The New Ryobi HP Angle Grinder Just Got Real (For Home Owners) 2021
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- Ryobi Tools just announced their all new HP line up, and we got our hands on the New Ryobi HP 4-1/2" Angle Grinder. There have been some big upgrades to this grinder, but it still has a few issues.
Buy Here
Ryobi Not Yet Available
Turboplane Wood Carving Disk amzn.to/3b2rCk7
18V ONE+ HP BRUSHLESS 4-1/2" ANGLE GRINDER/CUT-OFF TOOL
MODEL: #PBLAG01B
Write a review. This action will open a modal dialog.
Brushless Motor Provides up to 30% Faster Cutting
Tool-Free Wheel and Guard Adjustment for Quick and Easy Changes
Over 175 ONE+ Tools - All Work With Any RYOBI ONE+ 18V Battery
RPM 9,200
Wheel Size 4-1/2"
Arbor Size 5/8"
Warranty 3 Years
MODEL: #PBLAG01B
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
![ALL NEW - 18-Volt RYOBI One+ HP 4-1/2" Angle Grinder Review [$119]](http://i.ytimg.com/vi/abnQIIgarsk/mqdefault.jpg)
You covered all of the bases, including safety. Outstanding.
I am a woodcarver and I just purchased this tool to use with the arbortech and for sanding> It fits the bill perfectly!
Appreciate the review and your assessment of the tool's performance or the lack of it. Thanks.
Try using a better cut off disc. The one it comes with is junk. Thanks Der Guy.
Thanks Tool Review for your information and demonstration and video 📹 👍 I appreciate you
I’ve got to say, the hp tools are more aesthetically pleasing. The light green never got me going. I was drawn to the red. Didn’t look too bad, its probably too close in price to the milwaukee fuel in the UK right now, reckon itll come down pretty rapid. Thanks for the content!
Yeah, ill buy it....
Ryobi works for me thus far. No problems.
Disclosure 👉"(for home owners) "🤣. Love your videos!
Haha, thanks Shinigami!!
Great review Clint, thanks!!!
Thanks Ted!!!!!
Used my old brushed one, works fine for my limited use. This one would prob be better.
Smeeesh button done. I just felt that the guard should still be on the grinder while using the carving disk. I saw the carving disk way too close to your red hoody, it can be very dangerous.
I see another grinder in my future! Real nice like!
Hahaha, thanks Larry👊
great information and demo, thanks
Thanks clmis!
Looks to be a lot better than the early version that I own and would class as "hobby" maybe. But I am biased as use real angle grinders daily
Ty for the vid. I got this for my light duty stuff and use a Corded Metabo for the heavier stuff. Not the best of the best (😁One better will always come out the next year=) but good enough to get what I need done=)
Good job on the video I like the grinder
Thanks brother
Great video! I have a few Ryobi tools that work really well: sanders, nailer, staple, and even a grass trimmer. However, if I need a tool with power and precision I go with Bosch.
I use it to cut tile for angles in valleys
Yes Ryobi angle grinder is nice know it’s not like 1. Makita 2. Milwaukee 3. Dewalt but it’s absolutely a little better performance than rigid
Check the battery terminals on the hp, mine would shutdown with a 4 amp battery cutting through 8 mm bolt. swapped for a 5 amp hp and it worked out of sight.
Great video @ToolReviewZone
Thanks Antonio!
I always have 2 grinders going. For cutting I use my m18 fuel. But I still have a corded one I use for wire wheel cleaning welds and removing paint. I'm thinking of getting this rioby to replace the corded one. I think the rioby would fit the bill and save me $100.
Probably be ok for wire wheels.
They had the same handle mounts on the old version.
Some of that sweet sweet grinding 🤣🤣🤣🤣
Just get a better grinding disk... that's why the wood carving worked well
Do an old and new model review comparison.
Thanks for the review! How well would you say this grinder works when sharpening lawnmower blades and chainsaw chains?
Get a pFerd 2 in 1 for the chainsaw chains. The knockoffs for a lot less also work great.
Ryobi releases another grinder, like I need an excuse to buy another grinder. 👍
Lol
The only cure for that is not to watch new tools and their new improved performance.
I'm union and ryobi is all I use
Great video! Was this model the brushless version?
Every ryobi hp is brushless
DIY👍🏻
Did it come with a tool to change disc? Got this today, but did not get that tool...
Can you try that again now that you have HP batteries?
Does this grinder accept type 1 blades/discs? According to the manual, My Ryobi P4221 should only be used with type 27. Try finding a type 27 turbo diamond blade!! Still looking. Makes this unit of less use.
I have the first generation. It's ok to cut seals off semi trailers, that's about it.
