Been watching you for years really enjoy your videos man keep em up you're the one who started making me put holes in my PS3 years ago hello thanks bro
And what do you think it's the problem when, after changing the thermal compound underneath the RSX, it's still overheating, even when the cooler it's making full contact with the RSX? Because I opened after doing this process and the IHS was still very glued at the cooler.
I have a PS3 backwards compatible, the RSX if I don't put it under stress is around 56/59°C, using GT5 it reaches 65°C very easily, but with the FAN at 34% I can manage the temperatures very well...
Has anyone heard of the cramolin flux-off spray??? They say you can spray on the adhesive which will turn it into slime, then use some 0.23 mm 30lb test fishing line to cut through the softened adhesive in a sawing motion. No risk of damaging any traces since there is no metal involved. Any tipps?
@@Forsaken1990 Interesting, I was thinking about using a steel wire 24AWG (0.5mm) diameter. They sell it at homedepot or hobby shop. In the mean time, bought a Super Slim PS3 and It's super quiet. They should call it Super Quiet PS3 instead of Super Slim.One of these days after fixing the cooling issue I will install CFW for my old Slim PS3 and backup all my games to hard disk and experiment other cool stuff.
I don't know why but the ps3 and xbox 360 are the 2 worst built consols ever, i have never had problems with my ps2 except when my dvds are scratched, it still works perfectly, same with my childhood NES, but the ps3 always has cooling issues, it's the worst console sony has ever built
Why the RSX is almost 60°C on the XMB even after you did delid and fixed the heatspreader? Not the first time i see temperatures like that, not just on this PS3 but a lot of PS3 on youtube with delid are that high. On my CECHL04, never been delided, on the XMB the RSX is 51°C and in game never more than 55°C. I don't understand why a so big difference with my PS3 and the others on videos. I just did a repast and fan setting at 50% max in Webman (target at 70°C, fan minimum at 25% max 50%). But good job on the heatspreader! Unbelievable to see it bent like that! Sorry for my english, not my native language too haha
Yeah, it conforms always the room temperature to. If the Delid and the rest was good done, the temps will be amazing. On 50% fan speed my delided ps3 would run on about 38C😅 🤗✌️
You press start and select at the same time. If you want it to keep showing every few seconds, hold the buttons again when the temperature pops up and you’ll hear your PS3 beep. If you want it to stop showing every few seconds then when the temps are on screen press the two buttons together once again but this time your PS3 will beep twice
i have a ps3 after 2 minutes the fan runs really high and shuts down i applied new thermal paste heat sinks are touching properly you think underneath heat spreaders thermal is dried up or could be another issue thanks.
good for the disassembly but I would like to know what silicone is used for the processor and see an assembly, since it does not have videos of it and there are several disassembly videos
Hi, I failed in CPU delidding on my cech 2004b and wanted to ask how hard it is to remarry CELL? I can't find much information about that anywhere, unfortunately.
Hi You can't find informations because it's not possible. Let's say it would be possible but it is not worth all the work. The Cell is the only one witch is really unique. So IF you want to remove the CELL you need also to have the syscon chip witch was with the cell. You can't mix it up. The rest you can replace all the time, but the CPU is the most important for the board to work.
you could also use thermal compund pads. often used in laptops or all ps2 moddels. if any place on the heatspreader is higher than the other, it will fill it out.
why do cool it my laptop verry good? there is a mobile i7-7500 inside an a 980m graficscard. it works fine never reaches mor than 70°C :D And I guess it would cool way better than no thermal paste like in this ps3 :D Cooling Pads works fine to me :)
I replaced thermal paste and ps3 would not boot up just beeped so I did the cpu trick of removing plate a d still the same,I've tested every componant and all see fine but still basically bricked.
