A Function the Xtool has that the Launch, Autel, and Thinkdiag 2 don't have.

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ธ.ค. 2024

ความคิดเห็น • 129

  • @737mechanic
    @737mechanic  6 หลายเดือนก่อน +1

    XTOOL D8W New Upgraded Automotive Diagnostic Tool
    amzn.to/3TH7lFF
    Autel MaxiSys MS906 PRO Scanner, 2024 MS906PRO ECU Coding
    amzn.to/3vxcmIN
    LAUNCH X431 V+ PRO 4.0 2024 Elite Scan Tool, Topology Mapping, 10.1
    amzn.to/4awt21W
    Thinkdiag2 All System Bidirectional Control OBD2 Diagnostic Scanner
    amzn.to/3vtZbIH
    LAUNCH X431 CRP919EBT Elite OBD2 Scanner
    amzn.to/3UyWOxL
    737mechanic Amazon Store Front
    www.amazon.com/shop/737mechanic/list/CR3BU74FTDU1?ref_=cm_sw_r_cp_ud_aipsflist_aipsf737mechanic_W4QMHMJ1JD67FDBCQHRK

  • @SSBryanXInfinity
    @SSBryanXInfinity 8 หลายเดือนก่อน +4

    Anything you recommend better than D8? I want one that does nearly all. Xtool is known for having special functions that not work on all vehicles. When it comes to key programmimg, if the original key never hard key remote start, is there a way to write the functionality? Any suggestions would be appreciated.

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน +1

      I have been very impressed with the Launch CRP919EBT. amzn.to/3VV6pjz also the Otofix D1 amzn.to/4d3Q3LQ is very nice.

    • @WIZEMART
      @WIZEMART 5 หลายเดือนก่อน +1

      D9 PRO/ D9S PRO possibly? Depends on your spending capacity. But a bit more $$$ will give you a Snap-On though… It’s like Prius vs Tesla… illusion of choice…

  • @bernardaflores1720
    @bernardaflores1720 8 หลายเดือนก่อน +12

    Great video, you almost need a cheat sheet that tells you the abilities and disabilities of each scanner. The marketing brochure would make it sound like it can do everything but you also limited on what the car can provide.

  • @zw3245
    @zw3245 8 หลายเดือนก่อน +9

    Hi, nice comparison. xtool is known above all for its key reprogramming capabilities, this is one of its strong points, but it also has many weak points...

    • @Banelegumata
      @Banelegumata 7 หลายเดือนก่อน

      can it deal with bmw ews? i am having an issue with my BMW right now

  • @waferchapel
    @waferchapel 8 หลายเดือนก่อน +2

    I've had this XTool D8 for about 2 years. It has served me very well and it pulls pin codes. I'm looking to upgrade to a tool that can work on Toyota Hybrids and do the SPS function on GM vehicles. I don't know where to turn for good advice. It's time for me to step up my diagnostic arsenal.

    • @luismalave4887
      @luismalave4887 หลายเดือนก่อน

      Best thing for sps programming on the cheap is a mongoose cable from Drew tech and make an account on acdelco to flash modules.

  • @reianonymous9487
    @reianonymous9487 26 วันที่ผ่านมา +2

    You can pull the PIN from the Module Information. You just have to play around with the tool, be it Launch or Autel, works for most of the models without a direct option in key programming section. You have to head into individual module, which again depends on the make and model.

    • @737mechanic
      @737mechanic  26 วันที่ผ่านมา +1

      No, you can't. You have to have a scanner capable of pulling the PIN codes. Autel will not, Launch will on some vehicles, and Xtool will on many vehicles. Otherwise, you have to have a dedicated key programmer.

  • @davidjames2723
    @davidjames2723 8 หลายเดือนก่อน +5

    I just wanted to let you know that I have a D8BT and I had to go to the dealer to get the PIN code on my 06 Dodge Caravan. As long as you have it registered in your name, they will give you the PIN code for free. But the my x tool D8BT did not retrieve the PIN code for me, but after I received the PIN code from the Dodge dealer, my Xtool was able to program the key for me that I had made from a locksmith, although anyway I am happy with my x tool scanner

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน +1

      Thanks for the info, every Dodge and Jeep that I have tried it on it has pulled the pin code with no problem.

    • @SilvexPhoto
      @SilvexPhoto 8 หลายเดือนก่อน +1

      maybe needs an update?

