Upgrade the Range of Your Airsoft Gun (4K)
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- In this video, we discuss how to improve the EFFECTIVE RANGE of your airsoft gun. We hope this video helps you out in choosing between some upgrades for your setup! Happy upgrading!
If you liked the video, please subscribe!
Visit the Ordo Airsoft Instagram page:
/ ordoairsoft. .
Click to view the channel: goo.gl/2EKDeJ
~-~~-~~~-~~-~
Latest Gameplay Video: Airsoft Two-Man Fireteam - Squad Wipe "
• Airsoft Two-Man Firete...
~-~~-~~~-~~-~
Few things to keep in mind:
1: With longer barrels you get more muzzle velocity UP TO A POINT!
The stronger the spring, the longer this max length is, but for 1,5 joule (400fps) max AEGs the max effective barrel length is around 350mm. Longer could work (i have a 500mm barrel on an ACR) but usually not needed.
2: Tighter barrels do in fact increase muzzle energy. What they also do is they mess up your accuracy with the smallest amount of dust if they get dirty. 6.01 mm is way overkill. 6.03-6.05 mm inner diameter are much more reasonable, since you can allways increase velocity with a stronger spring, just make sure your motor/gearbox can handle it.
that intro gave me a migraine
I went to heavier BBs. A different hop up or barrel will be next. :)
A tire board may increase FPS, but it will not increase your accuracy at range at least. If you have a gun that You built for CQB by all means 6.01 and it because you're going to be shooting that far with it anyways a regular ED just put a 6.03 but first really trying to go out really very far 6.05 or higher. For HPA get a wide bore. You can also get that in an AEG but you're going to need a bore up system bore up system
Play with the maximum power bb and battery what your gun is capapble and everybody will have a good time
This video is under rated. Thank for such great explanation!! I need to know the things you explained and why each is essential for the purpose 👉💥💥💥
FPS is only a difference between +/-10 mtr. You can have 360 fps fully upgraded vs a 450 fps stock the shoot almost the same
The higher your FPS, the faster the BB gets to the target. The faster the BB gets to the target, the less time the target has to react to get into cover. In our opinion, this increases the effective range since the target's reaction time is reduced, giving you a slightly larger window of opportunity. Ex: at longer ranges, an enemy may hear your shot and duck into cover before the BB arrives on target - in this situation, even if the gun is dead on accurate, it is still outside the gun's effective range since the projectile does not get to the target fast enough
@@OrdoAirsoft I've always had the same opinion.
Range is distance of travel
Bro cylinder porting is a factor too
It sure is. I have a 290mm 6.02 and 370mm 6.02 barrel that are using maple leaf mrhop buckings. I have noticed my vm4 runs about 10 fps higher with the short barrel due to cylinder porting and bb drag. Remember each airsoft rifle is its own animal so find out what works best for your setup. Awesome content!
my fusion shoots so bad because of the allignment lol
Hey there good sir! I have Kwa Ronin T6 and I want to improve it.
So far I've swapped out stock spring to Maddog M150 and swapped barrel for Madbull 6.01mm, it helped but BBs are still slow travelling and at distance they go off in different direction.
Could you please provide me with list of upgrade parts ? I would highly appreciate it!
Upgrade your hopup chamber and change the nub to a flat hop. As far as the bbs being slow traveling that's an FPS issue.
@@OrdoAirsoft Thank you for response! I've ordered Flat Promi Red bucking (Hard for BBs 0.25 & up) + Flat Promi Nub (Soft + hard).
Which exact hopup chamber would you recommend ?
@@DanielBerthellemy ik this is 3 months late but in case you hadn't ordered one yet prowin is a great OG hopup unit. Same one as in the video. If you're looking for some fancier you could try a Maxx but imo start with prowin
🔥
Fax