hey NSC!! glaubst du . ist bei der ps4pro... der lüfter zu langsam eingestellt?? gibts von dir schon videos über die ps4pro?? (hab mir vor 2 wochen eine pro gekauft sie aber noch nicht angeschlossen) und ich hab die standard ps4 cuh-1116 nach deinen künsten umgebaut und die WLP und WLpads gewechselt und sie läuft besser als am ersten tag!! vielen dank nochmal für deine videos...bist ein irrer (positiv gemeint)
Yeah, ich bin Irre xD Ja, bei allen PS ist der Lüfter zu langsam, von Sony so gewollt, damit die schneller Kaputt gehen... Sony aber argumentiert mit der Ausrede: Unsere Kunden wollen es so, sonst sei die PS zu laut und würde bei Videos anscheinen sehr stören Hahahaha Das Geile ist dann aber, das dass Laufwerk sogar lauter ist wenn es sich dreht, als der Kühler selbst hahaha
Hello! I bought a ps3 slim cech 2504a. I opened it, cleaned, changed the thermal paste and I got a very high temperature on RSX, about 80 degrees, CPU has 69-70. I delided the RSX, changed the thermal paste between lid and RSX die and got 78 degerees on RSX after this. After that, I watched this video, checked the surfaces, and lid of RSX was be not flat, I cleaned up with sandpaper and got flat lid. I assembled all back and got the same temperatures. What else can i check? Please help!
Your need to get the RSX IHS back to the cooler with a lot pressure. Press the IHS really down to the cooler, the thermal paste needs to spread so much as possible.
Hallo ich hatte eine kleine frage ? Ich habe ein Problem mit meine ps3 Slim sie macht leider kein bild mehr und bekommt ein frezze was kann ich gegen tun oder gegen machen würde mich freuen wenn sie mir helfen können
Hey nsc, I was removing the ihs from the rsx gpu and I damaged one of the little things I don't know what you call it but on the gpu itself, not the actual die or the surrounding four things. Does this mean the PS3 will not work anymore?
Hi i have a great question for you i have a ps3 that has no video and the controller wont sync the console does boot but no video you think problem with rsx hdmi port is fine appreciate any suggestion you would have how to fix this
Hey NSC. I recently delided my PS3 Slim 20xx and the RSX is overheating like hell! On syscon after 1 hour it hits 77c and the CPU 69. I tried to see if the heatsink has gaps but its completely fine.. the rsx die also leaves a full print on the IHS. The ihs is also stuck on the heatsink as you suggested. Any more ideas??
@@Bridgetfidget18 hi! My solution was to do the case mod (drill holes on the top case) and it really improved the temps by a 5-6c! Now i play with 28% fan speed and maintain about 72c on RSX on GTA IV while swimming.
Ich habe ab 2010 eine ps3 Slim bekommen sobald ich es anschalte es schaltet sich selbst aus rot blinkendes Licht aus. Kann die Wärmeleitpaste schlecht auf und unter den Chips das verursachen? Ich weiß, dass das Netzteil gut ist, weil ich immer noch den Lüfter testen kann und das Gerät schaltet sich ein. I got a ps3 slim from 2010 as soon as I turn it on it turns its self back off blinking red light.Can the thermal paste bad on and under the chips cause this? I know the power supply is good because i can still the fan test plus the unit does power on.
My idle temperature for ps3 CECH-2004A is CPU: 50c RSX: 52c max with fan speed 37% but while gaming RSX goes 67c with fan speed 57% but CPU stays cold at 54c max. The heatsink is almost perfect, I'm also using MX-4 (CPU and RSX are delided and also thermal paste is changed). Am I missing something or these temperatures are ok for this model or any model in general?
for a slim its pretty high my chech 2504b runs a t 52 degree cpu and 50 rsx and in game it dosent go higher than 65 for both on heavy games my fan speed is at 37 percent and i run with no name shit thermal paste aand i never repaste the ihs
@@lowliar8489 tnx, but I think 2504b uses 40nm GPU which runs a bit cooler than mine 2004a with 65nm. I manage to get 66c with fan speed around 39% while gaming with case mode witch is pretty good for this I guess but I'm not sure if this can be a bit better.
Lol my PS3 slim cech2503b gets to like 75-80 on the RSX in pretty much every game. The Cell (CPU) stays in the 60s for most games but for some games it does reach the 70s
@@NSC-Modz Then you would not use such words. I dont mean it in a bad way. Wir sollten uns doch immer alle gegenseitig helfen. Und wenn Kinder im Hintergrund sind, solche Worte vermeiden.