    • @davidjames2723
      @davidjames2723 8 หลายเดือนก่อน

      @@SilvexPhoto I update it regularly, it's just certain vehicles it won't generate the PIN code for you

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน

      @@SilvexPhoto Possible.

    • @eap.productions
      @eap.productions 5 หลายเดือนก่อน

      My D7S can read pin code and program keys no problem with my 2017 Dodge Caravan GT

  • @FihnIsTech
    @FihnIsTech 8 หลายเดือนก่อน +5

    I think it’s pretty common knowledge that some tools have IMMO functions and some don’t. Aka my $500 IM508 Autel can pull the pin# off of most Chrysler products. This is because it is an actual IMMO tool. Pretty crazy how these aftermarket tools can do this seeing as the OEM tool (Witech) can not.

  • @AidanThompson-p2d
    @AidanThompson-p2d 2 วันที่ผ่านมา

    Does this correct odometer

  • @calholli
    @calholli 8 หลายเดือนก่อน +2

    I've seen the wired D8 as low as four hundred fifty.. The LAN/ bluetooth versions are usually higher though.

  • @don.timeless4993
    @don.timeless4993 6 หลายเดือนก่อน +5

    i was looking to get D9S but it have 6500mAh battery with bigger screen & that mean the battery will not last long without charging! while the D8W 10000mAh with small screen & i was disappointed! thats was really weird for me! but still D8 is a beast. Xtool nailed it with their tools awesome features & subscription & prices! i bought D8W & it's in the way. 1745

    • @feriveysi3103
      @feriveysi3103 4 หลายเดือนก่อน

      Why u f leave this comment in all the youtube xtool videos 😂

    • @feyrrari
      @feyrrari 3 หลายเดือนก่อน

      I got the D7.

    • @feyrrari
      @feyrrari 3 หลายเดือนก่อน

      ​@@feriveysi3103 cus he supports the brand 🌌🏌‍♂️

    • @Maxx1676
      @Maxx1676 28 วันที่ผ่านมา

      @@feriveysi3103 first time I read this.....

  • @joegillesp7340
    @joegillesp7340 5 วันที่ผ่านมา +1

    Is Chevrolet key learn code capability included in tool d8s

    • @737mechanic
      @737mechanic  5 วันที่ผ่านมา

      Depends on the year. See the below video.
      th-cam.com/video/h0mCjiLevCI/w-d-xo.html

  • @JCnordic2983
    @JCnordic2983 14 วันที่ผ่านมา +1

    Cabt you get from manyfacturer ir dealer ?

  • @philh9238
    @philh9238 8 หลายเดือนก่อน +1

    Will xtool be joining nastf? Where you need a lsid to use your aftermarket scanner to do IMMO functions

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน

      If they do it will probably only be their D9.

    • @philh9238
      @philh9238 8 หลายเดือนก่อน

      Does it have capabilities to perform parameter reset on 2015 and newer fords?

    • @philh9238
      @philh9238 8 หลายเดือนก่อน

      @@737mechanic does it have capabilities to do parameter reset on 2015 and newer fords? Have a chance to see yet?

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน

      @@philh9238 I can't say for sure but next time I have it connected to a 2015 ford or newer I will see if the option is there.

  • @unclemarksdiyauto
    @unclemarksdiyauto 8 หลายเดือนก่อน +1

    Nice info. Looks like t(e Xtool also does topology? Nice! Bi directional? Can it activate things like run / toggle on/off fuel pump, windows, wipers etc? If so, great tool for the money!

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน

      Yes, it is fully bi-directional and has topology. It is a great scan tool for the money indeed.

    • @unclemarksdiyauto
      @unclemarksdiyauto 8 หลายเดือนก่อน +3

      @@737mechanic Ihave the Thinktool pro. I wanted the pros but accidentally got the pro. No topology. Some of these tools has so many extra little things between each model that is hard to make a informed purchase when buying and for just a extra $50… Then there is always something better the next step up would do, but you are unaware what that extra $100 gives you.

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน

      @@unclemarksdiyauto You are exactly right about that. That is why I do a lot of scan tool walkthroughs on different cars so people can get an idea of what certain scan tool s are capable of on different makes and models.

  • @jerseycowboy1
    @jerseycowboy1 2 หลายเดือนก่อน +1

    Will the Xtool D7 with 6 or 9 pin adapter scan semi trucks, specifically cummins x15

    • @737mechanic
      @737mechanic  2 หลายเดือนก่อน

      What manufactures truck?

