Let's Go!!! New Project Build Reveal! This will be awesome...
ฝัง
- เผยแพร่เมื่อ 19 พ.ย. 2024
- Come along for the ride as I DIY build a daily streetfighter to be proud of!
If you missed out on the giveaway, get the Razor Scraper here: horusworks.com...
Hope you liked the reveal video... and don't forget to sub and like to get notified of new content coming soon!
If you'd like to support the channel, pick up some work gear at:
www.horusworks.com
Socials:
TH-cam: / @horus_works
Rumble: rumble.com/c/c...
Facebook: / horusworx
X: / horus_works
Insta: / horus_works
TikTok: horus works
Disclaimer:
This video is made to entertain and guide you in your car journey. I hope you’ve learnt something new like I have by watching this video. Please note however that you are solely responsible for trying the techniques displayed. Please follow proper safety practices and understand that this channel is not responsible for any damage caused to you or your property when following along with the channel’s content.
It's been ages! Welcome back to TH-cam mate!
Thank you, brother. I took a break for a while 👍
Welcome back 👍, new project is looking good already
Thank you mate, I appreciate your support 👍 it's been a good break, but it's time for some new DIY builds...
I can't genuinely say "Rexies are awesome" because I went down the Evo 7 path. We would've been track day rivals. Good luck with the new project.
Nothing wrong with a bit of friendly rivalry 😂❤ and as far as I'm concerned you said it anyway!! If you're in Aus, find me on X, Insta, or FB (just search 'horus works') and DM me your postal address... a new 2-pack of scrapers will be on their way to you tomorrow... thanks for your support! 🫡
@@Horus_Works Over in Mannum South Australia. With the Focus track day car.
Happy see you again 👍
Thanks brother, I'm back after a break :)
i did a budget build on mine. i recommend oem 20mm 15+ wrx rear sway bar, sti front lower control arms, and the 15+ sti power steering rack, which has much quicker steering ratio. All oem mods that will make the car handle much much better. i also did a legacy gt brake swap up front using 15+ wrx calipers, brackets, pads, and rotors form a 2008 legacy gt with 17" wheels, this gets you a 316mm front brake rotor on the cheap!
That is some excellent info!! Very much appreciated!
👍
By the way, I'm assuming you went this route with the brakes because of the 5x100 lug pattern correct? To avoid the 5x114.3 lug pattern on an STi?
@@Horus_Works correct! Thats why I used a legacy rotor. Much cheaper than brembo’s or the 4 pot/2 pot conversion. I saw your post on the Facebook group 08-14 wrx owners about your build. If you search legacy gt brake swap on there I made a post about it. It got some hate on the comments but I’m really satisfied with it.
@@noredcr thanks for the info mate - I'll definitely look into this...
wrexies are awesome!
Hey Harry, are you located in Aus?? If yes, congratulations - I have some razor scrapers to send your way!!
Message me on either FB, Insta or X, and I'll get these shipped to you once I have your postal address...
Cheers, Erik
Links:
FB: facebook.com/horusworx
X: twitter.com/horus_works
Insta: instagram.com/horus_works/
Good to see you back at it, and what a good choice of car. For me the first upgrade would have to be a set of coil overs to get it sitting and handling just right.
Not a bad idea... it's definitely on the list! Thanks for coming back to watch the latest :)
@@Horus_Works - as a fellow owner of a mk1 Focus it was always good watching the progress of yours.
It’s inspiring to start documenting some of the changes to my Mk1 Focus ST170 estate. 😁
@@r7bkr glad to hear that I'm a positive influence! Document away my friend, the MK1 is a great car and worth saving.
WRX for the win!
Hope you enjoy the vids mate, thank you. More to come :)
Great my friend
Wrexies Are Awesome- love the new project, looking forward to following this series and seeing what you do to it. 😊👍
Thank you brother - the scrapers are gone, but I appreciate your support - many more vids to come so I hope you check them out :)
Welcome back!
Thanks mate!
Sweet new project! We need more Cobra videos though!
