CHEVY CRUZE SERVICE BRAKE ASSIST FIXED FAST & EASY! 16-18 CHEVY CRUZE NO BRAKES FIXED! VACUUM PUMP

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ก.ย. 2024

ความคิดเห็น • 76

  • @mariaygalvan
    @mariaygalvan 2 ปีที่แล้ว +5

    Thank you for the video! I was able to replace the vacuum pump myself and save myself hundreds of dollars

  • @charleshollenbach4730
    @charleshollenbach4730 ปีที่แล้ว +3

    Did u replace the rubber O seal when you changed the pump?

  • @souledouttojesus6131
    @souledouttojesus6131 2 ปีที่แล้ว +4

    I wish you would show how you got the hose off. Trying my best to figure this out but I'm not seeing how to get it off

    • @googlesucks3623
      @googlesucks3623 ปีที่แล้ว

      Same problem. It's A Lot of talking but not a lot of showing how to.

    • @horacecomegna335
      @horacecomegna335 4 หลายเดือนก่อน

      It’s a special spring compression tool that comes in a kit.

  • @JoeRSweeney
    @JoeRSweeney 3 ปีที่แล้ว +5

    Do you just pull the vacuum line to remove it or is there a trick to it?

    • @jskoonts
      @jskoonts 3 ปีที่แล้ว +4

      There's a black tab at the base...just push it in and wiggle the line up

  • @anitraturner5748
    @anitraturner5748 3 ปีที่แล้ว +5

    Heyyy do u ever get the message of Engine power reduced due to the vacuum pump being bad??? And where did u get the part? I noticed u referred to it as a vacuum pump but when I went to look at it they called it a brake booster can you tell me anything about that

    • @angunotv
      @angunotv 2 ปีที่แล้ว

      hey same here

    • @9nottie9
      @9nottie9 ปีที่แล้ว

      I recently fixed this problem in my 2017 Chevy Cruze by changing my gad pedal.

  • @geraldstewart2556
    @geraldstewart2556 3 ปีที่แล้ว +3

    Thanks did this job today...the Cruze sucks!

    • @HidalgoMotorsCo
      @HidalgoMotorsCo  3 ปีที่แล้ว

      No problem. Glad you were able to tackle the problem

    • @matthewherrera3243
      @matthewherrera3243 6 หลายเดือนก่อน

      Good, glad you could get the vacuum to suck

  • @cherubinkas77
    @cherubinkas77 7 หลายเดือนก่อน

    Thank you so much for the video bro… I was able to replace my 2018 equinox… thanks again

  • @P-Dawg-01
    @P-Dawg-01 2 ปีที่แล้ว +3

    Hey brother! Great video! I, however, am having the problem where the brake pedal goes to the floor INTERMITTENTLY and it won't stop...typically at a low speed like you are inching out into an intersection before you take off....Any suggestions or ideas?

    • @arvindtharun9422
      @arvindtharun9422 ปีที่แล้ว

      Have you got any idea??.....is your problem solved??

    • @deadeverywhere
      @deadeverywhere ปีที่แล้ว

      @@arvindtharun9422 same here 😢

    • @NoahFlippo-fs6in
      @NoahFlippo-fs6in 11 หลายเดือนก่อน

      @pgrembowski did you find a solution?

    • @BamhurgerSlam
      @BamhurgerSlam 10 หลายเดือนก่อน

      ​@@arvindtharun9422😊😅😊

    • @horacecomegna335
      @horacecomegna335 4 หลายเดือนก่อน +1

      You have a defective master cylinder.

  • @ChrisTheCarnaGe
    @ChrisTheCarnaGe ปีที่แล้ว +2

    How do you remove vaccume line?

    • @HidalgoMotorsCo
      @HidalgoMotorsCo  ปีที่แล้ว

      sorry if we failed to provide that information here, we will make another video showing you how to remove the vacuum lines. thanks for watching.

  • @shaneladue4236
    @shaneladue4236 3 ปีที่แล้ว +2

    How did you remove the vacumm hose?

  • @kayla7562
    @kayla7562 2 ปีที่แล้ว +3

    This is happening to my 2017 Cruize (rock hard brake pedal) but also my car won’t accelerate and stalls out at every stop sign. It’s also popping up saying “oil pressure low-stop engine” & another notification popping up is “service monitoring system” and a “service stabilitrak” on top of my “service brake assist” I only have 60k miles on this car.