    • @jerseycowboy1
      @jerseycowboy1 2 หลายเดือนก่อน

      @@737mechanic kenworth T680

    • @737mechanic
      @737mechanic  2 หลายเดือนก่อน

      @@jerseycowboy1 The xtool doesn't support that. But the LAUNCH CRP129 HD Heavy Duty Truck Scanner does.
      amzn.to/4eSmHk3
      If you want a very nice scanner for HD trucks then the Launch X431 PRO3S+Smartlink HD Heavy Duty Truck Scanner is the guy.
      amzn.to/4feAml2

  • @dougjstl1
    @dougjstl1 26 วันที่ผ่านมา +1

    What's another way to get your PIN code

    • @737mechanic
      @737mechanic  25 วันที่ผ่านมา

      Dealer, locksmith, or a scan tool that can pull it.

  • @404notfound.....
    @404notfound..... 8 หลายเดือนก่อน +3

    Unbelievable, I want to run out and grab the xtool D8. Who knew??

    • @educationaltvshows9950
      @educationaltvshows9950 8 หลายเดือนก่อน +1

      D8s (wired) i saw 400-450 bucks at ali. Has topology wich is insane at the price!

    • @fernandoleopoldomelladocor1392
      @fernandoleopoldomelladocor1392 8 หลายเดือนก่อน

      El D8 es muy superior a los otros equipos qué expones! Saludos

  • @bautistakhentlgieb.8873
    @bautistakhentlgieb.8873 8 หลายเดือนก่อน +1

    love the thinkdiag 2 sir small handy and almost accurate ❤😊 but don't have a pin key sad

  • @smgarc
    @smgarc 3 หลายเดือนก่อน +1

    Does xtool work on land Rover

  • @thegrave2000
    @thegrave2000 5 หลายเดือนก่อน

    This is weird, a friend of mine which is very much into these things said any of those tools normally requires an external device attached to read the PIN code. Are you able to do this on 2023/2024 cars?

  • @SaerTurner-wn2qh
    @SaerTurner-wn2qh 4 หลายเดือนก่อน +2

    on my Launch you get the pin and pass code from the Security no the key programing and it does and will retrieve the pin and pass code its juts in a different section than the Xtool

    • @737mechanic
      @737mechanic  4 หลายเดือนก่อน

      What manufacturer?

  • @camerasniper4816
    @camerasniper4816 8 หลายเดือนก่อน +1

    im in the market for one of these scan tool will the xtool reprogram the modules say like the ABS module on a ford edge or a Infiniti Q60?

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน +1

      It will on the Ford for sure but I am not sure about the Infiniti.
      Here is a video I did on a 2012 jeep patriot.
      th-cam.com/video/_mCswAdm1Co/w-d-xo.html

    • @roymunemo4834
      @roymunemo4834 6 หลายเดือนก่อน +1

      I have done w204 abs module replacement with my xtool

  • @bemek01
    @bemek01 3 หลายเดือนก่อน +1

    thinkdiag for me is the way to go after trying launch and xtool in the 500-800€ range.

  • @SMOKEY-JAYS-DIESEL
    @SMOKEY-JAYS-DIESEL 8 หลายเดือนก่อน +3

    Xtool is also a time machine it can reverse millage

    • @roymunemo4834
      @roymunemo4834 6 หลายเดือนก่อน +1

      Xtool powerfull machine on mileage

    • @eap.productions
      @eap.productions 5 หลายเดือนก่อน +2

      Just in case you drove with the wrong size tires, or had to replace the ECM 😉

    • @SMOKEY-JAYS-DIESEL
      @SMOKEY-JAYS-DIESEL 5 หลายเดือนก่อน +1

      @@eap.productions LOL 🤣🤣 for sure

  • @prombeats
    @prombeats 7 หลายเดือนก่อน +1

    do you know any obd2 tool to reset adblue warning in 2020 renault car? will THINKDIAG work?

    • @737mechanic
      @737mechanic  7 หลายเดือนก่อน

      The Thinkdiag says it is supported.

    • @pablo123b
      @pablo123b 6 หลายเดือนก่อน

      none of them yet unless you spend over a £1000 you need to reset the adblue NOX sensor then we are knackered lol

    • @WIZEMART
      @WIZEMART 5 หลายเดือนก่อน +1

      Yeah it’s again the Brand and make and compatibility. Different brands act differently. Try to check specs of D9s PRO. As far as I remember it’s capable of doing it on some Brands.

