Installing A Centrifugal Clutch
ฝัง
- เผยแพร่เมื่อ 9 ส.ค. 2017
- Today on Elliott's Shop, I will show you how to properly install a Centrifugal Clutch on most common go-karts. Your kart may vary but this covers the basic procedure. Please like and subscribe!
Love the detal in the video
Nice work. Enjoyed your delivery
Very well explained. Thanks!
Hi mate very well executed, have a quick question what size clutch are you using? Have the same motor 5hp . Thank you Ray
Is there a clutch that can start at low rpms? I just need it for starting the engine, because it's connected to a heavy equipment and I don't have the strength to pull the rope for starting. If I could have the shaft off the load get it started and immediately have the clutch engage at full power...
Thanks this helped I’m building my own go cart
This young guy knows more about fasteners and mechanical business than most 20 year olds these days. Keep turning wrenches buddy.
u r genius man !!!
Could a warped axle cause a loud noise and/or problem with my clutch?
Do all the new clutches come with a key already in it? Thanks
This was a good installation video! Nice job 👍
I have a mini bike that has a clutch without set screws and it has no hole for a bolt in the crankshaft
Just look at the state of that damaged Keyway on output shaft. Definite incorrect fitting of clutch. Where is the shaped washer that fits onto the output shaft?
Yes. It's called a Conical Washer. It should be the first part that goes on the shaft. It puts the clutch the proper distance away from the engine and also will keep the keyway from being destroyed like this.
Great call!
I simply love how he's only 12 years old but has the common sense of a 60+ year old boomer you you would probably go to for help on old school stuff anyways
Does this clutch have a built in key?
He says so in the video.
@@belizeanbwoi6722 i missed that, thanks
No sound
Why has no ones ever shown how to take it off?
You just take the bolt at the end of your shaft off and then pull it backwards and its of
Mine was either melted together but it never want to come out. Tried cutting with a grinder and just made it worse
@@javybavy what kind of engine dide u have
@@javybavy i have a honda gx160 and i need a clutch but idk what the boring is my axel is 20mm(im eu) i think my boring needs to be 3/4”
cause that is what i can find on google when i search “clutch honda gx160”
@@sylvainitsjustsyl4549 I really dont know here is me trying to fix it. I bought both the 3/4 first and was not the right size ended up and being 1". But was not able to take off the old one
th-cam.com/video/cGIXKYy94iE/w-d-xo.html.
Very bad
shut up