    • @rgrnn355
      @rgrnn355 2 ปีที่แล้ว +1

      Yo kayla.so disconnect your battery and change your gas pedal. It fixed my service stabilitrak and engine power reduced codes.

    • @juliusgonwild2478
      @juliusgonwild2478 2 ปีที่แล้ว

      Did you fix problems?

    • @klc4448
      @klc4448 2 ปีที่แล้ว +2

      Mine started like months ago. They have control over the system. When I called Onstar & told them about the recall & it somehow it didn't go to AutoStop after. I have a 2018 Cruze with just 55,000 so many codes for 1yr on & off. Feel bad for the people who are paying $18,000 for this car. Nice car but many problems after 1yr.

  • @jskoonts
    @jskoonts 3 ปีที่แล้ว +4

    What is the problem if you have suction and the "service brake assist" still comes on??

  • @flatearthrealm7846
    @flatearthrealm7846 ปีที่แล้ว

    I was wondering can I put crc intake cleaner thru that vacuum line to the air pump and will it hit all the valves?

  • @raymondmccoy5904
    @raymondmccoy5904 19 วันที่ผ่านมา

    Thank you

  • @jeffro2488
    @jeffro2488 3 ปีที่แล้ว +3

    Where did you get that pump? Can't find it anywhere. Thanks great video

    • @reginaldstovall6478
      @reginaldstovall6478 3 ปีที่แล้ว

      Dealership, the auto part place don’t carry that part

    • @curtisnewton2741
      @curtisnewton2741 3 ปีที่แล้ว +3

      Found it on Amazon for $57. Installing mine now.

    • @anitraturner5748
      @anitraturner5748 3 ปีที่แล้ว

      @@curtisnewton2741 heyyy was this a new part from Amazon? And what was the actual part name? It seems that there’s a few part names for this

    • @geraldstewart2556
      @geraldstewart2556 3 ปีที่แล้ว

      I had to go to the dealership

    • @anagonzalez-vh7jc
      @anagonzalez-vh7jc 3 ปีที่แล้ว

      How much at the dealership?

  • @SS-zl3go
    @SS-zl3go 3 ปีที่แล้ว +2

    With no vacuum I assume you lost all power assist as well?

    • @HidalgoMotorsCo
      @HidalgoMotorsCo  3 ปีที่แล้ว +1

      that's exactly what happened, I technically lost the brakes.

  • @WilsonChristopher87
    @WilsonChristopher87 2 ปีที่แล้ว

    Did you have to update the software. Or was it plug and play?

  • @BrieJhayNicole
    @BrieJhayNicole 2 ปีที่แล้ว +1

    This just popped on my 2019 chevy trax, don't know what it means

  • @wrenchinrust4741
    @wrenchinrust4741 ปีที่แล้ว

    Do you have a link on where to get the part?

  • @diegomorales7538
    @diegomorales7538 3 ปีที่แล้ว

    Thanks for the video!

  • @anagonzalez-vh7jc
    @anagonzalez-vh7jc 3 ปีที่แล้ว +1

    Why was your engine light still on?

    • @HidalgoMotorsCo
      @HidalgoMotorsCo  3 ปีที่แล้ว +1

      That’s a good question. I don’t remember I think it needed a tune up or some sensor replaced. But the fix definitely worked!

  • @brucejones5527
    @brucejones5527 ปีที่แล้ว +1

    Thx for this video

    • @HidalgoMotorsCo
      @HidalgoMotorsCo  ปีที่แล้ว

      Thank you for watching Mr Jones. We really appreciate. Hope we were able to help.

  • @williamhealey6862
    @williamhealey6862 4 หลายเดือนก่อน

    Great video. Ty

  • @johnmitchell8925
    @johnmitchell8925 ปีที่แล้ว

    I guess they are lucky that it didn't damage the cam like I've seen on the 1.5

  • @latra07
    @latra07 2 ปีที่แล้ว

    Where are you located in Houston??