    • @737mechanic
      @737mechanic  5 หลายเดือนก่อน

      @@WIZEMART I am about to do a review on the xtool D9Pro.

  • @ولدزايد-ذ2غ
    @ولدزايد-ذ2غ 6 หลายเดือนก่อน +3

    New 2024 D8W is 5000 mAh depending of Xtool website

    • @737mechanic
      @737mechanic  6 หลายเดือนก่อน +2

      I wouldn't worry about battery capacity. Whatever it is you will be fine.

  • @joostverhoef5035
    @joostverhoef5035 2 หลายเดือนก่อน +1

    I have a x100 max ... Key wise its oke but diag side is verry pore my 3 year older autel mp808 does allot more .. just bought the im608 loving it already

  • @davlet53209
    @davlet53209 6 หลายเดือนก่อน +2

    The key PIN code is on the ignition

    • @davidsin4761
      @davidsin4761 4 หลายเดือนก่อน

      @davlet53209 can you clarify what you mean by on the ignition? Thanks in advance!

  • @danielfriday5411
    @danielfriday5411 3 หลายเดือนก่อน +1

    In terms of coding I think 🤔 the launch tools are leading very effective

  • @efibendor1
    @efibendor1 7 หลายเดือนก่อน

    Hey you seem to be very knowledgeable may I pls ask what is the difference between the various tazer tools and the Xtool?

  • @joshrios459
    @joshrios459 3 หลายเดือนก่อน +4

    tested the x100 max on multiple audis with little or no functionally nor could i get anything from a 02 saturn. i gave up and amd returning it. for the eeprom reader side i didnt even bother testing it once i came to the conclusion the xtools lied to me about what it could do. im not paying 1200 for a glorified eeprom tool that 1 30 dollar tool can do.

    • @737mechanic
      @737mechanic  3 หลายเดือนก่อน

      Interesting. Judging by how much key programming ability the regular scan tools have, I would have figured their dedicated key programmer would have been good.

  • @TurnThemWheels
    @TurnThemWheels 8 หลายเดือนก่อน +1

    Interesting it pulls the PIN codes and others don’t

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน

      I have pulled pin codes on dodge, jeep, Nissan, and GM and no other scan tool I have seen can do that.

    • @TurnThemWheels
      @TurnThemWheels 8 หลายเดือนก่อน

      @@737mechanic yeah XTool is great about that

  • @alexanderakilov4349
    @alexanderakilov4349 4 หลายเดือนก่อน +2

    I bought this stupid XTool D8 and it doesn't recognize my Mazda CX-30. It says that all software is up to date. Very disappointed.

    • @737mechanic
      @737mechanic  4 หลายเดือนก่อน

      What year mazda?

  • @mbengobentobias3669
    @mbengobentobias3669 2 หลายเดือนก่อน +1

    If you gat the im508 or 608 is the best for now

    • @737mechanic
      @737mechanic  2 หลายเดือนก่อน

      Those are dedicated key programmers, not dedicated scan tools. I would expect both of them will program keys with no problem. The Xtool is a dedicated scan tool with great key programming capabilities.

  • @willieriechert5950
    @willieriechert5950 6 หลายเดือนก่อน +2

    To be fair you must use im series on Autel

    • @737mechanic
      @737mechanic  6 หลายเดือนก่อน +1

      That wouldn't be fair because the IM series is a dedicated key programmer.

    • @Marshall_Lock_and_Key
      @Marshall_Lock_and_Key 4 หลายเดือนก่อน

      The Autel im series also does Diagnostics, not just key programming

  • @altinom.miguel5549
    @altinom.miguel5549 6 หลายเดือนก่อน

    friend also makes videos about the Xtool D7S. about programming. please, I want to buy this.

  • @pk6336158
    @pk6336158 หลายเดือนก่อน

    Autel and Launch immo tools can read pin not those.

    • @737mechanic
      @737mechanic  หลายเดือนก่อน

      Any dedicated IMMO scan tool will be able to read the PIN codes but dedicated IMMO scan tools usually won't but the Xtool is very good at pulling PIN codes from many vehicles.

    • @pk6336158
      @pk6336158 หลายเดือนก่อน

      @@737mechanic That`s true but if you had a im608 the pin could be reed, Autel and launch don`t put they pin readers in the they diagnostic scan tool only immo scan tool, same way as how the Autel and launch immo tools can`t do programming but they diagnostic focus ones can, xtool put them in both.