I bin froh über meine J04er FAT G1RL ::) 80gb oke 40 weil das es einzige is was in den 10 jahren kaputt gangen ist ;) sunnstchillt die ihr leif >) Ultra lieber Ultra Es iiist noch nicht so weit ^_^ Najo da wars wohl schon 7 oder? weiß ich auch nich mehr wenn des sandmänchen gekommen is yD Is geil dass du da Old Gen bist und ds dein kindern net vorenthältst, kennt heut keiner mehr >P Hab ich früher auch immer gschaut ;)
PS3 had overheating problems because the IHS, the PS4 has no more IHS :) But i recommend to buy the normal PS4 or the PS4 Pro, the slim edition overheated faster and the slim has often problems with the disk drive... if you can give it back, then go for the Pro
Great videos! Thank you so much! By the way, can you help me please? I have a ps3 CECHA that turned off after 15 secs, with a pop up saiyng overheating. I cleaned the entire ps3, replaced thermal pads and thermal paste. Now the ps3 get the cooler fan to the full max speed when I turn it on, with a YLOD and red blinking, like in this video th-cam.com/video/4vdxtZzpTeE/w-d-xo.html
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
Been watching you for years really enjoy your videos man keep em up you're the one who started making me put holes in my PS3 years ago hello thanks bro
You always welcome ;)
im always learning somthing new from your channel, thankyou
Nice, you always welcome
Ooops on min. 25:05 xD Startup means the Time how Long the PS3 is On ^^ Soooory ^^
LOL
Verkaufst du auch cids?
Do you still repair ps3
@@blkmhere yes
@UltraNSC You always, always make the best shit! Well done!
Thank you very very much for your great comment :)
You post things that nobody else knows. No one ever talks about this. You are great!
That's true, and thank you very much :)
And what do you think it's the problem when, after changing the thermal compound underneath the RSX, it's still overheating, even when the cooler it's making full contact with the RSX? Because I opened after doing this process and the IHS was still very glued at the cooler.
Eraser mod maybe
I have a PS3 backwards compatible, the RSX if I don't put it under stress is around 56/59°C, using GT5 it reaches 65°C very easily, but with the FAN at 34% I can manage the temperatures very well...
I wish there was a special thermal conductor to inject using syringe/needle between the CPU and heatsink plates without having to separate them.
This would be very impossible...
Has anyone heard of the cramolin flux-off spray???
They say you can spray on the adhesive which will turn it into slime, then use some 0.23 mm 30lb test fishing line to cut through the softened adhesive in a sawing motion. No risk of damaging any traces since there is no metal involved. Any tipps?
@@Forsaken1990 Interesting, I was thinking about using a steel wire 24AWG (0.5mm) diameter. They sell it at homedepot or hobby shop. In the mean time, bought a Super Slim PS3 and It's super quiet. They should call it Super Quiet PS3 instead of Super Slim.One of these days after fixing the cooling issue I will install CFW for my old Slim PS3 and backup all my games to hard disk and experiment other cool stuff.
I don't know why but the ps3 and xbox 360 are the 2 worst built consols ever, i have never had problems with my ps2 except when my dvds are scratched, it still works perfectly, same with my childhood NES, but the ps3 always has cooling issues, it's the worst console sony has ever built
That's right, best cooling is always Nintendo... working and working without big modifications
Why the RSX is almost 60°C on the XMB even after you did delid and fixed the heatspreader? Not the first time i see temperatures like that, not just on this PS3 but a lot of PS3 on youtube with delid are that high. On my CECHL04, never been delided, on the XMB the RSX is 51°C and in game never more than 55°C. I don't understand why a so big difference with my PS3 and the others on videos. I just did a repast and fan setting at 50% max in Webman (target at 70°C, fan minimum at 25% max 50%). But good job on the heatspreader! Unbelievable to see it bent like that! Sorry for my english, not my native language too haha
Yeah, it conforms always the room temperature to. If the Delid and the rest was good done, the temps will be amazing. On 50% fan speed my delided ps3 would run on about 38C😅 🤗✌️
NSC in the Place to be
and verliert nie :D
Please make tutorial how to fix ps3 blu ray drive red laser problem
I did it already a long time ago, please take a look on my channel...
Danke nochmal für den Hinweis auf das neue video. Wusste ich noch nicht., das is ja unglaublich :o
Gerne doch :)
Thank you I have learned a lot from your channel. How do you get the temperature to display?
You press start and select at the same time. If you want it to keep showing every few seconds, hold the buttons again when the temperature pops up and you’ll hear your PS3 beep. If you want it to stop showing every few seconds then when the temps are on screen press the two buttons together once again but this time your PS3 will beep twice
i have a ps3 after 2 minutes the fan runs really high and shuts down i applied new thermal paste heat sinks are touching properly you think underneath heat spreaders thermal is dried up or could be another issue thanks.
