Hello Jonathan, Merry Christmas and Happy New Year to you and your family!! This is Jay from MT. I love all of your video's! I am looking forward to meeting you at Montana Jets 2025. That T-wrench in this video is like a glow plug wrench for the glow engines ie. OS 40 2 stroke. There are smaller and larger sizes, but the one you have in the video is definitely the smallest I've seen. See you on your next live 😊
Great topic as I just got back from a Milwaukee Big Red event. So... I pick up M18 Fuel brushless Drill & Impact driver combo with 2 x 5.0 amp battery and rapid charger, A M18 6 inch Fuel brushless angle grinder with paddle switch, M18 Fuel brushless jig saw, M18 Fuel brushless 1/2 inch mid torque wrench, M18 Fuel brushless Hammer drill a few 5.0 battery and one 8 amp Forge battery. Most important to a hobbyist a M12 soldering iron! Portable, uses same battery as the M12 tools, Has lights to indicate when it heats up and when it is cooled down and it can be put down anywhere without burning anything, no stand needed to support it. I also got 2 x 6.0 amp M12 battery as it gobbles up amps😁
An ad played right as you were about to announce #10. I was pointing at my screen saying "If you don't have Trusty in there, we're gonna have words". Good job.
A DeWalt 12 gallon stainless vacuum cleaner , Hemostats for hold stuff in position. A good soldering iron with silver solder a stand to hold the fittings in while soldering , small led light to see into the fuse of wings . Metric sockets 1/4" drive from 2mm-6mm with a stubby ratchet and extensions .
All great tools that I am familiar with but… that clevis tool surprised the heck out of me!! I NEED one of those. Most of my similar tools are for ball links but still cursing when I have to adjust clevis’… thanks for an awesome thing to add to my kit!
Yu pretty much everything you showed I have and a heap more. Amazing how useful modelling tools are round the house, car, garage etc.😂😮 The ole knife selection.😅
Well, you do have several vacuums sitting around. Your numerous model stands and toolboxes. On the smaller side your wire crimpers that you used to make your jumper cables. Not to mention all your model storage shelves. That all for now.
New tool I found that I wish I had years ago is Mico-Mark #88022 Gripster. Grabs small screws,bolts, nuts etc. They have a lot of cool tools for us modelers
Nr 11 ist noch ein gutes Feuerzeug , damit man die gecraschte Kiste auf dem Model flugplatz dann anzünden kann , falls Sie nicht eh von selbst anfängt zu😅 brennen 😅😅
5 more to add: 1) X-acto knives. May not always need them but they make sharp and accurate cuts. 2) Varying length Hemostats. Since they lock they can grab screws, nuts, wires, etc. 3) Array of glue. CA, epoxy, Aeropoxy, E-6000, etc 4) portable soldering iron 5) zip ties of varying length
We need to get you exposed to a nice CNC machine. They are getting more affordable and in my opinion takes our building to the next level. Email me if you want pointers.
We cover lots of real time builds on our other channel The Lighter Side Of RC AFTER DARK: www.youtube.com/@TheLighterSideOfRCAfterDark/featured
Hello Jonathan, Merry Christmas and Happy New Year to you and your family!! This is Jay from MT. I love all of your video's! I am looking forward to meeting you at Montana Jets 2025. That T-wrench in this video is like a glow plug wrench for the glow engines ie. OS 40 2 stroke. There are smaller and larger sizes, but the one you have in the video is definitely the smallest I've seen.
See you on your next live 😊
I’ve found that a good servo tester is a incredibly helpful tool to have
Great topic as I just got back from a Milwaukee Big Red event. So... I pick up M18 Fuel brushless Drill & Impact driver combo with 2 x 5.0 amp battery and rapid charger, A M18 6 inch Fuel brushless angle grinder with paddle switch, M18 Fuel brushless jig saw, M18 Fuel brushless 1/2 inch mid torque wrench, M18 Fuel brushless Hammer drill a few 5.0 battery and one 8 amp Forge battery. Most important to a hobbyist a M12 soldering iron! Portable, uses same battery as the M12 tools, Has lights to indicate when it heats up and when it is cooled down and it can be put down anywhere without burning anything, no stand needed to support it. I also got 2 x 6.0 amp M12 battery as it gobbles up amps😁
I would agree Milwaukee drill with a 2 and 5amp battery a must
WOW! you went nuts with the tools! Well done! I will check out the Soldering tool from Mil!
