Thanks for video, didn't figure out the tabs (!) but even having watched your vid, I'm still haven't figured out the trick. I've tried extreme prying w/o success. (I'll edit post when I succeed! EDIT: Trick is to pry the tabs up, pushing the body halves apart. Once loosened, everything separates.) ALSO, left tool out in small rain storm, the level indicator worked, put on charger, charged but shut off quickly indicating full charge. So I'm going to dry it out and hope I didn't fry anything. This is the HP + battery so I'll be really sad if it was ruined. NOTE: They need to make lithium/electronic batteries rain proof. I mean everyone at some point leaves a tool out that gets rained on.
Thank you! I had a 4ah that the locking clips were not working anymore, and a 1.5ah that didn't change anymore. Was able to swap the clips thanks to this!
This is what worked for me. Drilling a small hole and then unscrewing it with the torx screwdriver through the hole and the whole thing pops out. Thanks!
Thanks for the video: I missed that screw at the top. After removing it I was able to get it apart. I'm building a 6 battery bank using the 6 battery bank charger. I needed one male battery plug so I could plug the unit into the 1000 watt Ryobi inverter. It's funny, I have been using the 18V Ryobi system for about 20 years yet it was difficult for me to remember where I put the ONE battery that actually went bad . The other 15 are still working perfectly. Maybe Ryobi needs to teach Apple how to make batteries.
Any video or suggestions on cleaning the batteries? They are a bit gummed up and I wouldn't want to use anything that will damage it. Thanks for the great videos!
Can you advise a source to purchase these top covers? I had an 18v Ryobi blower melt the plastic on 2 of my batteries. Thanks for the video! Very helpful.
Thanks for video, didn't figure out the tabs (!) but even having watched your vid, I'm still haven't figured out the trick. I've tried extreme prying w/o success. (I'll edit post when I succeed! EDIT: Trick is to pry the tabs up, pushing the body halves apart. Once loosened, everything separates.)
ALSO, left tool out in small rain storm, the level indicator worked, put on charger, charged but shut off quickly indicating full charge. So I'm going to dry it out and hope I didn't fry anything. This is the HP + battery so I'll be really sad if it was ruined. NOTE: They need to make lithium/electronic batteries rain proof. I mean everyone at some point leaves a tool out that gets rained on.
Thank you! I had a 4ah that the locking clips were not working anymore, and a 1.5ah that didn't change anymore. Was able to swap the clips thanks to this!
You can also use a small drill bit and drill through the plastic tamper-resistant screw-plug-- it's maybe 2-3 mm deep, so go gently.
This is what worked for me. Drilling a small hole and then unscrewing it with the torx screwdriver through the hole and the whole thing pops out. Thanks!
It worked for me first try, i did feel the wires getting hot under 30 seconds and that’s all I needed.
Thank you for your Video!!!
Excellent video!
Thanks for the video: I missed that screw at the top. After removing it I was able to get it apart. I'm building a 6 battery bank using the 6 battery bank charger. I needed one male battery plug so I could plug the unit into the 1000 watt Ryobi inverter. It's funny, I have been using the 18V Ryobi system for about 20 years yet it was difficult for me to remember where I put the ONE battery that actually went bad . The other 15 are still working perfectly. Maybe Ryobi needs to teach Apple how to make batteries.
YES! My battery in online again! 2x15 sec. was enough.
Thanks! I got stuck at the plastic cap
Any video or suggestions on cleaning the batteries? They are a bit gummed up and I wouldn't want to use anything that will damage it. Thanks for the great videos!
Can you advise a source to purchase these top covers? I had an 18v Ryobi blower melt the plastic on 2 of my batteries. Thanks for the video! Very helpful.
Is the amount of lithium in the battery worth retrieving to sell for scrap?
I've already replaced three batteries but I know lithium is fairly rare, I'd like to try scrapping the metal.
Wow, glad you think we are all idiots not to be able to figure this out. plus zero info on how to fix a defective charger. Waste of time.
Did you actually READ the name of the video???... 😒
@@abbym272 Yes, read the title. Somebody care enough to help and you just act like a clown. READ the title????
CORRECTION, >>> YOUR