What are your preferred springs in your DSG and other high rof builds? Iv been having issues with unequal springs buckling after short use on the piston end. I'm curious if you use equal or unequal and what's your preferred brand. Thanks
Normally just shs unequal springs in the red packets because they’re available everywhere. Are you running a mosfet? Do you turn precock off when it’s stored? Sometimes I get a very slight bend after a while but nothing really concerning.
Yea I always have pre cock turned off before I finishing using the blaster. Have spring retainer with the bearing and still have had 2 springs a 1.38 and 1.28 ausgel bend badly after only 15 minutes of use
The silver looking thing? I got it from powair6, it’s meant for AS so I had to drill it out to take a larger OD barrel. Then I just sanded the black off to expose the naked alloy
I really hope it does as i would like to re use it as it’s still good and works great, i was told that they need a slight mod but if you ever put a bigrrr in an mk v2m i would definitely would like to know! Thank you
![เปิดบ้าน เปิด Supercar อั๋นโอกิ เคยเอา rolls Royce เเลกพระ องค์ละ 100 ล้าน l [Nickynachat]](http://i.ytimg.com/vi/FeGwJwXauZ0/mqdefault.jpg)
Sounds so good at 2:42
Loved the video my friend ! Keep up the good work
Nice work as always
How do you use the material for the cylinder head pad
Hey man love your content dude. I’m learning a lot. Quick question, what are your preferred receivers to use for your builds and why do you like them?
Don’t really have a preference for receivers bud, they’re all pretty much the same. I do prefer nylon though as it keeps the weight down.
Great work.
Where do you get the one piece cylinder from?
From memory command elite hobbies, just be careful they seem to be slightly different in quality etc. I’ve had some good and some not so good.
Did you end up buying the one piece cylinder. I’m thinking about getting one
What are your preferred springs in your DSG and other high rof builds? Iv been having issues with unequal springs buckling after short use on the piston end. I'm curious if you use equal or unequal and what's your preferred brand. Thanks
Normally just shs unequal springs in the red packets because they’re available everywhere.
Are you running a mosfet?
Do you turn precock off when it’s stored?
Sometimes I get a very slight bend after a while but nothing really concerning.
Yea I always have pre cock turned off before I finishing using the blaster. Have spring retainer with the bearing and still have had 2 springs a 1.38 and 1.28 ausgel bend badly after only 15 minutes of use
I have used the blue packet shs wasn't quite as bad but still happened faster than expected. Are the red packet better quality?
@@michaelreaby6310 yeah I’ve been told they’re the best shs ones by one of the better tech guys. Hopefully they will work for you
Ok awesome thanks for the help
Where you get the red kublai nozzle tips bro?
Rpm tech shop, can’t find any at the moment though
where do you get those purpose built spacers from?
Airsoft shops, some piston heads come with them, gel blasters Australia had them or 3D print.
@@hiroshimascreamer5884 Thanks man, love your work.
Where did i get that outter barrel on that test blaster?
The silver looking thing?
I got it from powair6, it’s meant for AS so I had to drill it out to take a larger OD barrel. Then I just sanded the black off to expose the naked alloy
Thanks 👍
Does bigrrr mosfet fit in them?
Should do, I haven’t used a bigrrr mosfet yet though.
I really hope it does as i would like to re use it as it’s still good and works great, i was told that they need a slight mod but if you ever put a bigrrr in an mk v2m i would definitely would like to know! Thank you
Will this work for airsoft?
Not this gearbox, I think there are airsoft versions around.
M170 @300fps ?? Was that a typo?
No that’s correct, can I go into more details for you?
@@hiroshimascreamer5884 if it's not too much trouble , love your builds man
@@zanemakela1057 firstly I guess what confused you? The spring rate or the fps.
Do you play airsoft or gel ball?
@@hiroshimascreamer5884 a m170 pushing 300fps and yes I play every weekend
@@hiroshimascreamer5884 gelball