Yeah, you will need to remove the IHS
@@NSC-Modz i guess both right
i put my ps3 fan on 40% all the time now the max temp i see 56% after two hours playing
do u think is it good ?
good for the disassembly but I would like to know what silicone is used for the processor and see an assembly, since it does not have videos of it and there are several disassembly videos
Spam on my channel?
Hi, I failed in CPU delidding on my cech 2004b and wanted to ask how hard it is to remarry CELL? I can't find much information about that anywhere, unfortunately.
Hi You can't find informations because it's not possible. Let's say it would be possible but it is not worth all the work. The Cell is the only one witch is really unique. So IF you want to remove the CELL you need also to have the syscon chip witch was with the cell. You can't mix it up. The rest you can replace all the time, but the CPU is the most important for the board to work.
@@NSC-ModzThank you for the answer. so, replacing the CELL and SYSCON would work? What about remarrying SYSCON to accept another CELL?
@@arnon85 forget it, you can buy a good ps3 for about 40 bucks 😆
@@NSC-Modz yeah true, I honestly just felt like messing around with that broken ps3 lol. Thanks for the answer
@@arnon85 you welcome ;)
sir I have a ps3 ylod problem. sir if I change my ps3's motherboard than the problem will solve or not.
Thanks man I love your videos. IMO 60C max is overkill. I usually try 75C.
75 is ok the ps3 can get hotter when playing anyways. Mine goes to 70 or a little more
@@Alexander_l322 who is say the 70° is ok for ps3 slim. I don't find official data about temperature at cpu and rsx.
Have you got that problem with fat model heatsinks?
Hi UltraNSC, Have you ever seen a warped CPU die on the 60gb backwards compatible model ?
you could also use thermal compund pads. often used in laptops or all ps2 moddels. if any place on the heatspreader is higher than the other, it will fill it out.
No, because it would not transfer the heat so good
why do cool it my laptop verry good? there is a mobile i7-7500 inside an a 980m graficscard. it works fine never reaches mor than 70°C :D And I guess it would cool way better than no thermal paste like in this ps3 :D
Cooling Pads works fine to me :)
This PS3 has thermal paste. ..
pads dont work bro, still over heats
ic graphite thermal pad is great
I replaced thermal paste and ps3 would not boot up just beeped so I did the cpu trick of removing plate a d still the same,I've tested every componant and all see fine but still basically bricked.
hey NSC!!
glaubst du . ist bei der ps4pro...
der lüfter zu langsam eingestellt??
gibts von dir schon videos über die ps4pro??
(hab mir vor 2 wochen eine pro gekauft sie aber noch nicht angeschlossen)
und
ich hab die standard ps4 cuh-1116 nach deinen künsten umgebaut und die WLP und WLpads gewechselt
und sie läuft besser als am ersten tag!!
vielen dank nochmal für deine videos...bist ein irrer
(positiv gemeint)
Yeah, ich bin Irre xD Ja, bei allen PS ist der Lüfter zu langsam, von Sony so gewollt, damit die schneller Kaputt gehen... Sony aber argumentiert mit der Ausrede: Unsere Kunden wollen es so, sonst sei die PS zu laut und würde bei Videos anscheinen sehr stören Hahahaha Das Geile ist dann aber, das dass Laufwerk sogar lauter ist wenn es sich dreht, als der Kühler selbst hahaha
aber ein loch übern lüfter hilft der pro schon die temperatur zu senken...oder???
aber natürlich, 5-7C° weniger auf jeden fall
^.^
Hello! I bought a ps3 slim cech 2504a. I opened it, cleaned, changed the thermal paste and I got a very high temperature on RSX, about 80 degrees, CPU has 69-70. I delided the RSX, changed the thermal paste between lid and RSX die and got 78 degerees on RSX after this. After that, I watched this video, checked the surfaces, and lid of RSX was be not flat, I cleaned up with sandpaper and got flat lid. I assembled all back and got the same temperatures. What else can i check? Please help!
Your need to get the RSX IHS back to the cooler with a lot pressure. Press the IHS really down to the cooler, the thermal paste needs to spread so much as possible.
@@NSC-Modz the pressure is good, the thermal paste is well spreaded, the temperature of RSX are still high.