An ad played right as you were about to announce #10. I was pointing at my screen saying "If you don't have Trusty in there, we're gonna have words". Good job.
LOL. Thanks! Can't forget Trusty!
Nice list of tools.
Thanks 👍
A shop vac to help keep things neat and clean. Maybe a few sizes for the nooks and crannies.
😎
what is the use of the bent screwdriver?
Better question is what can the Trusty Bent Screwdriver NOT be used for!
The BVM clevis pliars have not been available for years now. I would LOVE to have a pair!~
Dreamworks has them in stock!
@@thelightersideofrc I almost pulled the trigger at $35+ until I saw their downright CRAZY shipping fees.
Yeeaaahhhh, I was so afraid don't see Trusty ! My heart finally goes down at #10 🤣🤣👍👍
😂😎
Merry Christmas! Another great year of videos, thanks 🙏🏻. 45 same as me 😊 👍🏻
😎
A DeWalt 12 gallon stainless vacuum cleaner , Hemostats for hold stuff in position. A good soldering iron with silver solder a stand to hold the fittings in while soldering , small led light to see into the fuse of wings . Metric sockets 1/4" drive from 2mm-6mm with a stubby ratchet and extensions .
You got it! All excellent tools for any RC project!
That T wrench is all over my shop, but so useful. I almost always use it on any plane build!
😎
All great tools that I am familiar with but… that clevis tool surprised the heck out of me!! I NEED one of those. Most of my similar tools are for ball links but still cursing when I have to adjust clevis’… thanks for an awesome thing to add to my kit!
No kidding! Such a cool tool! Dreamworks has them in stock!
@ Big thanks for the tip!! Just ordered a set!
Yu pretty much everything you showed I have and a heap more. Amazing how useful modelling tools are round the house, car, garage etc.😂😮 The ole knife selection.😅
😎
Yeah, I made #6. Hoping You and your Family have a very Merry Christmas.
😎
cool.
😎
Well, you do have several vacuums sitting around. Your numerous model stands and toolboxes. On the smaller side your wire crimpers that you used to make your jumper cables. Not to mention all your model storage shelves.
That all for now.
😎
Soldering iron and related accessories.
😎
Sand paper and emery boards
😎
Well, we didn’t see you at Jets over Miami this year.
Nope. Was under the weather
Need to add the tools for putting in servos in very tight spaces
🙌
Maybe not technically a tool but a good label maker that will print heat shrink tubing is an awesome item to have in the shop.
😎
Clamps
🙌
New tool I found that I wish I had years ago is Mico-Mark #88022 Gripster. Grabs small screws,bolts, nuts etc. They have a lot of cool tools for us modelers
😎
WHERE CAN I GET THE NVM CLEVIS TOOL !!!!!!!!! I WANT SOME
Dreamworks has them in stock.
@@thelightersideofrc Thanks again!
4 tools to add in no particular order, 3D printer, digital angle gauge, good quality servo wire crimper and a digital heat gun.
😎
Hobby knife.
😎
You seem to use your cordless LED light a lot
YES!
Nr 11 ist noch ein gutes Feuerzeug , damit man die gecraschte Kiste auf dem Model flugplatz dann anzünden kann , falls Sie nicht eh von selbst anfängt zu😅 brennen 😅😅
😂
I would have think “Trusty” would have been number 1 😅
LOL. No specific order!
5 more to add:
1) X-acto knives. May not always need them but they make sharp and accurate cuts.
2) Varying length Hemostats. Since they lock they can grab screws, nuts, wires, etc.
3) Array of glue. CA, epoxy, Aeropoxy, E-6000, etc
4) portable soldering iron
5) zip ties of varying length
YES!!!! Good additions!
And, if you're into helis, you just gotta get a CletusWrench
😎
Tweezers
🙌
I think the "tool" between the ears is the MOST important tool in any shop!
well said.
If MIP isn't included it is not a real rc guy. All i saw was cheap tools lol.
😂
We need to get you exposed to a nice CNC machine. They are getting more affordable and in my opinion takes our building to the next level. Email me if you want pointers.
Yea I have been checking some out! Very cool stuff available!