With the 2011 wrx hatch since there is rear wipers that un used grommet in the video is gonna be used… so what I did was drill a hole like a inch under the harness using a step bit and ran the wire through that. Other than that this video made it simple 👍
you would do this to prevent noise. I can’t remember if it’s called ground loop or if that’s something else, but you would do it to avoid feedback noise or static
Hi I'm wanting to do my car it's a subaru could you give me a estimate about how much wire i would need... you look so professional really beautiful job
You don't have to pull your seat up you can run all your wires underneath the plastic trim along the sides of your car this guy is going above and beyond where you need to and for 20 years I've never ran an inline fuse and never had an issue I had two 18s with 4,000 watts of power running to them didn't have an inline fuse
Parts used linked in the description of the video!
Of course you need to pull apart the wheel well.... nothing is ever easy with a Subaru.
With the 2011 wrx hatch since there is rear wipers that un used grommet in the video is gonna be used… so what I did was drill a hole like a inch under the harness using a step bit and ran the wire through that. Other than that this video made it simple 👍
Is there a fuse I can tap into as the remote
I've read you should run the rca and remote cables on opposite sides of the vehicle. You ran them together and taped them. Can you explain why?
you would do this to prevent noise. I can’t remember if it’s called ground loop or if that’s something else, but you would do it to avoid feedback noise or static
Perfect, now I can do this in reverse to remove this stupid sub in my STi.
😂😂
Good detail in your videos. I’m thinking of upgrading my stock radio to something better with amplifier and sub
si tienes que cambiar un fusible tienes que desconectar el cable de fusible
And its the same on a 2010 boxer diesel with the sport package?
Nice how do remive the fender cover
Hi I'm wanting to do my car it's a subaru could you give me a estimate about how much wire i would need... you look so professional really beautiful job
Sure, send us a message on our instagram or Facebook page and we can help you out.
How did you figure out where is the rem wire?
How much power wire did you use?
About 12 feet to under the driver side front seat.
hey looking to do the same sort of install on my wrx, how did you mount the amp under the seat?
Finish the video... 🤣
You don't have to pull your seat up you can run all your wires underneath the plastic trim along the sides of your car this guy is going above and beyond where you need to and for 20 years I've never ran an inline fuse and never had an issue I had two 18s with 4,000 watts of power running to them didn't have an inline fuse
#TeamNoFuse #TeamFireHazard
@@ProvoBeastAudio some people hey? save $10 not installing a fuse and risk burning your car to the ground. 😂
this the kind of guy that tell you his system in peak watts not rms lmaoo
2 18s? 4k? No fuses? Uh-huh sure tell me more about your mediocre budget sound system 🤣🤣🤣
he must mean 4k watts as rated by boss audio