An Idiot Installs Modern Technology Into An Old Race Car - ECUMASTER PMU-16

hopefully some useful information if you can stay tuned long enough.....
I've installed this pmu-16 from ecumaster to simplify the wiring and to remove the old and heavy fuse/relay box.
I wire in a couple of circuits and program them in, but not without issue....
enjoy watching and make fun at my expense.
PLEASE LIKE, SHARE AND SUBSCRIBE TO THE CHANNEL.
Subscriber Count : 1213
Instagram : GregElgood
Email : [e-mail]
#ecumaster #pmu #racecar

[@GarDjinn]

Hi Gregory dont forget the amps will change when the engine is running ur prob around 12.4v not running the engine and around 14v running the engine this means when the engine is running it will use less amps so for example 2x65w bulbs would be 130w so 130w divided by 12 would be 10.8 amps but at 14 volts it would be 130w divided by 14v equals 9.3amps

[@gregoryelgood]

Thanks, yes that's a good point....

[@GarDjinn]

@@gregoryelgood can u please fix the mgf ive got withdrawals. in your last mgf trying to check what was wrong you did a compression check and it failed think thats the prob i think you may of forgot thinking spark or fuel all best

[@cameronnorris5104]

@gregoryelgood Is there's anyway to program the pmu so some outputs are constant hot? What if we made the pmu16 power up input constant hot and set it so when the Key power input loses power those allocated outputs remain powered up. I'm installing one into a customers car now. It's my first time with pmu16

[@gregoryelgood]

@cameronnorris5104 not really sure how you would do that, I found the Facebook group really helpful