏🏻👏🏻
Thanks, I think that this type of image doesn't show the weakness I use to see that is parts of the image get blurred (dark green leafs with dark green background, adding some movement). Anyway it does look good and encouraging having in mind this is my first proper (over 60€) drone. And I bet on the potential for having great image quality based on specs (and previous drones firmware improvements).
You can turn this image in post to look like a Mavic 3. I think the video details is good enough to confuse people after post. Use my print-out gray-card and in post you will get perfect colors. In one click the colors will calibrate and than color grade to look like the Hasselblade colors. Upload and say it was from Mavic 3.
Eu uso o Shotcut em Linux (Ubuntu) para editar o video que por acaso tem uma função de Color grading mas acho que é um bocado limitado, pelo menos dos testes que fiz e peguei nuns video clips em HLOG não consegui dar-lhes uma cor muito boa. Eu já pensei em imprimir um cartaz desses que falaste mas para isso deve ser preciso ter uma calibração da impressora e tb é um bocado chato que o drone não liga a imagem da câmara antes de levantar voo, que dava jeito para fazer estes ajustes antes de levantar, mas um dia tenho de experimentar fazer qualquer coisa. Também continuo a testar as novas versões de firmware e com esperança que melhorem o processamento de imagem em alguns pontos que com certos tipos de imagem podem ficar esborratadas. Mas o hardware do drone tem potencial para fazer bom video, foi o que me levou a comprar este drone (e também por ter menos de 250g que facilita obter autorizações em certas zonas).
@@MiguelSilvaX You don’t need to calibrate the printer, the gray card will be enough to get very good colors and only they you do the color grading. Most editor you can pick a white color to fix the white balance but in this case you pick the gray color that your print prints out unless the printer in low in ink.
Muy buen video. He estado viendo otros videos tuyos debido a que quiero comprar este Drone. Si ha mejorado, al menos yo, no he visto el efecto gelatina.
Yeap, it's in the old part of town, somewhere between the new zone (Parque das Nações in the north part of Lisbon) and the city center (down town). This type of image seems to look good captured with this drone, but I didn't venture going much further because I was not very sure this firmware was 100% stable.. in the end it did behave very well.
Hey Miguel,well done! I prefer Natural or Sunny with contrast 4 and HDR.number external fw Is a bug of app when you Will do next update return right. For you, work well new values default of PID that hubsan has changed? I think not bad 👍
Yeap, I was hoping to do another firmware update to solve the strange version reported by drone before making this video for testing the new improved HDR... but Hubsan still didn't release a new version and I had this "Sunny Day" to test on weekend. Yes these default PID parameters (from version 1.3.8 and 1.3.9) seem to be working great on my drone.
Until this moment I still didn't change the PID parameters, I know Hubsan has changed these parameters in last few versions but I didn't change them, so maybe it's matching the recommended (or default?).. but after version 1.3.8 I feel those PID Hubsan choose worked better on my drone, I'm not sure they will be the best values for everybody because there might be slight changes in propeller weight balance, rubber fitting/stiffness, and even a slight diference in camera flex cable pressure might change optimal PID parameters. What I think os that each machine has it's own optimal parameters, maybe 90% of these drones will work 90% of the situations (wind speed, going up/down, etc) without noticing jello using a range of PID parameters, but not all will be in the centre of that range (in it's optimal parameters)..
Same happened to me, after trying to update to 1.3.9 my drone won't reboot and also now shows the version as 1.2.6. Hubsan told me that even the version is wrong I'm running the 1.3.9. I hope next update fix this
Very nice demonstration showing the different camera setting options and how they look. Well done. I don’t know some people have been saying that the image sucks on the ZMP and that the ZMSE is better... As you can see here, the video image quality is much better than the SE version. It’s all about setting the parameters to your liking. Thanks again for making this video my friend. Bravo! 👏🏻👏🏻
Thanks, I think that this type of image doesn't show the weakness I use to see that is parts of the image get blurred (dark green leafs with dark green background, adding some movement). Anyway it does look good and encouraging having in mind this is my first proper (over 60€) drone. And I bet on the potential for having great image quality based on specs (and previous drones firmware improvements).
