Stacey David's GearZ Quick Tip - Take A Few Extra Minutes & Do Things Right

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ส.ค. 2012
  • Stacey talks about the importance of taking the time to do things right the first time and not settling for, "it works fine." Especially when it comes to thing electrical and fuel related. These will always come back to bite you.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 11

  • @HARMARSCH2
    @HARMARSCH2 12 ปีที่แล้ว

    I had a problem with my S10 Blazer V8 Conversion, for no apparent reason the 10 amp fuse for the fuel pump started blowing. My brother who I bought the truck from came over and we looked for the cause. After tracing back to the fuel pump making sure the wires were good,we found the culprit two small wires and 1 very hot connection. We cut the connection out made a new one properly.Two small wires that could've caused a huge problem,they were at times barely making any contact.

  • @SamnissArandeen
    @SamnissArandeen 11 ปีที่แล้ว +3

    This is not a Quick Tip. This is basic shop rules.

  • @jjlwis
    @jjlwis 12 ปีที่แล้ว

    true story... I've fixed so many of other peoples mistakes...

  • @shartne
    @shartne 12 ปีที่แล้ว +1

    How about showing us how you fixed it.

  • @blueeyesseto
    @blueeyesseto 11 ปีที่แล้ว

    one of the things that is missing from most Wiring jobs is common sense ive seen earth wires running a further distance to a bolt on something instead of going to the battery some people need to stay away from cars for everyones safty

  • @ransferd
    @ransferd 12 ปีที่แล้ว

    how about a vid that shows how to do the wireing?

  • @rwdplz1
    @rwdplz1 12 ปีที่แล้ว

    I've seen DIY wiring jobs that keep me up at night...

  • @kenman1717
    @kenman1717 11 ปีที่แล้ว

    anytime I have to fix some kind of electrical, I usually run into stuff like this or after its got bad with corrosion because of all the open air connections or scotch lock connectors. seriously why can't a person take a few extra minutes to solder wires or at least use crimp connectors that have the heat shirk and glue all in one, to avoid wiring problems.

  • @Eslamizar
    @Eslamizar 12 ปีที่แล้ว

    hahahahah quick tip telling you to maintain your wiring lol very funny.

  • @BillyInnes
    @BillyInnes 12 ปีที่แล้ว

    Why put off today what u can do tomorrow lol

  • @UBBERTANKER
    @UBBERTANKER 11 ปีที่แล้ว

    i have seen worse and it was a kids truck who went to college to be a auto tech lol