  • @Stedman09
    @Stedman09 6 หลายเดือนก่อน

    But with Thinkdiag 2, other models it can extract PINs

    • @737mechanic
      @737mechanic  6 หลายเดือนก่อน

      I haven't had it connected to many cars that have PIN codes but the couple I have it was unable to pull the PIN codes.

  • @alexkononenko5402
    @alexkononenko5402 2 หลายเดือนก่อน +1

    I have autel IM 508 and it reads the pin

    • @737mechanic
      @737mechanic  2 หลายเดือนก่อน

      Yes, that is a dedicated Key Programmer so I would expect it should read the PIN.
      But there are things it wont do as a scan tool that a dedicated scan tool will do.

  • @Jorge-kn8oj
    @Jorge-kn8oj 8 หลายเดือนก่อน +2

    You know nastf is fighting to take that away. And most tools, even the few thousands ones, will be useless to pull pin codes to add a key or even replace any part that requires pin codes like a bcm replacement when this new rule, yes, it's a rule, not a law takes effect. That means all working people will have to make their own business apply for a 1 million dollar insurance and agree to a background check, which I agree with a background check and proof you are legit but now having to build my own firm and get insurance that's an extra cost which would past to customers and the cost of repairs are high as it is. Please do a video of tools not participating in that nastf and tool manufacturers that are not participating could easily charge extra and do a background check to use the immo side of the tool, easier access and still have the same security as nastf but without the hassle of building your firm getting a 1 million dollar insurance and so forth. Thanks for your videos.

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน +2

      Yea I know. It's all about the money even though they claim they are trying to lower car thefts.

    • @metapeutic
      @metapeutic 3 หลายเดือนก่อน +1

      They won't do shit and can't stop anything. Do you think xtool went to each car maker and said pretty please can we use your software? There will always be a way to bypass all these rules.

    • @Jorge-kn8oj
      @Jorge-kn8oj 3 หลายเดือนก่อน +1

      @metapeutic Here is an update for you. Autel just announced that their immobilizer tools will no longer support all keys lost for toyota vehicles. And xtool lost their canfd rights to add keys to new gm vehicles and can't calculate pin codes for toyota without oe software. So, as new tools are coming out with coverage for these vehicles, others are losing their rights. And soon it will turn again. They are all pushing for oe software and no more aftermarket tools. Obdstar and xhorse seem to be next on the list for losing some coverage also, I believe.

    • @GMurphy9
      @GMurphy9 หลายเดือนก่อน

      ​​@@Jorge-kn8ojAny recommendations on a proscanner with immo/key program and topology?

  • @thejavelin7832
    @thejavelin7832 หลายเดือนก่อน +1

    It's a real shame that this tool is not Autoauth authorized. Suprising, really. And, no web browser. While it sure would be convenient to retrieve the PIN on Chrysler vehicles, it's not a big deal to get the PIN from. The dealer. Just need to have the customer go to the service counter, provide proof of ownership, and they will give them the PIN.

    • @737mechanic
      @737mechanic  หลายเดือนก่อน

      It does have a browser but yea the lack of autoauth could be an issue if you work on or own a 2018 chrysler.

    • @donaldholder2434
      @donaldholder2434 15 วันที่ผ่านมา

      The xtool has browser and PIN code retrieval I think What one are you talking about

  • @thesnipersnestandmore7461
    @thesnipersnestandmore7461 8 หลายเดือนก่อน +2

    I want to see it program an ir key for Mercedes Benz 😂😂😂

  • @wackey3455
    @wackey3455 8 หลายเดือนก่อน +2

    All them special functions don’t work on different cars. I bought a xTool d7 ended up selling it because very limited to what I could do all them special functions. Let say you want to do a brake job well go into special functions and it won’t work on a lot of cars don’t be fooled by this video I say it again I was very disappointed.I ended up doing a lot of research so I went for the Autel 906ts pro a bit pricey but you pay for what you get.Now it’s 600 a year to update mine but I’m so happy with it. There’s to model one is ts does online programming and I think bk model does not. Don’t buy these xtools. And fair play to this youtuber doing this review but a word of advice don’t buy this. When you plug it up to a car I can’t stress this enough only a few special functions work

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน

      I can't comment on the D7 since I have never owned one but the D8BT special functions have all worked for me on lots of different cars except for 2 things that xtool fixed. I have had a Autel MS906TS for probably 8 years now and it has had its share of issues that had to be fixed with updates.
      My go to scan tool for the past 2 years has been my D8BT.
      If you are talking about the special function button that list the 36 or so special functions you need to realize those are year, make, and model specific. Meaning that if your car does not have electronic parking brake you can't expect the electronic parking brake special function to retract the calipers.
      What year make and model did you have problems with?