If King Chrles talk with he's plants, It's fine if you talk to your car.🤔
Welcome back 😃 and good luck.
Thanks! 😃
"Wrexies are awesome!"😊
Thanks for watching Laci!! 😊 If you're in Aus, find me on X, Insta, or FB (just search 'horus works') and DM me your postal address... a new 2-pack of scrapers will be on their way to you tomorrow... thanks for your support! 🫡
@@Horus_Works Welcome back. Thank you, but i live in Hungary🙃
A shame, but thanks for your support anyway mate!
Wrexies are awesome
Well done sir!! If you're in Aus, find me on X, Insta, or FB (just search 'horus works') and DM me your postal address... a new 2-pack of scrapers will be on their way to you tomorrow... thanks for your support! 🫡❤
Feel free to message me on any of these Markus, and I'll get the scrapers posted to you asap:
Links:
FB: facebook.com/horusworx
X: twitter.com/horus_works
Insta: instagram.com/horus_works/
Wrexies are awesome, it would look great with black wheels .👍
Thank you legend! The scrapers are gone unfortunately, but new wheels coming for the wrexie VERY soon! hope you check out the vid when it lands...
primitive racing makes aluminum skid plate/under trays for these cars.
Thanks for the heads-up, I'll look into it! 👍
Might I suggest upgrading the lights in your garage?
Yeah they are well overdue for an upgrade... good point 👍
column shift falcon utes are better than wrexies
@hemichump in some ways they absolutely are 😉
Welcome back I's wondering where you disappeared too.
Thanks for noticing! I just took a break to recharge :)
Great to see you back mate. Nice job on the clean up, intake, coil overs and wheels. Then just a general tidy up with some tasteful mods that you do so well 🤙
Thank you brother, life got in the way but I'm back! I like your suggestions for the wrexie BTW... looking into all of it now!
@@Horus_Works life can do that, end of the day you gotta do what is best for you. I’d love to spend all day everyday on my project but the reality is that’s not viable. You always do clean work on your cars
@@crazygoosegarage9586 yep, wish we could do this for a living, but hey, we can't all be restoring McLarens I guess... ;)
@@Horus_Works I’d still choose shit boxes 😅 McLarens are too fancy for me
@crazygoosegarage9586 same!... but this is why you and I have dozens of subs not millions bud 😅
Cool
Appreciate it :)
Wrexies are awesome!
Great video brother, awesome to see you back at it 🙌
Btw, is the Alfa still around?
Thank you legend! The scrapers went quickly, and unfortunately so did the Alfa!! Someone made me an offer on it that I couldn't refuse.. haha. But I have plans for a Busso in the future!...
@Horus Works Not see you for bit. Hope The Focus not be sold.
The Focus is perfect the way she is so no videos for now... but I'm considering another Focus later on... ;)
wheres the ute
She's gone brother - but I need another ute!!
th-cam.com/video/OJmhUyyf56w/w-d-xo.htmlsi=hqJbFHyITw4cRREk
Sold the Cobra ?
Yep it's gone buddy - I could not bring myself to modify such a rare car... It went to a very good home.
How about the Focus?
@@LeafarR1657 she won't break any more, so I can't make any more videos lol... but I'm considering another Focus :)
most likely a repossession or stolen vehicle and auctioned off?
It was a private sale, but the previous owner didn't have it for long, so could not tell me the service history.
This wont be no budget build Subarus are exspensive on parts shit to work on ive had several . Swap it for another ute save yourself the headache
Thanks for the tip!... I'm getting my Subaru fix for now - rain, hail, or shine, I'll document what happens here... one thing I'm certain on, no matter what other cars I have, I need me another ute! 😁
@@Horus_Works I’m going to put a 302 v8 in my ford courier . Spoke a engineer hes said toatally doable and legal should be a weapon lol
@@shaynewilliams2594 yep a few people in the states have done exactly this! She'll be a weapon mate... but reinforce the subframes where the new engine mounts will go - apparently the ones in the ute need a bit of strengthening to handle the extra weight of the 302.