Hi, can guard fit to Milwaukee 2780? Thanks
This grinder appears it will fit my needs. Those being for around the house sharpening gardening tools such as shovels, shears, hoe, mattock, cutting rebar, and the like. Though a file is less expensive, using one does become old.
When you were cutting the 1/4”, would a better grade cutoff blade perform faster than the one included in the kit? If yes, what brand would you recommend?
Yeah absolutely. Grab a Diablo, they are awesome 👌
@@ToolReviewZone Thank you for your prompt courteous reply. Yes, I will look at Diablo, I use their blades in my recip-saw.
How about that Milwaukee Shirt! lol
Different cutting disc give different results
Still like my dewalt cordless grinder I’ve been on a job site and I’ve seen a Ryobi corded tool peeter out and the granite guy had to use my dewalt, granite guy needs a better tool
200 cuts is with 9.0 battery
Where does the wrench tool store? The older brushless models stores the wrench tool in the removable handle.
I didn't see anything, but ill take a second look tomorrow 👊👊
Ryobi grade D
All I wanted to know is how to put the blade on
What thickness was the metal cutting blade? When I had to cut a steel lintel with my Milwaukee grinder, the batteries were used up quickly. I ended up using the Dremel Ultra Saw with its metal cutting blade, and it cut faster!!
I think it was about 1/8". Drained the battery pretty quickly like you said
@@ToolReviewZone Same here. I used a 1/8 inch blade on the Milwaukee. The 1/16 inch blade on the Dremel was much faster.
Yeah, that was a bummer for sure. Was hoping it would have done better Lisa😥
👍
Which wood carving disc were you using? I tried the chain saw disc and didn't like it at all. Your disc seems different.
It's the Arbortech. Much better
I have last years brushless model it has the onboard wrench storage in the handle. This isn’t showing it, or did I miss it
This grinder has a little latch on the nut so you don’t need a wrench, however it still comes with one
Not sure why there is a cover for the shroud
To bulky bro👊
Why they decided to remove the handle tool holder is sad. Not worth the money in Canada at $236.
I know im a lil late to this party but i usually toss the junk that comes with Ryobi tools and buy better blades/bits and stuff because their tools are pretty good but the blades and bits are super cheap
Better late than never Bill. Thanks for the feedback 👊
I agree I about sold my hp multitool cause I thought it was too under powered. Threw a dremel blade on it world of difference.
So it looks like a tool less blade change, but it comes with a tool to do it???
Its tough to loosen it , but easy to hand tighten
REAL AS A 3 dollar 💵 bill !!!!!
😆
@@ToolReviewZone love your Chanel bro keep up the good work!!!!!
Thanks brother. Glad you are part of it my friend 👊👊👊
So Nice 💘💘💘💘💘💘
Get the Brushless, the cheap brushed model is very weak.
Not gonna lie. Had to remove a couple of comments. They were spam. 👊 I think this tool could cut it 🤪🤣Lol
Thanks brother. These spam bots are so freaking annoying. And nice pun hahaha 🤣🤣
I agree its Ehhhhhh @ToolReviewZone
Haha👊
They had a poor design to have the battery going this way so you can't lay the grinding disc flat. The battery should have gone in the other way and do not get in the way
How does it stack up against the older model
Better, just still a entry level home owner/DIY'er brand offering. HP line adds a little better self power regulation, some self protection feature to make it a bit more reliable and harder to brick, able to peak performance a little longer but that's about it... Though, the regular HP line at least can use the HP+ batteries, the compact versions they released earlier could not benefit from those...
@@ZeoCyberG do you have both I have most of the regular brushless stuff but didn't get the grinder I don't like the prices of this stuff for a little more I could buy milwaukee just wondering if it's worth the extra money or if I should keep looking for a good deal on the older stuff
@@craigchiddo2794 The HP tools are basically their premium line like the Fuel is for Milwaukee. Bare tool prices do get close to the regular Milwaukee's but batteries and deals will make the Milwaukee cost more in total but Milwaukee is the pro tool brand. So can be worth it but get the Fuel if you want a significant difference, even the 12v is pretty good then and better than any other 12v brand...
The volume is a little low, try moving the mic a bit higher, the sensitivity might not be high enough.
Smeeesh that like button. 👀👉🏼 👍🏽
Lol, still trying to figure this out brother, but really appreciate the feedback 👊👊👊👊👊
👌🏽👍🏽💪🏽
Was disappointed whit cutting metal
😂 6:00 pain in the butt
No ryobi for me
🤣
150 dollar wood carving blade lol
to be honest if u were cutting plate steel like that all the time you would just buy a plasma cutter
Dude clamp down your work piece!
No