How To Lubricate A Centrifugal Clutch (How To)

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 มิ.ย. 2021
  • Hope you enjoyed
    ********Disclaimer********
    Please do not try to re-enact or recreate anything you see in these videos.
    Guido does not take any responsibility for injuries or equipment failure created by doing so.
    ALL GUIDO CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
    #minibike #pleasesubscribe

ความคิดเห็น • 52

  • @Guido19
    @Guido19  3 ปีที่แล้ว +4

    Hope this was helpful!👍

  • @beaubrummelmotorizedbicycles
    @beaubrummelmotorizedbicycles 2 ปีที่แล้ว +17

    If you have a cheap Chinese centrifugal clutch with a steel bushing, I guess you can use grease. But using grease means you will have to take clutch off every time you need to re grease it. Basically a waste of your time as the grease does not last. If you upgrade to an American made clutch like a Max Torque or a Hilliard clutch you never use grease. Using grease on a "oilite" clutch bushing renders it useless. A oilite bushing is a oil impregnated bronze bushing that needs 30 weight motor oil or equivalent. The bushing releases oil as it heats up. You can oil the bushing while the clutch remains on the bike either inboard or out board, simply apply a couple of drops at the snap ring. For inboard clutches I use a flexible oil spout. Every 2 hours of clutch use is usually recommended. Once in a while you;ll need to remove clutch to clean it of dirt and grime that accumalates in the shoes and drum. Only use WD 40 to wipe off shoes and drum. If a slight ridge is present in the drum use some fine sand paper to smooth out the drum. Spend your time riding, not greasing a clutch.

  • @CristianGonzalez-kv2ts
    @CristianGonzalez-kv2ts 3 ปีที่แล้ว +4

    yes, i needed this for my minibike !

  • @metalkokorea

    good

  • @LucksOutlaw

    is it fine to ride if my clutch is missing the two alan keys that tighten it down they flew off when i was riding once and just havent put any more on so im hoping its okay😅

  • @jaydee659
    @jaydee659 3 ปีที่แล้ว +5

    Just a creative criticism, for a video like this maybe an overhead steady shot would be better than such a moving camera. Food for thought. A work table/bench with an old towel on top.

  • @travis48g

    Only grease the shaft.Good life advise.😂

  • @Champineer

    Can I use 10w 30 motor oil for it?

  • @Dannyaudio69
    @Dannyaudio69 ปีที่แล้ว +2

    Can i use bearing grease as well?

  • @itbelikethat7143

    Go kart wants to take off when started is it the clutch thats the problem

  • @isaacmartinez3311

    how often should I lube my clutch?

  • @LEXI3000music
    @LEXI3000music 2 ปีที่แล้ว +2

    You forgot to put the chain back over the clutch sprocket before you put the clutch back On!

  • @mrjaybennett80
    @mrjaybennett80 ปีที่แล้ว +1

    Can I use Vaseline? I have a ton of that.

  • @pursang101
    @pursang101 ปีที่แล้ว

    Or you could use 2 or 3 drops of oil like you should.

  • @ibetthefbicantfineme1372
    @ibetthefbicantfineme1372 2 ปีที่แล้ว +1

    Dam remember when his voice sounded like 🐿

  • @kbeezyyyy_5069
    @kbeezyyyy_5069 ปีที่แล้ว +1

    can i use wd40 to lubricate it?

  • @sayblaze
    @sayblaze 3 ปีที่แล้ว +3

    You put the clutch on backwards Iol

  • @brian-yx8hq
    @brian-yx8hq ปีที่แล้ว +1

    I put grease and it gets pushed out😂why😅

  • @curtstauff8982
    @curtstauff8982 ปีที่แล้ว +1

    IMHO WAY too much grease. Good idea, just too much.

  • @lilteenigga5318

    I don’t think u need to grease tha motor shaft tha clutch doesn’t spin around it it spins together