Xq giras tanto se delicado. Suavidad... Un buen video esa es su principal manera.
Yeap I forgot that I could use the Film mode to slow down yaw speed and make it a smoother movement, maybe next time I remember ;)
Top, obrigado por demonstrar oq mudou nas atualizações...
You can turn this image in post to look like a Mavic 3. I think the video details is good enough to confuse people after post. Use my print-out gray-card and in post you will get perfect colors. In one click the colors will calibrate and than color grade to look like the Hasselblade colors. Upload and say it was from Mavic 3.
Eu uso o Shotcut em Linux (Ubuntu) para editar o video que por acaso tem uma função de Color grading mas acho que é um bocado limitado, pelo menos dos testes que fiz e peguei nuns video clips em HLOG não consegui dar-lhes uma cor muito boa. Eu já pensei em imprimir um cartaz desses que falaste mas para isso deve ser preciso ter uma calibração da impressora e tb é um bocado chato que o drone não liga a imagem da câmara antes de levantar voo, que dava jeito para fazer estes ajustes antes de levantar, mas um dia tenho de experimentar fazer qualquer coisa. Também continuo a testar as novas versões de firmware e com esperança que melhorem o processamento de imagem em alguns pontos que com certos tipos de imagem podem ficar esborratadas. Mas o hardware do drone tem potencial para fazer bom video, foi o que me levou a comprar este drone (e também por ter menos de 250g que facilita obter autorizações em certas zonas).
@@MiguelSilvaX You don’t need to calibrate the printer, the gray card will be enough to get very good colors and only they you do the color grading. Most editor you can pick a white color to fix the white balance but in this case you pick the gray color that your print prints out unless the printer in low in ink.
Muy buen video. He estado viendo otros videos tuyos debido a que quiero comprar este Drone. Si ha mejorado, al menos yo, no he visto el efecto gelatina.
What a fantastic place to fly. Is this Lisbon by any chance?? It looks familiar....
Looks like Hubsan drones are improving nicely...👌🏿👍🏿
Yeap, it's in the old part of town, somewhere between the new zone (Parque das Nações in the north part of Lisbon) and the city center (down town). This type of image seems to look good captured with this drone, but I didn't venture going much further because I was not very sure this firmware was 100% stable.. in the end it did behave very well.
Nice👍🏻👍🏻
Hey Miguel,well done! I prefer Natural or Sunny with contrast 4 and HDR.number external fw Is a bug of app when you Will do next update return right. For you, work well new values default of PID that hubsan has changed? I think not bad 👍
Yeap, I was hoping to do another firmware update to solve the strange version reported by drone before making this video for testing the new improved HDR... but Hubsan still didn't release a new version and I had this "Sunny Day" to test on weekend. Yes these default PID parameters (from version 1.3.8 and 1.3.9) seem to be working great on my drone.
HI Miguel, have you changed PID settings in this video? Recommended, defauIt or customized?
Until this moment I still didn't change the PID parameters, I know Hubsan has changed these parameters in last few versions but I didn't change them, so maybe it's matching the recommended (or default?).. but after version 1.3.8 I feel those PID Hubsan choose worked better on my drone, I'm not sure they will be the best values for everybody because there might be slight changes in propeller weight balance, rubber fitting/stiffness, and even a slight diference in camera flex cable pressure might change optimal PID parameters.
What I think os that each machine has it's own optimal parameters, maybe 90% of these drones will work 90% of the situations (wind speed, going up/down, etc) without noticing jello using a range of PID parameters, but not all will be in the centre of that range (in it's optimal parameters)..
@@MiguelSilvaX i totally agree with you
Same happened to me, after trying to update to 1.3.9 my drone won't reboot and also now shows the version as 1.2.6. Hubsan told me that even the version is wrong I'm running the 1.3.9. I hope next update fix this
Thanks, I hope so, and they should have a web page where we could check new versions released...