  • @virginiabell1186
    @virginiabell1186 2 ปีที่แล้ว

    Can anybody tell me what that loud noises sounds like a vacuum when you turn the car on every time I take it to the dealership they say it’s normal but I would still like to know what exactly is it what it is and how to somehow mute it or lower the noise please and thank you

  • @akaSolanoWZM
    @akaSolanoWZM 2 ปีที่แล้ว

    I’m dealing with this problem right now, are you located in Houston ? I was planning on taking my car to brake check , but I don’t want them to fix everything but the problem. What do you think I should do?

  • @matthewherrera3243
    @matthewherrera3243 6 หลายเดือนก่อน

    Hey I noticed that the vehicle getting repaired here was at 109,000 miles... mine just had this happen at 112,500
    Looks like they might have a life expectancy 😆

  • @matthewward6033
    @matthewward6033 4 วันที่ผ่านมา

    You not show how to disconnect the brake booster vacuum line.

  • @juliusgonwild2478
    @juliusgonwild2478 2 ปีที่แล้ว

    My brake pedal got hard. I watched some videos and replaced the pump. It was broken inside. But the new one made the car work fine again. But the same day on the way home my pedal got hard again. I checked the pump and no suction.im guessing its broken again but why?

    • @horacecomegna335
      @horacecomegna335 4 หลายเดือนก่อน

      Because you have a defective brake booster.

  • @freshcoatcustompaint8870
    @freshcoatcustompaint8870 2 ปีที่แล้ว

    Where did you get the part??

  • @jerrylauber7311
    @jerrylauber7311 ปีที่แล้ว

    Any idea why these go bad?

  • @shaneladue4236
    @shaneladue4236 3 ปีที่แล้ว

    my gasket won't come off the block? what should i do

  • @tijoe420
    @tijoe420 2 ปีที่แล้ว

    Je ne comprends pas, tous semble cassé, et tu remonte l'ensemble, sans rien changer.
    ???

  • @jessicacis8246
    @jessicacis8246 3 ปีที่แล้ว +2

    How much did you charge for this repair?

    • @HidalgoMotorsCo
      @HidalgoMotorsCo  3 ปีที่แล้ว

      It was my car, I did it for free :) are you in Houston, Tx?

    • @jessicacis8246
      @jessicacis8246 3 ปีที่แล้ว

      Hidalgo Motors Co TV no I’m in Florida... I had this issue with my car and was researching the issue. I took it to a dealership and got it fixed. About $400

    • @curtisnewton2741
      @curtisnewton2741 3 ปีที่แล้ว

      @@jessicacis8246 it’s ridiculous how much dealerships charge for this considering the part is only $60. Mine wanted to charge $600 for repair along with $130 diagnostic check first.

    • @wowbmature
      @wowbmature 3 ปีที่แล้ว

      @@HidalgoMotorsCo I'm in houston but cannot locate that part for the life of me, where did you find it?

    • @reddog9401
      @reddog9401 2 ปีที่แล้ว

      Great video brother, keep them coming. I am looking at the pcv valve and wondering what kind of screw is that?how in the world does that come out,never seen one like it,be nice if we can get a video on it.thanks brother.

  • @ChrisTheCarnaGe
    @ChrisTheCarnaGe ปีที่แล้ว +3

    I am beyond frustrated!

    • @HidalgoMotorsCo
      @HidalgoMotorsCo  ปีที่แล้ว +1

      jeez my friend sorry about that. we really hope you were able to fix it.. next time we will make a video showing how to remove vacuum hoses.

    • @ctchard
      @ctchard หลายเดือนก่อน

      @@HidalgoMotorsCo I know I`m late to this comment, just wondering if the video on how to remove the hose was ever posted, dealing with this now, and I don`t want to take the chance of damaging anything in the removal.

  • @eliteeletronicaWORLD
    @eliteeletronicaWORLD ปีที่แล้ว

    P050f?

  • @konchoktharchen6458
    @konchoktharchen6458 ปีที่แล้ว

    If anyone have gmc terrain 2019 with backup camera angle problem, when you release brake while stop and shows Service brake assist , sometime service parking brake , steering assist. It could be just battery because mine is gone after replacing my car battery. check your battery before replacing it!!

  • @justinneavez829
    @justinneavez829 2 ปีที่แล้ว

    What’s the actual name of the part.?

  • @stansmith8158
    @stansmith8158 9 หลายเดือนก่อน

    lol fast and easy 😮