7 Symptoms of a Bad Brake Booster Check Valve | How To Know If Brake Booster Check Valve is BAD

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ก.ย. 2024
  • When the braking system starts to underperform, identifying the cause is very important to maintain your safety on the road. Inadequate braking capability has a significant risk, particularly if it occurs unexpectedly. A potential reason behind less braking performance is a faulty brake booster check valve which we’re going to talk about in this video.
    Also Check Out:
    Bad PCV Valve?
    • 10 Common Symptoms of ...
    Bad Purge Valve?
    • 6 SYMPTOMS OF A BAD PU...
    Your support is much appreciated as we put a lot of work into our videos. We hope you found this one helpful. Thanks for your continued support and appreciation for the content. Remember to like, comment and subscribe to the channel with your bell notifications on to never miss out on our future content.
    Thank you for Watching!
    #BrakeBoosterCheckValve #BadBrakeBooster #BadBrakeBoosterCheckValve #BadBoosterCheckValveSigns #BadBrakeBooster #BrakeBoosterValveDiagnostics

ความคิดเห็น • 19

  • @ryanlindley6476
    @ryanlindley6476 4 หลายเดือนก่อน +10

    IT DOES NOT DRAW VACUUM FROM THE ATMOSPHERE, IT GET VACUUM PRESSURE FROM THE MANIFOLD OR SOMEWHERE ELSE ON THE INTAKE CREATING VACUUM PRESSURE FROM THE PISTONS PULLING AIR IN ON THE INTAKE STROKE OR IN A SUPERCHARGED ENGINE YOU NEED TO GET VACUUM FROM THE FRONT OF THE SUPERCHARGER SINCE YOU HAVE A POSITIVE PRESSURE INDUCTION SYSTEM RATHER THAN A NEGATIVE PRESSURE INDUCTION SYSTEM.

    • @fixit3879
      @fixit3879  4 หลายเดือนก่อน

      Thank you for the comment.

    • @joshscott8678
      @joshscott8678 หลายเดือนก่อน +1

      So if it doesn't get air from the atmosphere there must be canned air. Guess thief's got mine

  • @Kelvin-b3j
    @Kelvin-b3j 10 วันที่ผ่านมา

    Thank you for sharing 👍 😊

  • @enidra5388
    @enidra5388 4 หลายเดือนก่อน +1

    bad explanations

    • @fixit3879
      @fixit3879  3 หลายเดือนก่อน

      Thank you for your feedback.

  • @iamkhtray
    @iamkhtray 23 วันที่ผ่านมา

    When I press the brake pedal, it is hard and difficult to start the car (on the next day)? but the brake can stop the car normally.... does anyone know the problem?

    • @MrDeano-bm8qg
      @MrDeano-bm8qg 13 วันที่ผ่านมา

      That sounds like a booster or a check valve.
      If you want to check the booster, start the car and let it idle for about 30 seconds to a minute until it builds brake pressure (vacume). Then apply the brakes and cut the car off. If your foot moves while the car is off, you have a bad booster and it's leaking somewhere.
      To test the check valve it's super easy, it's a one-way valve. Blow are in both ways. It should be blocked on one end of the valve, if not, then it's your check valve

  • @morfeo904
    @morfeo904 4 หลายเดือนก่อน

    Ford Edge defect 😕
    Press the spongy brakes and you hear a sucking or hissing sound. I guess that is the faulty vacuum .

    • @fixit3879
      @fixit3879  3 หลายเดือนก่อน

      Thank you for your feedback.

  • @hoopallday9469
    @hoopallday9469 3 หลายเดือนก่อน

    Let my ex drive my genesis coupe and it had a faulty brake booster andddddddd he crashed it

    • @fixit3879
      @fixit3879  3 หลายเดือนก่อน

      Brake pedal can be hard to press without the brake booster. I am sorry about the car crash. Thank you for sharing.

  • @muraleedharanp1310
    @muraleedharanp1310 หลายเดือนก่อน

    👍

  • @sirenswhispering
    @sirenswhispering หลายเดือนก่อน

    i bought a new jegs brake booster and master cylinder, i renew all the hoses, drums, and pads with lines, and there is no any leaking, my engine is 4.3 stock with holley sniper 1. I wonder why it happened sometimes, for example i drove about 45 min without any problem, when i wanted to park my car, suddenly i lose a brake and become stiff and immediately i push it again came back to normal. I did all of your test and could not find problems, as i said sometimes it will happen.

    • @fixit3879
      @fixit3879  หลายเดือนก่อน +1

      Your intermittent brake issue could be due to a faulty brake booster or vacuum leak, so check the installation and connections. Ensure the master cylinder is properly bled and check for air bubbles or contamination in the brake fluid. Verify that the calipers aren’t sticking and that all brake lines are clear and properly connected. Also, inspect for any electrical or sensor issues if applicable. If the problem persists, consulting a professional mechanic for a thorough diagnosis might be necessary. Hope this helps. Good Luck!

    • @MrDeano-bm8qg
      @MrDeano-bm8qg 13 วันที่ผ่านมา +1

      Check your manifold vacuum. If you're not getting enough vac it may take a couple pumps to build. Especially after a a period of wide open throttle or heavy acceleration
      Hope this helps. If your not getting enough vac, check for leaks and ensure carb is dialed in.

    • @MrDeano-bm8qg
      @MrDeano-bm8qg 13 วันที่ผ่านมา +1

      It goes back to normal because it builds vac at idle. You can feel that when you first start a vehicle up. They take a few seconds to build vac at idle.

  • @angelobryan4699
    @angelobryan4699 หลายเดือนก่อน

    Sound of rushing air?

    • @fixit3879
      @fixit3879  3 วันที่ผ่านมา

      Yes. Thank you for sharing.