RSX radiator is also hot, hotter than the CELL radiator
This is a Heatshield [IHS] not Radiator :)
Than it's a bad thermal paste or you do something wrong.
So you need to use sand paper to scrub the heatsink
No, it's not a must, only if you keep having problems.
@@NSC-Modz i already apply thermal paste in gpu and cpu and relid them but its still overheating and shutdown by itself please help
why use the heat spreader? why not just put compound on the chips and clamp the heat sync onto to chips
Because without IHS you will have 3mm space between the cooler and it will have no contact to the chip my friend
@@NSC-Modz yeah but sony did they do it to make it overheat maby custom heatsyncs?
Hallo ich hatte eine kleine frage ?
Ich habe ein Problem mit meine ps3 Slim sie macht leider kein bild mehr und bekommt ein frezze was kann ich gegen tun oder gegen machen würde mich freuen wenn sie mir helfen können
Mine is not like this i changes the thermal paste but still overheats and its clean no thermal past underneath either
You will need to remove the IHS, search on TH-cam: PS3 IHS removal NSC
@@NSC-ModzDoes that mean delidding?
Hey nsc, I was removing the ihs from the rsx gpu and I damaged one of the little things I don't know what you call it but on the gpu itself, not the actual die or the surrounding four things. Does this mean the PS3 will not work anymore?
SoldierSparky once u damage it means it’s done for good.
Hi i have a great question for you i have a ps3 that has no video and the controller wont sync the console does boot but no video you think problem with rsx hdmi port is fine appreciate any suggestion you would have how to fix this
This is a kinda YLOD...
NSC Modz how to fix it do a reflow
Hey NSC. I recently delided my PS3 Slim 20xx and the RSX is overheating like hell!
On syscon after 1 hour it hits 77c and the CPU 69.
I tried to see if the heatsink has gaps but its completely fine.. the rsx die also leaves a full print on the IHS. The ihs is also stuck on the heatsink as you suggested. Any more ideas??
Maybe try using 40% fan speed, syscon aka Sonys fan curve tends to cook ur system, 35-40% fan speed, see if that works
@@Bridgetfidget18 hi! My solution was to do the case mod (drill holes on the top case) and it really improved the temps by a 5-6c! Now i play with 28% fan speed and maintain about 72c on RSX on GTA IV while swimming.
@@dimitrisantoniou8502 I still wonder what’s the ideal temps for a slim
@@Bridgetfidget18 for me personally, anything that keeps the system near 70c on low fan speed since launch slim models tent to cook!
Hey my jailbroken ps3 keeps over heating and turning off would u be able to fix it ?
Sure, but i am from Germany
It's ok for me, you are all welcome
Ich habe ab 2010 eine ps3 Slim bekommen sobald ich es anschalte es schaltet sich selbst aus rot blinkendes Licht aus. Kann die Wärmeleitpaste schlecht auf und unter den Chips das verursachen?
Ich weiß, dass das Netzteil gut ist, weil ich immer noch den Lüfter testen kann und das Gerät schaltet sich ein.
I got a ps3 slim from 2010 as soon as I turn it on it turns its self back off blinking red light.Can the thermal paste bad on and under the chips cause this?
I know the power supply is good because i can still the fan test plus the unit does power on.
Ich denke mal das die überhitzt ist
Ciao, la mia ps3 ha una temperatura di 68/66 grafi ma la ventola è solo al 28% è normale? vedo che la tua addirittura arriva al 35%
Si, tuto bene 😉
I wanna sign to NSC Records
Hehe you always welcome ✌
Yo bro , im on rebug too , how can i get that info massage about: CPU - RSX - FAN - STARTUP ect. ? ?
i have the next Video ready to, it has a lot Infos about Rebug & co. :) So stay Tuned on my channel ^^
if you have webman instaled just press simultinusly on dualshock [start and select].if not download and install webman related to your rebug version.
Can you fix my PS3? if so do you have web orders I can't seem to find your website...
Great job, thanks for your video.
My idle temperature for ps3 CECH-2004A is CPU: 50c RSX: 52c max with fan speed 37% but while gaming RSX goes 67c with fan speed 57% but CPU stays cold at 54c max. The heatsink is almost perfect, I'm also using MX-4 (CPU and RSX are delided and also thermal paste is changed).