    • @wackey3455
      @wackey3455 8 หลายเดือนก่อน

      @@737mechanic Vw golf Mk6 in fairness I haven’t tried the D8 model so I can’t be 100% sure how good it is.i do know if you go into live data on Autel it gives the key code. I really not sure about d8 model maybe I shouldn’t have commented on it.cheers

    • @auteltester
      @auteltester 2 หลายเดือนก่อน

      @@737mechanic can you re prog ecus? or the ford clusters ??

  • @Doorcloserpro
    @Doorcloserpro 8 วันที่ผ่านมา

    Hmm that a lot of key for a vehicle

  • @courier11sec
    @courier11sec 4 หลายเดือนก่อน +1

    Uh oh. Looks like your autel has a flat tire. 🤕

  • @krisn8820
    @krisn8820 26 วันที่ผ่านมา +1

    My xtool d9 shines at programming keys, but sucks at functional tests that actually work. Especially vgt actuator calibration and countless others. If all you do is keys it might be for you. Otherwise I recommend staying away from xtool. I have extensive use and dealings with xtool support. I will never buy another xtool. Especially they don't support SGW. They wanted me to remove my reviews on Amazon and offer to pay me. I refused to remove my honest reviews.

    • @thayerhussey8888
      @thayerhussey8888 10 วันที่ผ่านมา

      I bought an xTool D9S a few months ago. It's been updated with all updates as of Dec 2024. I've tried more times than I can count to program a new IMMO Fob for a 2015 Toyota Highlander to replace one lost. I get nothing but Errors that say "This function is not supported for your device. Contact your dealer or xtool aftersales services." I've contacted xToolGlobal support by email (the only method available unless I call Shenzen, China), but no response yet. I know the D7 and D8 work great for this ... and your comment that your D9 works too. Any idea why my D9S doesn't work? Any suggestions on who/how/where I can get some answers and support? I'd really appreciate any help and advice you can offer!

  • @cerascetea
    @cerascetea 8 หลายเดือนก่อน

    Sell me one of our scan tool

  • @oneanddonediy
    @oneanddonediy 8 หลายเดือนก่อน +1

    My comments get getting deleted....

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน +1

      Why are they getting deleted?

    • @frankcee4342
      @frankcee4342 4 หลายเดือนก่อน

      If your browser uses enhanced tracking protection at the address field, turn it off. It fixed the problem for me.

  • @oneanddonediy
    @oneanddonediy 8 หลายเดือนก่อน

    NASTF

  • @robertfrancisco1193
    @robertfrancisco1193 3 หลายเดือนก่อน +1

    ya some of these co. are screwed up AUTEL has more of there share of issues. cant say anything about others but you have showed us how much there engineers know. pitiful.

  • @MrBouziani2010
    @MrBouziani2010 5 หลายเดือนก่อน +1

    .

  • @dtnel
    @dtnel 8 หลายเดือนก่อน

    In the near future you’ll wake up, go to program a car key in and you’ll be presented with a screen that asks you to input your vsp credentials.
    Legit business, have insurance l? Then you won’t have any problems getting the background check done as long as you don’t have a criminal history with recent felonies.
    Watch the 2 hr video called navigating the future of automotive locksmithing and you’ll probably wait to buy a tool for awhile.

    • @737mechanic
      @737mechanic  8 หลายเดือนก่อน +3

      You are probably correct, It sucks we don't live in a free country and so many companies feel the need to control the masses unless of course, you want to pay money then you can play the game.
      It's all about the money.

    • @WIZEMART
      @WIZEMART 5 หลายเดือนก่อน

      It also called PROGRESS - even absolutely nothing progressive was invented in last 20-30 years. Oh forgot - the mass control got in their arsenal so many inventions!!!

    • @metapeutic
      @metapeutic 3 หลายเดือนก่อน

      They won't do shit and can't stop anything. Do you think xtool went to each car maker and said pretty please can we use your software? There will always be a way to bypass all these rules.