Am I missing something or these temperatures are ok for this model or any model in general?
for a slim its pretty high my chech 2504b runs a t 52 degree cpu and 50 rsx and in game it dosent go higher than 65 for both on heavy games my fan speed is at 37 percent and i run with no name shit thermal paste aand i never repaste the ihs
@@lowliar8489 tnx, but I think 2504b uses 40nm GPU which runs a bit cooler than mine 2004a with 65nm. I manage to get 66c with fan speed around 39% while gaming with case mode witch is pretty good for this I guess but I'm not sure if this can be a bit better.
Hey bro nice video
What is best thremal compound for ps3 ?
The MX4 ist just perfect
I have this same issue but my IHS is bent in the middle :(
My temps are 62 on the cpu and 64 on the rsx in the xmb menu. It’s very loud in games
What are good temps for the slim?
All under 72°C is ok
@@NSC-Modz whilst gaming ?
Yeah, Max 72 °C I would not let it run hotter than that...
@@NSC-Modz lmao mine goes up to 72°C on XMB menu
@@vitvickyvid Ouch xD
hey bro i need a help with a ps3 haw to contact u can u help me ???
UltraNSC@Live.de or you can find my Number for Whatsapp on my TH-cam Channel
i have send u a sms bro on whatsapp can u see it please ??
Lol my PS3 slim cech2503b gets to like 75-80 on the RSX in pretty much every game. The Cell (CPU) stays in the 60s for most games but for some games it does reach the 70s
Don't use words like that in front of your daughter!
All cool my friend you don't need to tell me that!
@@NSC-Modz Then you would not use such words. I dont mean it in a bad way.
Wir sollten uns doch immer alle gegenseitig helfen. Und wenn Kinder im Hintergrund sind, solche Worte vermeiden.
Die 3004 hat das schonwieder nicht habe neulich eine gemacht.
Habe eine 2500 mit CFW aber mache die IHS nicht auf.
ZaZzCode
C
I bin froh über meine J04er FAT G1RL ::) 80gb oke 40 weil das es einzige is was in den 10 jahren kaputt gangen ist ;) sunnstchillt die ihr leif >)
Ultra lieber Ultra Es iiist noch nicht so weit ^_^ Najo da wars wohl schon 7 oder? weiß ich auch nich mehr wenn des sandmänchen gekommen is yD
Is geil dass du da Old Gen bist und ds dein kindern net vorenthältst, kennt heut keiner mehr >P
Hab ich früher auch immer gschaut ;)
I wish you were my uncle.
Wold be cool ^^
you saved my life 😮
This guy sounds like a young Niki lauda
xD
NICE!
Boas Nuno a minha ps3 slim modelo cech2004 a pasta termica esta aparecer queimada se tivesse o teu email mostrava te
Não tens Whatsapp?
Não mensanger ou discord
@@miguelangeloguerreirocrist294 ok :) olha mais em baixo...
👇
UltraNSC@Live.de :)
I had some troubles with PS3 fat in past I hope Sony learn there lesson on PS4 i just got PS4 slim few days go I haven't any troubles yet
PS3 had overheating problems because the IHS, the PS4 has no more IHS :) But i recommend to buy the normal PS4 or the PS4 Pro, the slim edition overheated faster and the slim has often problems with the disk drive... if you can give it back, then go for the Pro
Cooler fucked? Np! Just buy another one!
25:10 noch 30 minuten bis zur selbstzerstörung 😉😂
xD
جيد جدآ احسنت
شكرآ للمعلومات
Bitte was ?
Thanks for the info! I have one that will not play PS3 games 80010017 code. have you seen that? It will play blue ray and all ps 1/2 games.
Great videos! Thank you so much! By the way, can you help me please? I have a ps3 CECHA that turned off after 15 secs, with a pop up saiyng overheating. I cleaned the entire ps3, replaced thermal pads and thermal paste. Now the ps3 get the cooler fan to the full max speed when I turn it on, with a YLOD and red blinking, like in this video th-cam.com/video/4vdxtZzpTeE/w-d-xo.html
THX, check this: m.th-cam.com/video/4gUUOQoj0Rg/w-d-xo.html
Hi
What an accent-"alzo"
you welcome
Lol t°C 60)))
Very good ;)
OMG dude...stop repeating yourself.
Shut up fool he’s explaining and showing it well
Hi